Under Floor Heating

Amber DT-One Programmable Underfloor Heating Thermostat — Clearance Price — Was £95.86 Now £39.99 The Amber DT-One is a touchscreen programmable thermostat for electric underfloor heating systems. This listing is old stock being cleared at a reduced price — the same product continues to be available at its normal price within our Amber Underfloor Heating Thermostats range. At £39.99 (was £95.86), this is an opportunity to buy a current, fully warranted Amber thermostat at 58% off while this stock lasts. ⚠️ Old stock clearance — limited quantity at this price. Once this stock sells out, the DT-One continues to be available at its standard price via our Amber Thermostats listing. Electrical installation must be carried out by a qualified electrician. Key Features Touchscreen LCD interface — responsive touch control; large backlit display 7-day, 6-period programming — set a unique heating schedule for every day of the week with up to 6 temperature periods per day Floor, air, or dual sensor mode — configure to monitor floor temperature, ambient air temperature, or both Frost protection mode — maintains a minimum temperature (typically 5°C) during extended absences Screen lock — prevents accidental or unauthorised changes; suitable for rental properties and commercial use 16A / 3,680W load rating — compatible with most electric underfloor heating mats and cables IP21 rated — suitable for bathroom zone 3 and general indoor use Standard UK back box — fits 86 × 86mm single-gang back box 2-year manufacturer’s warranty Technical Specification Brand: Amber Model: DT-One SKU: A500501 Display: Touchscreen LCD Programming: 7-day, 6-period per day Temperature range: 5°C – 40°C Temperature accuracy: ±0.5°C Sensor modes: Floor sensor, air sensor, or dual sensor Load rating: 16A (3,680W at 230V) Power supply: 230V AC, 50Hz IP rating: IP21 Back box: Standard UK 86 × 86mm Dimensions: 86mm × 86mm × 40mm Operating temperature: 0°C – 45°C Warranty: 2 years (manufacturer) What’s Included Amber DT-One programmable thermostat 3m floor temperature sensor probe Mounting frame and screws Installation and programming manual 2-year warranty documentation Also Available — Amber Thermostats Amber DT-One at standard price — same product; available at full price once this clearance stock sells out Amber DT1 Digital Thermostat — £63 · 7-day programmable; current range Amber DT-two+ Smart Thermostat — £114–£115 · Wi-Fi; Alexa & Google Home Compatible Underfloor Heating Products Amber 150W Heat Mat For Concrete Floors — 0.5–12m²; for solid/concrete subfloors Amber 100W Heat Mat For Timber Floors — 1–12m²; for timber subfloors Amber 10W/m Electric Underfloor Heating Cable — flexible loose-lay cable; 10–165m Amber 3m Replacement Floor Sensor — replacement probe if the included sensor fails Frequently Asked Questions Why is this priced lower than normal? This listing is old stock being cleared at a reduced price — the same Amber DT-One thermostat is available at its standard price of £95.86 via our Amber Thermostats listing. The product is identical, fully current, and carries the same 2-year warranty. This is simply an opportunity to buy at 58% off while this stock lasts. What size underfloor heating mat can this thermostat control? The DT-One has a load rating of 16A / 3,680W. At 150W/m², this covers mats up to approximately 24m². It is compatible with all Amber and DEVI electric underfloor heating mats and cables within this wattage limit. What is the difference between floor sensor, air sensor, and dual sensor mode? In floor sensor mode, the thermostat uses the included 3m probe to monitor the floor surface temperature directly — recommended for most installations as it protects the floor covering from overheating. In air sensor mode, the thermostat uses its internal sensor to monitor the ambient room temperature. In dual sensor mode, both sensors are active — the floor sensor sets a maximum floor temperature limit while the air sensor controls the target room temperature. Dual mode is useful where precise room temperature control is needed alongside floor protection. Does the 2-year warranty apply to clearance stock? Yes — the full 2-year manufacturer’s warranty applies regardless of the clearance pricing. The warranty covers manufacturing defects when the thermostat is installed in accordance with the installation instructions by a qualified electrician. Is this thermostat suitable for bathroom installation? The DT-One is IP21 rated, making it suitable for bathroom zone 3 (outside the immediate shower/bath area) and general indoor use. It must be installed outside zones 0, 1, and 2 (i.e. not within 0.6m horizontally of a bath or shower). All installation must be carried out by a qualified electrician in accordance with BS 7671. Can I order if the item shows as out of stock? If this clearance stock has sold out, the DT-One continues to be available at its standard price via our Amber Thermostats listing. Call us on 01603 381095 to confirm availability.

Read more less

Amber / DEVI Electric Underfloor Heating Cable Repair Kit — Fix Cable Breaks Without Full Replacement A break in your underfloor heating cable does not have to mean a full mat or cable replacement. The Amber / DEVI Electric Underfloor Heating Cable Repair Kit contains everything needed to repair a cable break in a DEVI or Amber heating mat or cable quickly, safely, and professionally. Compatible with DEVI heating mats and Amber electric underfloor heating systems. At £22, it is a cost-effective alternative to replacing the entire heating mat. ⚠️ Important safety notice. Repairing a heating mat may result in a changed output. Do not repair across cable loops. All repair work must be carried out by a qualified electrician. If in doubt, consult a Part P registered electrician before attempting any repair. What’s in the Kit 4 × Rivets 2 × Kynar heat-shrink tubing — 1/8", 25mm 1 × Cold tail — type DSWB-10, 500mm 2 × Shrink tube — 8/2, 100mm 2 × Shrink tube — 4/1, 35mm Technical Specification Brand: Amber / DEVI SKU: 18055510 Compatible with: DEVI and Amber electric underfloor heating mats and cables Application: Repair of single cable breaks in heating mats and loose-lay cables Restriction: Do not repair across cable loops Compatible Heating Products Amber 150W Heat Mat For Concrete Floors — higher output mat for solid/concrete subfloors; 0.5–12m² Amber 100W Heat Mat For Timber Floors — lower output mat for timber subfloors; 1–12m² Amber 10W/m Electric Underfloor Heating Cable — flexible loose-lay cable for bespoke layouts Amber Underfloor Heating Thermostats — DT1 digital or DT-two+ WiFi with Alexa & Google Home Amber 3m Replacement Floor Sensor — replace a faulty floor sensor probe DEVI 3m Replacement Floor Sensor — genuine DEVI OEM floor sensor probe Frequently Asked Questions Can I repair my underfloor heating cable myself? The physical repair using this kit requires careful work with heat-shrink tubing and rivets. However, all electrical work must be carried out by a qualified, Part P registered electrician. This includes testing the cable before and after repair, and reconnecting to the thermostat. Do not attempt electrical connections yourself. What types of cable break can this kit repair? This kit is designed to repair a single break in a heating cable — for example, where the cable has been accidentally cut or damaged during installation or subsequent floor work. It is not suitable for repairing across cable loops, as this would alter the electrical resistance and output of the mat, creating a safety risk. If you have multiple breaks or damage across a loop, a full mat replacement may be required. Will repairing the cable affect the heating output? Yes — repairing a heating cable may result in a changed output. The repair introduces additional resistance at the join point, which can slightly reduce the heat output in the repaired section. For most single-break repairs this change is minor, but it is important to have the repaired mat tested by a qualified electrician before returning it to service. How do I know if my cable is broken rather than a thermostat or sensor fault? A broken heating cable typically shows as a complete loss of heating with no error code on the thermostat, or an open-circuit fault reading. A thermostat or sensor fault usually shows as an error code (E0, E1, etc.) with the heating not responding correctly. A qualified electrician can test the cable resistance with a multimeter to confirm whether the cable is broken. If the fault is a sensor, see our Amber 3m Replacement Floor Sensor or DEVI 3m Replacement Floor Sensor. Is this kit compatible with all DEVI and Amber products? This kit is compatible with DEVI and Amber electric underfloor heating mats and cables, including the Amber 150W Concrete Mat, the Amber 100W Timber Mat, and the Amber 10W/m Heating Cable. If you are unsure whether this kit is suitable for your specific product, call us on 01603 381095 before ordering. Can I order if the item shows as out of stock? Yes — this product is available to order even when stock shows as zero. Please allow additional lead time and contact us on 01603 381095 to confirm availability.

Read more less

DEVI 3m Replacement Floor Sensor — Compatible with All DEVI & Amber Thermostats The DEVI 3m Replacement Floor Sensor is the genuine DEVI-branded probe for restoring accurate floor temperature monitoring to any DEVI or Amber underfloor heating thermostat. If your thermostat is displaying incorrect temperature readings, fluctuating readings, or an error code indicating a sensor fault, replacing the floor sensor probe is usually all that is needed to return the system to full performance — without replacing the thermostat itself. The 3m cable length suits most standard bathroom and room installations. Also compatible with all Amber thermostats including the DT1 and DT-two+ models. ⚠️ Sensor replacement should be carried out by a qualified electrician. The floor sensor connects to the thermostat wiring. Any work on the thermostat wiring must be carried out by a Part P registered electrician in accordance with BS 7671. Key Features Genuine DEVI branded sensor — OEM replacement probe for DEVI thermostats 3m cable length — suits most standard installations; sensor probe reaches from the thermostat position to beneath the floor covering Compatible with all DEVI thermostats — direct OEM replacement Compatible with all Amber thermostats — including DT1 and DT-two+ models Restores accurate temperature monitoring — resolves incorrect readings, fluctuating temperatures, and sensor error codes Direct replacement — no modification required Technical Specification Brand: DEVI SKU: 140F1091 Type: Replacement floor sensor probe Cable length: 3.0m Compatible with: All DEVI underfloor heating thermostats and all Amber thermostats (DT1, DT-two+) What’s Included DEVI 3m floor sensor probe You May Also Need Amber Underfloor Heating Thermostats — DT1 digital or DT-two+ WiFi; full thermostat replacement if your unit is beyond repair Amber 3m Replacement Floor Sensor — Amber-branded alternative sensor; same compatibility Amber / Devi Underfloor Heating Cable Repair Kit — fix breaks in your heating cable quickly and safely Amber 150W Heat Mat For Concrete Floors — replacement heating mat for solid/concrete subfloors Amber 100W Heat Mat For Timber Floors — replacement heating mat for timber subfloors Frequently Asked Questions How do I know if my floor sensor has failed? Common signs of a failed or faulty floor sensor include: the thermostat displaying an error code (often ‘E0’, ‘E1’, or similar depending on the model), the floor temperature reading appearing significantly higher or lower than expected, the heating not switching on or off at the correct temperature, or the thermostat displaying a fixed or unchanging temperature reading. If you are seeing any of these symptoms, replacing the floor sensor is the first step before considering a full thermostat replacement. Call us on 01603 381095 if you are unsure. What is the difference between this and the Amber 3m Floor Sensor? Both sensors are 3m probes compatible with all DEVI and Amber thermostats. The key difference is branding — this product (SKU: 140F1091) is the genuine DEVI OEM sensor, while the Amber sensor (SKU: A500101) is the Amber-branded equivalent. Both are priced at £22 and are functionally interchangeable for use with DEVI and Amber thermostats. If your system is a DEVI installation and you want the genuine OEM part, choose this product. Is this sensor compatible with my thermostat? This sensor is compatible with all DEVI thermostats and all Amber thermostats (including the DT1 and DT-two+ models). If you have a different brand of thermostat, call us on 01603 381095 to confirm compatibility before ordering. Is 3m long enough for my installation? The 3m cable runs from the thermostat position (typically on the wall) to the sensor probe tip beneath the floor covering. In most standard bathroom and room installations, 3m is sufficient. The sensor probe should be positioned approximately 300–500mm from the wall, between two cable runs of the heating mat or cable, and not directly over a cable. If your thermostat is positioned further from the heated area, call us on 01603 381095 to discuss options. Can I replace the floor sensor without lifting the floor? In most installations, the floor sensor probe is installed in a conduit tube beneath the floor covering, which allows the probe to be withdrawn and replaced without lifting tiles or the floor covering. If the sensor was not installed in a conduit, the floor covering will need to be lifted to replace it. Check your original installation records or consult your installer before ordering. Do I need an electrician to replace the floor sensor? The sensor probe itself connects to the thermostat at the wall — any work on the thermostat wiring must be carried out by a qualified, Part P registered electrician in accordance with BS 7671 and Part P of the Building Regulations. The probe replacement in the floor conduit may be carried out by a competent person, but the thermostat connection requires a qualified electrician. Can I order if the item shows as out of stock? Yes — this product is available to order even when stock shows as zero. Please allow additional lead time and contact us on 01603 381095 to confirm availability.

Read more less

Amber 100W/m² Electric Underfloor Heating Mat — Timber Floors — 1.0m² to 12m² The Amber 100W/m² Electric Underfloor Heating Mat is engineered specifically for timber floor constructions, delivering gentle, consistent radiant warmth underfoot without compromising your flooring. At 100W per square metre, it provides the correct heat output for timber subfloors — lower than the 150W concrete mat to respect the maximum temperature tolerance of timber and engineered wood floor coverings. EU-certified manufacturing and a market-leading warranty give complete confidence from installation through to daily use. Available in 14 sizes from 1.0m² to 12.0m², all 500mm wide. ⚠️ Electrical connections must be made by a qualified electrician. All wiring to the mains supply must be carried out by a Part P registered electrician in accordance with BS 7671. Not sure which size you need? Email your room dimensions to customerservice@bubblegumbathrooms.co.uk or call 01603 381095. Available Sizes & Prices 1.0m² (0.5m × 2m) — £62 (SKU: A100010) 1.5m² (0.5m × 3m) — £67 (SKU: A100015) 2.0m² (0.5m × 4m) — £74 (SKU: A100020) 2.5m² (0.5m × 5m) — £92 (SKU: A100025) 3.0m² (0.5m × 6m) — £110 (SKU: A100030) 3.5m² (0.5m × 7m) — £129 (SKU: A100035) 4.0m² (0.5m × 8m) — £189 (SKU: A100040) 5.0m² (0.5m × 10m) — £185 (SKU: A100050) 6.0m² (0.5m × 12m) — £225 (SKU: A100060) 7.0m² (0.5m × 14m) — £259 (SKU: A100070) 8.0m² (0.5m × 16m) — £299 (SKU: A100080) 9.0m² (0.5m × 18m) — £319 (SKU: A100090) 10.0m² (0.5m × 20m) — £349 (SKU: A100100) 12.0m² (0.5m × 24m) — £389 (SKU: A100120) Key Features 100W/m² output — correct heat output for timber subfloors; respects maximum temperature tolerance of timber and engineered wood 500mm wide mat — simply roll out and cut the mesh (not the cable) to fit your floor shape Pre-spaced cable on mesh — cable fixed at set spacing; quick and straightforward to install in regular-shaped rooms EU-certified manufacturing — independently tested and certified to European standards Market-leading warranty — full peace of mind from installation through to daily use Compatible with timber and engineered wood — and other floor coverings with lower temperature tolerances 14 sizes available — 1.0m² to 12.0m² to suit any room Technical Specification Brand: Amber Output: 100W/m² Mat width: 500mm Sizes: 1.0m² to 12.0m² (see size table above for dimensions) Subfloor: Timber subfloors Compatible floor coverings: Timber, engineered wood, laminate, LVT, carpet, and tile (check manufacturer’s max temperature guidance) Certification: EU certified Installation: Roll out mat; embed in adhesive or lay beneath floor covering; connect to thermostat via qualified electrician Sizing Guide Measure the usable floor area — the area where people walk, excluding fixed furniture such as vanity units, bath panels, toilet bases, and kitchen units. The mat is 500mm (0.5m) wide, so a 2.0m² mat measures 0.5m × 4m, a 3.0m² mat measures 0.5m × 6m, and so on. The mesh can be cut (never the cable) to turn corners and fit around obstacles. For irregular room shapes, the Amber 10W/m Loose-Lay Cable may be a better option. Email your room dimensions to customerservice@bubblegumbathrooms.co.uk or call 01603 381095 for a free sizing recommendation. Complete Your Underfloor Heating Installation Amber Underfloor Heating Thermostats — DT1 digital or DT-two+ WiFi with Alexa & Google Home; required to control this mat Amber 150W Heat Mat For Concrete Floors — higher output mat for solid/concrete subfloors Amber 10W/m Electric Underfloor Heating Cable — flexible loose cable for irregular or awkward floor shapes Amber Decoupling Membrane — crack isolation, waterproofing & cable carrier for cable installations Amber / Devi Underfloor Heating Cable Repair Kit — for repairing damaged heating cables Frequently Asked Questions Why 100W/m² for timber floors? Timber and engineered wood floor coverings have a lower maximum temperature tolerance than tile or stone — typically around 27°C floor surface temperature. Exceeding this can cause the wood to dry out, warp, or crack over time. A 100W/m² output is calibrated to deliver comfortable warmth without risking damage to the floor covering. For concrete and solid subfloors, the Amber 150W mat is the correct choice — concrete has a higher thermal mass and requires more energy to reach temperature. What size mat do I need? Measure the usable floor area — the area where people walk, excluding fixed furniture. For a standard bathroom, this is typically 2–4m² depending on the room size and layout. The mat is 500mm wide, so select the size whose total area matches your usable floor area. The mesh can be cut (never the cable) to turn corners and navigate around obstacles. If your room is an irregular shape, the Amber 10W/m Loose-Lay Cable offers more flexibility. Call us on 01603 381095 if you need help sizing. Can the mat be cut to fit? The mesh can be cut to allow the mat to turn corners, change direction, or navigate around obstacles such as toilet bases and vanity units. The cable must never be cut — cutting the cable will damage the heating element and void the warranty. The mat is designed to be folded back on itself at the mesh cuts to cover the required area. What floor coverings can be used over this mat? The 100W/m² output is suitable for timber, engineered wood, laminate, LVT, and carpet as well as tile and stone. Always check the floor covering manufacturer’s guidance on maximum floor temperature for underfloor heating compatibility — most timber and engineered wood products specify a maximum of 27°C floor surface temperature. For tile and stone on concrete subfloors, the 150W mat is the better choice. Is this mat suitable for use as primary heating? At 100W/m², this mat is typically used as secondary or comfort heating — supplementing an existing central heating system to take the chill off cold floors, particularly in bathrooms and bedrooms. For primary heating (the sole heat source for the room), a higher output or additional heat source may be required depending on the room’s insulation and heat loss. Call us on 01603 381095 for advice on your specific installation. Do I need a thermostat? Yes — a thermostat is required to control the heating mat and prevent overheating. We offer the Amber DT1 Digital Thermostat (£63) for straightforward programmable control, and the Amber DT-two+ Smart Thermostat (£114–£115) for Wi-Fi control via app, Alexa, and Google Home. Both include a floor sensor probe and carry a 2-year warranty. Can I order if the item shows as out of stock? Yes — this product is available to order even when stock shows as zero. Please allow additional lead time and contact us on 01603 381095 to confirm availability.

Read more less

Amber 150W/m² Electric Underfloor Heating Mat — Concrete Floors — 0.5m² to 12m² The Amber 150W/m² Electric Underfloor Heating Mat is engineered specifically for concrete and solid subfloor constructions, delivering powerful, even radiant warmth underfoot. At 150W per square metre, it provides a higher heat output than standard 100W mats — making it the correct choice for concrete floors, which require more energy to reach a comfortable temperature than timber subfloors. EU-certified manufacturing and a market-leading warranty give complete confidence from installation through to daily use. Available in 15 sizes from 0.5m² to 12.0m², all 500mm wide. ⚠️ Electrical connections must be made by a qualified electrician. All wiring to the mains supply must be carried out by a Part P registered electrician in accordance with BS 7671. Not sure which size you need? Email your room dimensions to customerservice@bubblegumbathrooms.co.uk or call 01603 381095. Available Sizes & Prices 0.5m² (0.5m × 1m) — £60 (SKU: A150005) 1.0m² (0.5m × 2m) — £62 (SKU: A150010) 1.5m² (0.5m × 3m) — £67 (SKU: A150015) 2.0m² (0.5m × 4m) — £80 (SKU: A150020) 2.5m² (0.5m × 5m) — £100 (SKU: A150025) 3.0m² (0.5m × 6m) — £120 (SKU: A150030) 3.5m² (0.5m × 7m) — £140 (SKU: A150035) 4.0m² (0.5m × 8m) — £159 (SKU: A150040) 5.0m² (0.5m × 10m) — £199 (SKU: A150050) 6.0m² (0.5m × 12m) — £239 (SKU: A150060) 7.0m² (0.5m × 14m) — £279 (SKU: A150070) 8.0m² (0.5m × 16m) — £319 (SKU: A150080) 9.0m² (0.5m × 18m) — £359 (SKU: A150090) 10.0m² (0.5m × 20m) — £399 (SKU: A150100) 12.0m² (0.5m × 24m) — £459 (SKU: A150120) Key Features 150W/m² output — higher heat output suited to concrete and solid subfloors 500mm wide mat — simply roll out and cut the mesh (not the cable) to fit your floor shape Pre-spaced cable on mesh — cable fixed at set spacing; quick and straightforward to install in regular-shaped rooms EU-certified manufacturing — independently tested and certified to European standards Market-leading warranty — full peace of mind from installation through to daily use Compatible with tile and stone — the correct floor covering for 150W/m² output mats 15 sizes available — 0.5m² to 12.0m² to suit any room Technical Specification Brand: Amber Output: 150W/m² Mat width: 500mm Sizes: 0.5m² to 12.0m² (see size table above for dimensions) Subfloor: Concrete and solid subfloors Compatible floor coverings: Ceramic and porcelain tile, natural stone Certification: EU certified Installation: Roll out mat; embed in tile adhesive; connect to thermostat via qualified electrician Sizing Guide Measure the usable floor area — the area where people walk, excluding fixed furniture such as vanity units, bath panels, toilet bases, and kitchen units. The mat is 500mm (0.5m) wide, so a 2.0m² mat measures 0.5m × 4m, a 3.0m² mat measures 0.5m × 6m, and so on. The mesh can be cut (never the cable) to turn corners and fit around obstacles. For irregular room shapes, the Amber 10W/m Loose-Lay Cable may be a better option. Email your room dimensions to customerservice@bubblegumbathrooms.co.uk or call 01603 381095 for a free sizing recommendation. Complete Your Underfloor Heating Installation Amber Underfloor Heating Thermostats — DT1 digital or DT-two+ WiFi with Alexa & Google Home; required to control this mat Amber 100W Heat Mat For Timber Floors — lower output mat designed for timber subfloors Amber 10W/m Electric Underfloor Heating Cable — flexible loose cable for irregular or awkward floor shapes Amber Decoupling Membrane — crack isolation, waterproofing & cable carrier for cable installations Amber / Devi Underfloor Heating Cable Repair Kit — for repairing damaged heating cables Frequently Asked Questions Why 150W/m² for concrete floors? Concrete has a high thermal mass — it absorbs and stores heat, which means it takes longer to warm up and requires more energy to reach a comfortable temperature than a timber subfloor. A 150W/m² output compensates for this by delivering more heat per square metre, ensuring the floor reaches temperature efficiently. For timber subfloors, the Amber 100W Heat Mat is the correct choice — timber floors have a lower thermal mass and a lower maximum temperature tolerance, so a lower output is recommended. What size mat do I need? Measure the usable floor area — the area where people walk, excluding fixed furniture. For a standard bathroom, this is typically 2–4m² depending on the room size and layout. The mat is 500mm wide, so select the size whose total area matches your usable floor area. The mesh can be cut (never the cable) to turn corners and navigate around obstacles. If your room is an irregular shape, the Amber 10W/m Loose-Lay Cable offers more flexibility. Call us on 01603 381095 if you need help sizing. Can the mat be cut to fit? The mesh can be cut to allow the mat to turn corners, change direction, or navigate around obstacles such as toilet bases and vanity units. The cable must never be cut — cutting the cable will damage the heating element and void the warranty. The mat is designed to be folded back on itself at the mesh cuts to cover the required area. What floor coverings can be used over this mat? The 150W/m² output is designed for use under ceramic and porcelain tiles and natural stone. These materials have high thermal conductivity and can withstand the heat output of a 150W mat. Carpet, vinyl, laminate, and timber floor coverings have lower maximum temperature tolerances and are better suited to the 100W mat or the 10W/m cable at wider spacing. Always check the floor covering manufacturer’s guidance on maximum floor temperature. Do I need a thermostat? Yes — a thermostat is required to control the heating mat and prevent overheating. We offer the Amber DT1 Digital Thermostat (£63) for straightforward programmable control, and the Amber DT-two+ Smart Thermostat (£114–£115) for Wi-Fi control via app, Alexa, and Google Home. Both include a floor sensor probe and carry a 2-year warranty. Can I order if the item shows as out of stock? Yes — this product is available to order even when stock shows as zero. Please allow additional lead time and contact us on 01603 381095 to confirm availability.

Read more less

Amber 10W/m Electric Underfloor Heating Cable — 10m to 165m — 20-Year SecureFloor Warranty The Amber 10W/m Electric Underfloor Heating Cable is the flexible solution for underfloor heating installations where a fixed-size mat won’t work — irregular room shapes, areas with obstacles, or spaces requiring a custom cable layout. At 10W per metre, the cable output and coverage area are determined by the spacing you choose between runs, giving you complete control over heat output and floor coverage. Compatible with tile, stone, carpet, vinyl, and timber floor coverings. Use with the Amber Decoupling Membrane for crack isolation, waterproofing, and secure cable positioning. Backed by the 20-year SecureFloor Warranty. ⚠️ Electrical connections must be made by a qualified electrician. All wiring to the mains supply must be carried out by a Part P registered electrician in accordance with BS 7671. Not sure which cable length you need? Email your room dimensions and floor type to customerservice@bubblegumbathrooms.co.uk or call 01603 381095. Available Lengths & Prices 10m — 100W · £98 (SKU: A500010) 20m — 200W · £109 (SKU: A500020) 28m — 280W · £129 (SKU: A500028) 41m — 410W · £159 (SKU: A500041) 50m — 500W · £195 (SKU: A500050) 57m — 570W · £229 (SKU: A500057) 70m — 700W · £235 (SKU: A500070) 81m — 800W · £249 (SKU: A500081) 90m — 900W · £279 (SKU: A500090) 100m — 1000W · £289 (SKU: A500100) 129m — 1290W · £329 (SKU: A500129) 140m — 1490W · £335 (SKU: A500140) 165m — 1650W · £375 (SKU: A500165) Key Features 10W per metre output — adjust spacing to achieve your target W/m² output Flexible loose-lay format — route freely to suit any floor shape, obstacle, or layout Compatible with all common floor coverings — tile, stone, carpet, vinyl, and timber Round twin conductor — with 360° screening and single cold tail 4mm cable diameter — slim profile; minimal floor height build-up PVC outer sheath 230V operation — 220–240V~ 20-year SecureFloor Warranty — market-leading coverage Suitable for primary or secondary heating — depending on cable spacing and room insulation Technical Specification Brand: Amber Output: 10W/m @ 230V~ Operational voltage: 220–240V~ Construction: Round, twin conductor with 360° screening, one cold tail Cable diameter: 4mm Outer sheath: PVC Warranty: 20-year SecureFloor Warranty Compatible floor coverings: Tile, stone, carpet, vinyl, timber Recommended substrate: Amber Decoupling Membrane Coverage Guide — Approximate Floor Area by Cable Length & Spacing The area covered depends on the spacing between cable runs. Closer spacing = higher W/m² output (primary heating); wider spacing = lower W/m² (secondary/comfort heating). As a guide at 100mm spacing (100W/m² — primary heating): 10m — approx. 1m² 20m — approx. 2m² 28m — approx. 2.8m² 41m — approx. 4m² 50m — approx. 5m² 57m — approx. 5.7m² 70m — approx. 7m² 81m — approx. 8m² 90m — approx. 9m² 100m — approx. 10m² 129m — approx. 12.9m² 140m — approx. 14m² 165m — approx. 16.5m² For secondary/comfort heating under carpet or timber, wider spacing (150mm+) is typically used. Email your room dimensions to customerservice@bubblegumbathrooms.co.uk or call 01603 381095 for a free sizing recommendation. Complete Your Underfloor Heating Installation Amber Decoupling Membrane — purpose-designed substrate for this cable; crack isolation, waterproofing & cable carrier in one Amber Underfloor Heating Thermostats — DT1 digital or DT-two+ WiFi with Alexa & Google Home Amber / Devi Underfloor Heating Cable Repair Kit — essential for repairing damaged cables Amber 150W Heat Mat For Concrete Floors — pre-spaced mat alternative for regular-shaped rooms on concrete Amber 100W Heat Mat For Timber Floors — pre-spaced mat alternative for timber subfloors Frequently Asked Questions How do I choose the right cable length? First measure your usable floor area — the area where people walk, excluding fixed furniture such as kitchen units, bath panels, and toilet bases. Then decide on your target heat output: for primary heating (the main heat source for the room), aim for 100–150W/m², which means 100mm–150mm cable spacing at 10W/m. For secondary/comfort heating, 60–80W/m² is typical. Multiply your usable area by the target W/m² to get the total wattage needed, then select the cable length that matches. If in doubt, email your room dimensions to customerservice@bubblegumbathrooms.co.uk or call 01603 381095 for a free recommendation. What is the difference between this cable and a heating mat? A heating mat has the cable pre-fixed to a mesh at a set spacing — it is simply rolled out, making it quick to install in regular rectangular rooms. This loose-lay cable is routed freely across the floor, allowing you to adjust the spacing and layout to suit any shape, work around obstacles, or concentrate heat in specific areas. The cable takes more time to install but offers complete flexibility. It is the correct choice for L-shaped rooms, rooms with alcoves, or any area where a fixed-size mat would not fit neatly. Why use the Amber Decoupling Membrane with this cable? The Amber Decoupling Membrane provides three functions in one product: it holds the cable securely in position during installation (no additional fixings needed), provides crack isolation to prevent tile fractures caused by subfloor movement, and adds a layer of waterproofing. It is the purpose-designed substrate for this cable and is strongly recommended for tile and stone floor installations. Can this cable be used under carpet or timber? Yes — the Amber 10W/m cable is compatible with carpet, vinyl, and timber floor coverings as well as tile and stone. For carpet and timber, wider cable spacing is typically used to achieve a lower W/m² output suitable for secondary/comfort heating. Always check the floor covering manufacturer’s guidance on maximum floor temperature for underfloor heating compatibility. What warranty does this cable carry? The Amber 10W/m heating cable is backed by the 20-year SecureFloor Warranty, covering manufacturing defects in the cable when installed in accordance with the installation instructions by a qualified electrician. This is one of the longest warranties available on electric underfloor heating cables in the UK. Can I order if the item shows as out of stock? Yes — this product is available to order even when stock shows as zero. Please allow additional lead time and contact us on 01603 381095 to confirm availability.

Read more less

Amber 3m Replacement Floor Sensor — Compatible with All Amber & DEVI Thermostats The Amber 3m Replacement Floor Sensor is the correct spare part for restoring accurate floor temperature monitoring to any Amber or DEVI underfloor heating thermostat. If your thermostat is displaying incorrect temperature readings, fluctuating readings, or an error code indicating a sensor fault, replacing the floor sensor probe is usually all that is needed to return the system to full performance — without replacing the thermostat itself. The 3m cable length suits most standard bathroom and room installations. ⚠️ Sensor replacement should be carried out by a qualified electrician. The floor sensor connects to the thermostat wiring. Any work on the thermostat wiring must be carried out by a Part P registered electrician in accordance with BS 7671. Key Features 3m cable length — suits most standard installations; sensor probe reaches from the thermostat position to beneath the floor covering Compatible with all Amber thermostats — including DT1 and DT-two+ models Compatible with all DEVI thermostats — direct replacement for DEVI floor sensor probes Restores accurate temperature monitoring — resolves incorrect readings, fluctuating temperatures, and sensor error codes Direct replacement — no modification required; plug-and-play with compatible thermostats Technical Specification Brand: Amber SKU: A500101 Type: Replacement floor sensor probe Cable length: 3.0m Compatible with: All Amber underfloor heating thermostats (DT1, DT-two+) and all DEVI thermostats What’s Included Amber 3m floor sensor probe You May Also Need Amber Underfloor Heating Thermostats — DT1 digital or DT-two+ WiFi; full thermostat replacement if your unit is beyond repair Amber / Devi Underfloor Heating Cable Repair Kit — fix breaks in your heating cable quickly and safely Amber 150W Heat Mat For Concrete Floors — replacement heating mat for solid/concrete subfloors Amber 100W Heat Mat For Timber Floors — replacement heating mat for timber subfloors Amber 10W/m Electric Underfloor Heating Cable — replacement heating cable for bespoke layouts Frequently Asked Questions How do I know if my floor sensor has failed? Common signs of a failed or faulty floor sensor include: the thermostat displaying an error code (often ‘E0’, ‘E1’, or similar depending on the model), the floor temperature reading appearing significantly higher or lower than expected, the heating not switching on or off at the correct temperature, or the thermostat displaying a fixed or unchanging temperature reading. If you are seeing any of these symptoms, replacing the floor sensor is the first step before considering a full thermostat replacement. Call us on 01603 381095 if you are unsure. Is this sensor compatible with my thermostat? This sensor is compatible with all Amber thermostats (including the DT1 and DT-two+ models) and all DEVI thermostats. If you have a different brand of thermostat, call us on 01603 381095 to confirm compatibility before ordering. Is 3m long enough for my installation? The 3m cable runs from the thermostat position (typically on the wall) to the sensor probe tip beneath the floor covering. In most standard bathroom and room installations, 3m is sufficient. The sensor probe should be positioned approximately 300–500mm from the wall, between two cable runs of the heating mat or cable, and not directly over a cable. If your thermostat is positioned further from the heated area, call us on 01603 381095 to discuss options. Can I replace the floor sensor without lifting the floor? In most installations, the floor sensor probe is installed in a conduit tube beneath the floor covering, which allows the probe to be withdrawn and replaced without lifting tiles or the floor covering. If the sensor was not installed in a conduit, the floor covering will need to be lifted to replace it. Check your original installation records or consult your installer before ordering. Do I need an electrician to replace the floor sensor? The sensor probe itself connects to the thermostat at the wall — any work on the thermostat wiring must be carried out by a qualified, Part P registered electrician in accordance with BS 7671 and Part P of the Building Regulations. The probe replacement in the floor conduit may be carried out by a competent person, but the thermostat connection requires a qualified electrician. Can I order if the item shows as out of stock? Yes — this product is available to order even when stock shows as zero. Please allow additional lead time and contact us on 01603 381095 to confirm availability.

Read more less

Amber Decoupling Membrane for Underfloor Cable Heating — 5m² & 15m² — Crack Isolation & Waterproofing The Amber Decoupling Membrane is the purpose-designed substrate for electric underfloor heating cable systems. In a single product it provides three critical functions: crack isolation (decoupling) to prevent tile fractures caused by subfloor movement, waterproofing to protect the subfloor and heating system from moisture, and a secure cable carrier that holds the heating cable in position during installation. Made from polypropylene with a thermo-welded fabric underside. Compatible with Amber and DEVI electric underfloor heating cables. Available in 5m² and 15m². ✅ Not sure how much membrane you need? Email your room dimensions to customerservice@bubblegumbathrooms.co.uk or call 01603 381095 and we’ll advise the right size for your project. Available Sizes & Prices 5m² (1m × 5m) — £73 (SKU: A600005) 15m² (1m × 15m) — £219 (SKU: A600015) Key Features Crack isolation (decoupling) — prevents stress fractures in floor tiles caused by subfloor movement and settlement Waterproofing — protects the subfloor and heating cable from moisture ingress Heated cable carrier — securely holds electric underfloor heating cables in position during installation; no additional fixings required Polypropylene construction — with thermo-welded fabric underside for adhesion to the subfloor 1m wide roll — easy to handle and cut to size Compatible with Amber and DEVI cables — and most electric underfloor heating cable systems Two sizes — 5m² for smaller rooms; 15m² for larger areas or multiple rooms Technical Specification Brand: Amber Type: Decoupling membrane for electric underfloor heating cable systems Material: Polypropylene with thermo-welded fabric underside Width: 1m SKU (5m²): A600005 — 1m × 5m SKU (15m²): A600015 — 1m × 15m Functions: Crack isolation, waterproofing, cable carrier Compatible with: Amber and DEVI electric underfloor heating cables What’s Included Amber decoupling membrane roll (size as selected) Installation instructions Complete Your Underfloor Heating Installation Amber 10W/m Electric Underfloor Heating Cable — the ideal cable to use with this membrane; flexible layout for any floor shape Amber Underfloor Heating Thermostats — DT1 digital or DT-two+ WiFi with Alexa & Google Home Amber / Devi Underfloor Heating Cable Repair Kit — essential for repairing damaged heating cables Amber 150W Heat Mat For Concrete Floors — pre-spaced mat alternative for regular-shaped rooms Amber 100W Heat Mat For Timber Floors — lower output mat for timber subfloors Frequently Asked Questions What is a decoupling membrane and why do I need one? A decoupling membrane is a layer installed between the subfloor and the tile adhesive that ‘decouples’ the two surfaces — allowing them to move independently. Without decoupling, stress caused by subfloor movement (particularly in timber floors or new builds where settlement is expected) transfers directly into the tile adhesive and tiles, causing cracks. The Amber membrane prevents this by absorbing movement at the membrane layer rather than at the tile surface. For underfloor heating installations, it also provides waterproofing and acts as a cable carrier, making it a three-in-one solution. How much membrane do I need? Measure the usable floor area where the heating cable will be installed — excluding fixed furniture such as vanity units, bath panels, and toilet bases. The 5m² roll (1m × 5m) suits smaller bathrooms and en-suites; the 15m² roll (1m × 15m) suits larger rooms or multiple areas. Add 10% for cuts and overlaps. If you are unsure, email your room dimensions to customerservice@bubblegumbathrooms.co.uk or call 01603 381095. Is this membrane compatible with all underfloor heating cables? The Amber decoupling membrane is specifically designed for use with Amber and DEVI electric underfloor heating cables, including the Amber 10W/m Heating Cable. It is compatible with most electric (resistive) underfloor heating cable systems. It is not designed for use with heating mats (which have their own mesh carrier) or wet (hydronic) underfloor heating systems. Can this membrane be used on timber subfloors? Yes — the Amber decoupling membrane is suitable for use on timber subfloors. The decoupling function is particularly valuable on timber floors, where natural movement and flex can cause tile cracking without a decoupling layer. Ensure the timber subfloor is structurally sound, level, and adequately stiff before installation. Follow the installation instructions supplied with the membrane for fixing method and adhesive requirements. Does this membrane replace the need for a separate waterproofing layer? The Amber decoupling membrane provides a degree of waterproofing as part of its multi-function design. For full wet room tanking — where complete waterproofing of the floor and walls is required — a dedicated tanking system may also be needed. If you are installing in a wet room or shower area, call us on 01603 381095 to confirm the correct waterproofing specification for your installation. Can I order if the item shows as out of stock? Yes — this product is available to order even when stock shows as zero. Please allow additional lead time and contact us on 01603 381095 to confirm availability.

Read more less

Amber Underfloor Heating Thermostats — DT1 Digital & DT-two+ WiFi — Alexa & Google Home Take complete control of your electric underfloor heating with an Amber thermostat. Choose from the straightforward DT1 Digital Thermostat for reliable 7-day programmable control, or the DT-two+ Smart Thermostat for full Wi-Fi connectivity, smartphone app control, and voice commands via Alexa or Google Home. Both fit a standard UK 86 × 86mm back box, include a floor sensor probe, and are backed by a 2-year manufacturer’s warranty. Available in Black or White (DT-two+ only). ⚠️ Electrical installation must be carried out by a qualified electrician. Thermostat wiring must be completed by a Part P registered electrician in accordance with BS 7671 (IET Wiring Regulations). Not suitable for wet (hydronic) underfloor heating systems. Available Models & Prices Amber DT1 Digital Thermostat — £63 (SKU: DT1) — programmable touchscreen; 7-day 6-period scheduling Amber DT-two+ Black — £115 (SKU: DT2+B) — Wi-Fi smart thermostat; Alexa & Google Home; black finish Amber DT-two+ White — £114 (SKU: DT2+W) — Wi-Fi smart thermostat; Alexa & Google Home; white finish Amber DT1 — Digital Programmable Thermostat A fully programmable touchscreen thermostat with a large white LED backlit display. Simple and reliable — the ideal choice for straightforward programmable control without smart home integration. 7-day, 6-period programming — set a unique heating schedule for every day of the week Manual or period control mode — override the programme when needed Frost protection mode — maintains a minimum temperature automatically Energy saving sensor setup — reduces heating costs intelligently Built-in air sensor — monitors ambient room temperature Floor sensor included Amber DT-two+ — WiFi Smart Thermostat (Black & White) Everything the DT1 offers, plus Wi-Fi connectivity and full smart home integration. Control your heating from anywhere in the world via the smartphone app, or use voice commands through Alexa or Google Home. Wi-Fi enabled — control remotely via smartphone app (iOS & Android) Alexa compatible — full voice control via Amazon Alexa Google Home compatible — full voice control via Google Assistant Smart home integration — works within your existing smart home ecosystem Available in Black or White — choose to suit your bathroom or room décor All DT1 features included — 7-day programming, frost protection, floor sensor Technical Specification Brand: Amber Back box: Standard UK 86 × 86mm Floor sensor: Included with all models Programming: 7-day, 6-period Warranty: 2 years (manufacturer) Compatible with: Electric (resistive) underfloor heating systems only SKU (DT1): DT1 SKU (DT-two+ Black): DT2+B SKU (DT-two+ White): DT2+W What’s Included Amber thermostat (model as selected) Floor sensor probe Installation manual 2-year warranty documentation Compatible Amber Underfloor Heating Products Amber 150W Heat Mat For Concrete Floors — primary heating for solid/concrete subfloors; multiple sizes available Amber 100W Heat Mat For Timber Floors — lower output mat designed for timber subfloors; multiple sizes available Amber 10W/m Electric Underfloor Heating Cable — flexible loose cable for bespoke or irregular floor layouts Amber / Devi Underfloor Heating Cable Repair Kit — for repairing damaged heating cables Frequently Asked Questions What is the difference between the DT1 and the DT-two+? Both thermostats offer 7-day, 6-period programmable control, frost protection, and include a floor sensor. The key difference is connectivity. The DT1 (£63) is a standalone digital thermostat — controlled directly on the unit. The DT-two+ (£114–£115) adds Wi-Fi connectivity, allowing you to control your heating remotely via a smartphone app and use voice commands through Alexa or Google Home. If you want smart home integration or remote control, choose the DT-two+. If you want reliable programmable control without the smart features, the DT1 is the better value choice. Which Amber thermostat is compatible with my heating mat? Both the DT1 and DT-two+ are compatible with the full range of Amber electric underfloor heating mats and cables, including the 150W Concrete Floor Mat and the 100W Timber Floor Mat. Check the switching capacity of the thermostat against the total wattage of your mat before ordering — call us on 01603 381095 if you need help confirming compatibility. Does the thermostat fit a standard UK back box? Yes — all Amber thermostats fit a standard UK 86 × 86mm single-gang back box. They are designed as a direct replacement for most existing thermostats and wall switches, making installation straightforward for a qualified electrician. Is the floor sensor included? Yes — a floor sensor probe is included with all Amber thermostat models. The floor sensor is installed beneath the floor covering during the heating mat installation and monitors the floor surface temperature directly, allowing the thermostat to switch the heating on and off to maintain the set floor temperature. Can I control the DT-two+ with Alexa or Google Home? Yes — the DT-two+ is fully compatible with Amazon Alexa and Google Home, allowing you to control your underfloor heating using voice commands. It also connects via Wi-Fi to a smartphone app (iOS and Android) for remote control from anywhere. Is this thermostat suitable for wet (hydronic) underfloor heating? No — Amber thermostats are designed for electric (resistive) underfloor heating systems only. They are not suitable for wet (water-based/hydronic) underfloor heating systems. What guarantee does this thermostat carry? All Amber thermostats carry a 2-year manufacturer’s warranty against manufacturing defects when installed in accordance with the installation instructions by a qualified electrician. Can I order if the item shows as out of stock? Yes — this product is available to order even when stock shows as zero. Please allow additional lead time and contact us on 01603 381095 to confirm availability.

Read more less

Aqua Elegance 150W Electric Underfloor Heating Mat — 1–10m² | ETFE | 50-Year Guarantee The Aqua Elegance 150W Electric Underfloor Heating Mat provides efficient radiant underfloor heating suitable for bathrooms, en-suites, kitchens, and living areas. The premium ETFE (Fluoropolymer) cable insulation — with no PVC outer sheathing — delivers superior durability and heat resistance compared to standard PVC-insulated mats. The multi-strand wire composite construction makes the cable extremely flexible and resistant to damage during installation. When used with tile backer boards, warm-up times and running costs can be reduced by up to 25%. Backed by a 50-year lifetime guarantee. Available in five sizes from 1m² to 10m². ⚠️ Electrical connections must be made by a qualified electrician. The mat can be laid by a competent DIYer, but all electrical connections to the mains supply must be carried out by a Part P registered electrician in accordance with BS 7671 (IET Wiring Regulations). Available Sizes & Prices 1m² — £85 (SKU: BGBP108836 · EAN: 5054913527517) 2m² — £109 (SKU: BGBP108837 · EAN: 5054913527524) 3m² — £135 (SKU: BGBP108838 · EAN: 5054913527531) 7m² — £229 (SKU: BGBP108839 · EAN: 5054913527548) 10m² — £299 (SKU: BGBP108840 · EAN: 5054913527555) Key Features 150W/m² output — efficient radiant heating; warms the floor surface and the room above ETFE Fluoropolymer cable insulation — premium material; no PVC; superior heat and chemical resistance Multi-strand wire composite — extremely flexible and durable; resistant to damage during installation Up to 25% cost saving — when used with tile backer boards; reduces warm-up time and running costs Compatible with most floor coverings — tiles, stone, laminate, engineered wood, and LVT 5 sizes available — 1, 2, 3, 7, and 10m² to suit any room 50-year lifetime guarantee — Aqua Elegance comprehensive warranty Technical Specification Brand: Aqua Elegance Type: Electric underfloor heating mat Wattage: 150W per m² Cable insulation: ETFE (Ethylene Tetrafluoroethylene) Fluoropolymer — no PVC Construction: Multi-strand wire composite Compatible floor coverings: Tiles, stone, laminate, engineered wood, LVT, and most other floor coverings Recommended use with: Tile backer boards (reduces running costs by up to 25%) Electrical connections: Qualified electrician required (Part P) Guarantee: 50 years (lifetime) HS Code: 8516800000 SKU (1m²): BGBP108836 · EAN: 5054913527517 SKU (2m²): BGBP108837 · EAN: 5054913527524 SKU (3m²): BGBP108838 · EAN: 5054913527531 SKU (7m²): BGBP108839 · EAN: 5054913527548 SKU (10m²): BGBP108840 · EAN: 5054913527555 What's Included Aqua Elegance 150W electric underfloor heating mat (size as selected) Installation instructions Guarantee documentation You'll Also Need Digital Programmable Thermostat — required to control the heating mat and prevent overheating Touchscreen Thermostat — premium touchscreen option for controlling your underfloor heating Smart WiFi Thermostat — app-controlled smart option for remote management of your underfloor heating 6mm Tile Backer Insulation Board (Pack of 5) — recommended underlay; reduces warm-up time and running costs by up to 25% Complete the Aqua Elegance Underfloor Heating Range 150W Electric Underfloor Loose-Lay Heating Cable — flexible loose cable option for irregular or awkward floor areas Digital Programmable Thermostat — programmable control with floor sensor Touchscreen Thermostat — Chrome Surround — premium touchscreen interface Smart WiFi Thermostat — app-controlled smart thermostat 6mm Tile Backer Insulation Board (Pack of 5) — insulation underlay for improved efficiency Suitable For Bathrooms and en-suites Kitchens and utility rooms Living rooms and hallways Any room requiring efficient radiant underfloor heating Frequently Asked Questions What size mat do I need? Select a mat that covers the usable floor area — the area where people walk, excluding fixed furniture such as vanity units, bath panels, and toilet bases. As a guide: a standard bathroom of 2–3m² usable floor area suits the 2m² or 3m² mat; a larger open-plan bathroom or kitchen suits the 7m² or 10m² mat. The mat should never be cut or overlapped — if the mat is slightly larger than the usable area, it can be turned or shaped within the space. Call us on 01603 381095 if you need help sizing. What is the difference between a heating mat and a loose-lay heating cable? A heating mat (this product) has the cable pre-fixed to a mesh at a set spacing — it is simply rolled out across the floor area, making it quick and straightforward to install in regular-shaped rooms. A loose-lay heating cable is a single cable that you route yourself across the floor, allowing you to adjust the spacing and layout to suit irregular or awkward floor shapes, around obstacles, or in rooms where a mat would not fit neatly. The loose cable takes more time to install but offers greater flexibility. What is ETFE insulation and why is it better than PVC? ETFE (Ethylene Tetrafluoroethylene) is a high-performance Fluoropolymer used as the cable insulation on this mat. Compared to standard PVC insulation, ETFE offers significantly higher heat resistance, better chemical resistance, and greater long-term durability. It does not degrade or become brittle over time in the way PVC can, making it the preferred choice for premium underfloor heating systems. The absence of PVC also makes it a more environmentally responsible choice. Can I install the mat myself? The mat itself can be laid by a competent DIYer — it is rolled out and fixed to the subfloor before the floor covering is applied. However, all electrical connections to the mains supply must be made by a qualified, Part P registered electrician. This is a legal requirement under Part P of the Building Regulations for electrical work in bathrooms and kitchens. A thermostat is also required — see our Digital Programmable Thermostat, Touchscreen Thermostat, or Smart WiFi Thermostat. What floor coverings is this mat compatible with? This mat is compatible with most floor coverings including ceramic and porcelain tiles, natural stone, laminate, engineered wood, and LVT (luxury vinyl tile). It is not suitable for use under solid hardwood flooring. Always check the floor covering manufacturer's guidance on underfloor heating compatibility before installation. How much does it cost to run? Running costs depend on your electricity tariff, the size of the mat, and how long it runs each day. As a guide, a 150W/m² mat running for 4 hours per day costs approximately 4–8p per m² per day at typical UK electricity rates. Using tile backer boards beneath the floor covering can reduce warm-up time and running costs by up to 25% by improving thermal efficiency. Do I need a thermostat? Yes — a thermostat is required to control the heating mat and prevent overheating. We offer three compatible options: the Digital Programmable Thermostat for straightforward programmable control, the Touchscreen Thermostat for a premium touchscreen interface, and the Smart WiFi Thermostat for app-controlled remote management. All include a floor sensor probe. Call us on 01603 381095 if you need advice. What guarantee does this mat come with? The Aqua Elegance 150W underfloor heating mat carries a 50-year lifetime guarantee, covering manufacturing defects in the mat and cable. The guarantee is valid when the mat is installed in accordance with the installation instructions by a qualified electrician. Can I order if the item shows as out of stock? Yes — this product is available to order even when stock shows as zero. Please allow additional lead time and contact us on 01603 381095 to confirm availability.

Read more less

Aqua Elegance 150W Electric Underfloor Loose-Lay Heating Cable — 20m, 30m & 40m — ETFE — 50-Year Guarantee The Aqua Elegance 150W Loose-Lay Heating Cable provides flexible, efficient radiant underfloor heating for bathrooms, en-suites, and any room with an irregular or awkward floor shape. Unlike a heating mat — where the cable is pre-fixed to a mesh at a set spacing — the loose-lay cable is routed freely across the floor, allowing you to adjust the spacing and layout to suit any shape, work around obstacles, or concentrate heat in specific areas. The premium ETFE Fluoropolymer cable insulation (no PVC) delivers superior durability and heat resistance. When used with tile backer boards, running costs can be reduced by up to 25%. Backed by a 50-year lifetime guarantee. Available in 20m, 30m, and 40m lengths. ⚠️ Electrical connections must be made by a qualified electrician. The cable can be laid by a competent DIYer, but all electrical connections to the mains supply must be carried out by a Part P registered electrician in accordance with BS 7671 (IET Wiring Regulations). Available Lengths & Prices 20m — £109 (SKU: BGBP108842 · EAN: 5054913527562) 30m — £119 (SKU: BGBP108843 · EAN: 5054913527579) 40m — £129 (SKU: BGBP108844 · EAN: 5054913527586) Key Features Loose-lay cable format — route freely to suit any floor shape, obstacle, or layout 150W/m² output — efficient radiant heating at standard cable spacing ETFE Fluoropolymer cable insulation — premium material; no PVC; superior heat and chemical resistance Multi-strand wire composite — extremely flexible and durable; resistant to damage during installation Up to 25% cost saving — when used with tile backer boards Compatible with most floor coverings — tiles, stone, laminate, engineered wood, and LVT 3 lengths available — 20m, 30m, and 40m 50-year lifetime guarantee Technical Specification Brand: Aqua Elegance Type: Loose-lay electric underfloor heating cable Wattage: 150W per m² (at standard spacing) Cable insulation: ETFE (Ethylene Tetrafluoroethylene) Fluoropolymer — no PVC Construction: Multi-strand wire composite Compatible floor coverings: Tiles, stone, laminate, engineered wood, LVT, and most other floor coverings Recommended use with: Tile backer boards (reduces running costs by up to 25%) Electrical connections: Qualified electrician required (Part P / BS 7671) Country of Origin: CN HS Code: 8516.80 Guarantee: 50 years (lifetime) SKU (20m): BGBP108842 · EAN: 5054913527562 SKU (30m): BGBP108843 · EAN: 5054913527579 SKU (40m): BGBP108844 · EAN: 5054913527586 What's Included Aqua Elegance 150W loose-lay heating cable (length as selected) Installation instructions Guarantee documentation Complete Your Underfloor Heating Installation Aqua Elegance 150W Electric Underfloor Heating Mat — pre-spaced mesh mat; quicker to install in regular-shaped rooms 6mm Tile Backer Insulation Board (Pack of 5) — reduces UFH running costs by up to 25% Digital Programmable Thermostat — required to control your underfloor heating system Touchscreen Thermostat — premium touchscreen control with chrome surround Smart WiFi Thermostat — app-controlled smart thermostat for remote management Frequently Asked Questions What is the difference between a loose-lay cable and a heating mat? A heating mat has the cable pre-fixed to a mesh at a set spacing — it is simply rolled out across the floor, making it quick and straightforward to install in regular rectangular rooms. A loose-lay cable (this product) is a single cable that you route yourself, allowing you to adjust the spacing and layout freely. This makes it the better choice for L-shaped rooms, rooms with alcoves or obstacles, or any area where a mat would not fit neatly. The loose cable takes more time to install but offers complete flexibility over the layout. What length cable do I need? The cable length required depends on your floor area and the spacing you use between cable runs. At a standard spacing of 100mm, as a guide: 20m covers approximately 2m², 30m covers approximately 3m², and 40m covers approximately 4m². Measure your usable floor area (excluding fixed furniture) and calculate the required cable length based on your intended spacing. If you are unsure, call us on 01603 381095 and we can advise on the correct length for your installation. What is ETFE insulation and why is it better than PVC? ETFE (Ethylene Tetrafluoroethylene) is a high-performance Fluoropolymer used as the cable insulation. Compared to standard PVC insulation, ETFE offers significantly higher heat resistance, better chemical resistance, and greater long-term durability. It does not degrade or become brittle over time in the way PVC can, making it the preferred choice for premium underfloor heating systems. The absence of PVC also makes it a more environmentally responsible choice. Can I install the cable myself? The cable itself can be laid by a competent DIYer — it is routed across the subfloor and fixed in place before the floor covering is applied. However, all electrical connections to the mains supply must be made by a qualified, Part P registered electrician. A thermostat is also required — see our Digital Programmable Thermostat, Touchscreen Thermostat, or Smart WiFi Thermostat. What floor coverings is this cable compatible with? This cable is compatible with most floor coverings including ceramic and porcelain tiles, natural stone, laminate, engineered wood, and LVT (luxury vinyl tile). It is not suitable for use under solid hardwood flooring. Always check the floor covering manufacturer's guidance on underfloor heating compatibility before installation. Do I need a thermostat? Yes — a thermostat is required to control the heating cable and prevent overheating. We offer three compatible options: the Digital Programmable Thermostat for straightforward programmable control, the Touchscreen Thermostat for a premium touchscreen interface with chrome surround and advanced features, and the Smart WiFi Thermostat for app-based remote control. What guarantee does this cable come with? The Aqua Elegance 150W loose-lay heating cable carries a 50-year lifetime guarantee, covering manufacturing defects in the cable. The guarantee is valid when the cable is installed in accordance with the installation instructions by a qualified electrician. Can I order if the item shows as out of stock? Yes — this product is available to order even when stock shows as zero. Please allow additional lead time and contact us on 01603 381095 to confirm availability.

Read more less

Aqua Elegance Touchscreen Thermostat — Chrome Surround — Electric Underfloor Heating — 3600W — 50-Year Guarantee The Aqua Elegance Touchscreen Thermostat combines a premium touchscreen interface with a sleek chrome surround for a contemporary finish in modern bathrooms. With a 3600W / 16A switching capacity, it is compatible with the full range of Aqua Elegance 150W heating mats and cables. Advanced features include window open detection, holiday mode, and frost protection — providing intelligent energy management beyond basic programmable control. The included 3m floor sensor probe monitors floor temperature directly. Programmable on a 5/2-day or 7-day schedule. Backed by a 50-year lifetime guarantee. ⚠️ Electrical installation must be carried out by a qualified electrician. Thermostat wiring must be completed by a Part P registered electrician in accordance with BS 7671 (IET Wiring Regulations). Not suitable for use with wet (hydronic) underfloor heating systems. Key Features Touchscreen interface — ultra-sleek, minimal design; intuitive touch control Chrome surround — premium contemporary styling; coordinates with chrome bathroom fittings 3600W / 16A switching capacity — compatible with Aqua Elegance 150W heating mats up to 24m² 7-day or 5/2-day programming — set different schedules for weekdays and weekends Window open detection — automatically reduces heating when a window is opened; saves energy Holiday setting — extended absence mode; maintains frost protection while you’re away Frost protection — prevents the floor from dropping below a set minimum temperature Air or floor temperature control — monitor ambient room temperature or floor surface temperature 3m floor sensor probe included — monitors floor temperature directly beneath the floor covering 50-year lifetime guarantee Technical Specification Brand: Aqua Elegance SKU: BGBP108847 EAN: 5054913527616 Type: Touchscreen thermostat for electric underfloor heating Dimensions: 94mm × 136mm × 15mm Switching capacity: 3600W / 16A Supply voltage: 230V AC Sensor probe: 3m floor sensor (included) Temperature control: Air (ambient) or floor temperature Programming: 5/2-day or 7-day schedules Special functions: Window open detection, holiday setting, frost protection Finish: Chrome surround Compatible with: Electric (resistive) underfloor heating systems only Guarantee: 50 years (lifetime) What’s Included Aqua Elegance touchscreen thermostat with chrome surround 3m floor sensor probe Installation instructions Guarantee documentation Compatible Underfloor Heating Products Aqua Elegance 150W Electric Underfloor Heating Mat — 1, 2, 3, 7 & 10m² Aqua Elegance 150W Loose-Lay Heating Cable — flexible cable for irregular floor areas 6mm Tile Backer Insulation Board (Pack of 5) — reduces UFH running costs by up to 25% Digital Programmable Thermostat — budget-friendly alternative with push-button controls Frequently Asked Questions What size underfloor heating mat can this thermostat control? This thermostat has a switching capacity of 3600W / 16A. At 150W per m², it can control a heating mat or cable of up to 24m² (3600W ÷ 150W = 24). It is compatible with all Aqua Elegance mat sizes — 1, 2, 3, 7, and 10m². If combining multiple mats on a single circuit, ensure the total wattage does not exceed 3600W. What is window open detection? Window open detection is an energy-saving feature that monitors the rate of temperature drop in the room. If the temperature falls rapidly — as it would when a window or door is opened — the thermostat automatically suspends heating for a set period to avoid wasting energy heating a room with an open window. Once the temperature stabilises, normal heating resumes. This is particularly useful in bathrooms where windows are opened for ventilation after showering. What is the holiday setting? The holiday setting allows you to programme an extended absence period — for example, 14 days while you are on holiday. During this time, the thermostat suspends the normal heating schedule but maintains frost protection, ensuring the floor does not drop below a set minimum temperature. When the holiday period ends, the thermostat automatically returns to the normal programme. What is frost protection? Frost protection is a safety feature that prevents the floor temperature from dropping below a set minimum — typically around 5°C — regardless of the programmed schedule. This protects the floor covering and any pipework from damage in very cold conditions, and is particularly useful in rooms that are unheated for extended periods. What is the difference between this and the Digital Programmable Thermostat? Both thermostats are compatible with the same Aqua Elegance underfloor heating systems and carry the same 50-year guarantee. The Digital Programmable Thermostat (£92) uses a digital display with push-button controls and includes an adaptive start learning function. The Touchscreen Thermostat (this product, £135) features a premium touchscreen interface with chrome surround and adds window open detection, holiday mode, and frost protection. Choose the digital model for straightforward reliable control; choose this model for a premium finish and advanced energy-saving features. What is the difference between air and floor temperature control? In floor temperature mode, the thermostat uses the included 3m floor sensor probe to monitor the temperature of the floor surface directly. The system switches off when the floor reaches the set temperature — recommended for most installations as it protects the floor covering from overheating. In air temperature mode, the thermostat uses its internal sensor to monitor the ambient room temperature, switching the heating on and off to maintain the room at the set temperature. Is this thermostat suitable for wet (hydronic) underfloor heating? No — this thermostat is designed for electric (resistive) underfloor heating systems only. It is not suitable for wet (water-based/hydronic) underfloor heating systems. What guarantee does this thermostat carry? The Aqua Elegance touchscreen thermostat carries a 50-year lifetime guarantee against manufacturing defects when installed in accordance with the installation instructions by a qualified electrician. Can I order if the item shows as out of stock? Yes — this product is available to order even when stock shows as zero. Please allow additional lead time and contact us on 01603 381095 to confirm availability.

Read more less