A premium dimmable LED candle bulb at a clearance price. The Bell 4W LED Dimmable Candle Bulb (SKU: 05144) delivers warm, atmospheric light with smooth dimming control — perfect for chandeliers, wall lights, pendant fittings, and decorative fixtures with small bayonet cap (SBC/B15) sockets. Crystal-clear glass finish for elegant, sparkling light distribution.
Key Features
4W LED — replaces 40W incandescent; saves up to 90% on energy costs
Dimmable — smooth dimming control for perfect ambience
2700K Warm White — cosy, traditional incandescent-style warmth
Clear Glass Finish — elegant, sparkling appearance in open fittings
150° Beam Angle — wide light distribution; ideal for decorative fittings
25,000 Hour Lifespan — up to 22 years with typical use
Instant Full Brightness — no warm-up delay
SBC/B15 Cap — small bayonet cap; fits standard B15 lamp holders
Technical Specification
Brand: Bell Lighting
SKU / Part Number: 05144
Barcode (EAN): 5013588051444
Power: 4W LED (replaces 40W incandescent)
Cap Type: SBC (Small Bayonet Cap / B15)
Colour Temperature: 2700K Warm White
Voltage: 240V
Frequency: 50/60Hz
Beam Angle: 150°
Lifespan: 25,000 hours
Switching Cycles: 12,500
Energy Consumption: 4kWh per 1,000 hours
Dimmable: Yes
Finish: Clear Glass
Frequently Asked Questions
Will this fit my light fitting?This bulb uses an SBC (Small Bayonet Cap / B15) fitting — a small two-pin bayonet cap. Check your existing bulb or lamp holder to confirm it takes a B15 cap before ordering. It is not compatible with BC/B22 (large bayonet) or ES/E27 (screw) fittings.
Is this bulb dimmable?Yes — this bulb is fully dimmable. Ensure your dimmer switch is compatible with LED lamps. If you’re unsure, contact us on 01603 381095 and we’ll advise.
What does 2700K mean?2700K is a warm white colour temperature, very close to traditional incandescent bulbs. It creates a cosy, welcoming atmosphere and is ideal for living rooms, bedrooms, hallways, and decorative fittings.
What is the difference between SBC (B15) and BC (B22)?SBC (B15) is the small bayonet cap — 15mm pin spacing, commonly used in smaller decorative fittings, chandeliers, and wall lights. BC (B22) is the standard large bayonet cap — 22mm pin spacing, used in most standard UK ceiling pendants. This bulb is B15 only.
Delivery Information
This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.
Power on demand — and hidden away when you don't need it. The PowerTech Ascend is a premium motorised pop-up socket that rises smoothly from your worktop at the touch of a button, delivering a full charging hub in a sleek silver finish. When you're done, it retracts just as effortlessly, keeping your kitchen, home office, or workstation clutter-free.
With two UK mains sockets, a 30W USB-C port with Power Delivery, a USB-A port, and a built-in 15W Qi wireless charging pad in the lid, the Ascend handles everything from laptops and tablets to smartphones — all from a single 95mm cut-out.
Key Features
Motorised mechanism — rises and retracts smoothly at the touch of a button
2 × UK mains sockets — compatible with all standard UK plugs (240V)
30W USB-C with Power Delivery — fast-charges laptops, tablets, and smartphones
USB-A charging port — for everyday devices
15W Qi wireless charging lid — Qi-certified, no cable needed
Anti-trap safety mechanism — prevents accidental pinching on retraction
IP54 rated (when closed) — splash-resistant for kitchen environments
Silver finish — contemporary look that complements modern interiors
95mm cut-out — standard worktop installation size
2m cable — generous reach for under-counter wiring
2-year warranty
Technical Specification
Rated Voltage: 240V
Product Type: Motorised Pop-Up Socket
Mains Sockets: 2 × UK
USB-C Output: 30W with Power Delivery
USB-A Output: Standard charging
Wireless Charging: 15W Qi-certified (lid)
IP Rating (closed): IP54
Cut-Out Diameter: 95mm
Cable Length: 2m
Product Weight: 2.50 kg
Finish: Silver
Country of Origin: CN
Warranty: 2 years
Brand: SycamoreLED / PowerTech
Frequently Asked Questions
What cut-out size is required?
The PowerTech Ascend requires a 95mm diameter cut-out in your worktop — a standard size compatible with most worktop installation kits.
Does it need a qualified electrician to install?
Yes. As with all mains-wired electrical products, installation should be carried out by a qualified electrician in accordance with Part P of the Building Regulations.
Is the USB-C port suitable for charging laptops?
Yes — the USB-C port delivers 30W with Power Delivery, sufficient to charge most USB-C laptops, tablets, and smartphones at full speed.
Is the Qi wireless charger compatible with my phone?
The Ascend features a 15W Qi-certified wireless charging pad built into the lid, compatible with all Qi-enabled devices including iPhone and Android smartphones.
What does the IP54 rating mean?
IP54 means the unit is protected against dust ingress and splash water from any direction — suitable for kitchen worktops. Note: the IP54 rating applies when the unit is in the closed/retracted position.
Can I order if the item shows as out of stock?
Yes — you can still place your order and we will despatch as soon as stock is available. For lead time estimates, please contact us at customerservice@bubblegumbathrooms.co.uk.
I have a question not answered here — how do I get in touch?
Please email us at customerservice@bubblegumbathrooms.co.uk and we'll be happy to help.
Complete the SycamoreLED Collection
Pair the PowerTech Ascend with other premium SycamoreLED products for a fully integrated smart bathroom or kitchen:
Skylar Smart Tech Tunable LED Mirror 21.5" | Android 11 | IP65
Premium Mirror Demister Pad 265mm × 274mm
IP44 Vega LED Illuminated Shelf
MK Grid Plus K5851WHI 1-Module Digital TV Socket - White
This MK Grid Plus 1-module digital TV socket provides reliable connectivity for digital television signals within modular grid plate systems. The compact white module clips easily into MK Grid Plus mounting frames, offering flexible TV connection points for modern digital TV installations.
Key Features:
1-module digital TV socket for MK Grid Plus system
Designed for digital TV signal distribution
White finish to match Grid Plus range
Front-loading design - clips into place from front of mounting frame
Compact 1-module width (half-width)
Compatible with all MK Grid Plus frames and plates
Modular system allows custom configurations
Part of the comprehensive MK Grid Plus range
Backed by MK quality and reliability
What is MK Grid Plus?
MK Grid Plus is a modular wiring accessory system that allows you to create custom switch and socket configurations to suit your exact requirements. Individual modules (switches, sockets, TV outlets, data outlets) clip into mounting frames, which are then fitted into standard grid plates. This flexibility makes Grid Plus ideal for creating bespoke AV and connectivity panels.
Applications:
Living room TV connection points
Bedroom digital TV outlets
Multi-room TV distribution systems
Home entertainment installations
New build and renovation projects
Commercial properties requiring TV connectivity
Installation:
The module clips easily into place from the front of any MK Grid Plus mounting frame - no tools required for module installation. The front-loading design means you can add, remove or reconfigure modules without dismantling the entire installation. Professional installation by a qualified electrician or AV installer is recommended.
Grid Plus System Compatibility:
This 1-module TV socket is compatible with all MK Grid Plus mounting frames and plates. Being a 1-module (half-width) unit, you can combine it with other modules:
2-module frames (1-gang plates) - fits 2 × 1-module units
4-module frames (2-gang plates) - fits 4 × 1-module units
6-module frames (3-gang plates) - fits 6 × 1-module units
Mix with other Grid Plus modules (switches, sockets, data outlets)
Available in multiple finishes to match your interior
Technical Specifications:
Model: K5851WHI
Type: Digital TV socket module
Connection: TV (digital television)
Colour: White
Module Width: 1 module (half-width)
Installation: Front-loading clip-in
System: MK Grid Plus modular
SKU: K5851WHI
Note: Mounting frame and grid plate sold separately
Perfect for electricians, AV installers and homeowners creating custom electrical and entertainment installations with the MK Grid Plus modular system. The white finish coordinates with the full Grid Plus range for a professional, cohesive appearance. Ideal for combining TV connectivity with power sockets and other modules in a single plate.
MK Grid Plus K4896FN WHI 20A Double Pole Fan Switch Module - White
This MK Grid Plus 20A double pole fan switch module features clear 'FAN' marking, providing dedicated control for extractor fan circuits. The white rocker switch offers positive on/off control with double pole switching for complete isolation, essential for safe fan operation and maintenance.
Key Features:
20A double pole switch module specifically marked 'FAN'
Double pole switching isolates both live and neutral
White rocker switch with clear on/off marking
Front-loading design - clips into place from front of mounting frame
Essential for extractor fan safety and isolation
Clear 'FAN' marking for easy identification
Modular system allows custom configurations
Compatible with all MK Grid Plus frames and plates
Part of the comprehensive MK Grid Plus range
Backed by MK quality and reliability
Why a Dedicated Fan Switch?
A clearly marked fan switch is essential for bathroom and kitchen extractor fan installations, providing a dedicated isolation point that's easily identifiable. The 'FAN' marking ensures everyone in the household knows this switch controls the extractor fan, allowing for safe isolation during cleaning, maintenance or when the fan needs to be disconnected.
Applications:
Bathroom extractor fan control
Kitchen extractor fan installations
Utility room ventilation fan circuits
Inline extractor fan control
Commercial ventilation fan installations
Any location requiring dedicated fan isolation
Double Pole Switching:
The double pole switch breaks both the live and neutral connections simultaneously, providing complete electrical isolation. This is essential for fan installations, ensuring safe disconnection for cleaning, maintenance or when the fan needs servicing. Double pole switching is safer than single pole and often required for bathroom installations.
MK Grid Plus System:
MK Grid Plus is a modular wiring accessory system that allows you to create custom switch and socket configurations. Individual modules clip into mounting frames, which are then fitted into standard grid plates. This flexibility makes Grid Plus ideal for creating bespoke control panels in bathrooms, kitchens and utility rooms.
Installation:
The module clips easily into place from the front of any MK Grid Plus mounting frame - no tools required for module installation. The front-loading design means you can add, remove or reconfigure modules without dismantling the entire installation. Professional installation by a qualified electrician is required for all electrical work.
Grid Plus System Compatibility:
This fan switch module is compatible with all MK Grid Plus mounting frames and plates:
2-module frames (1-gang plates)
4-module frames (2-gang plates)
6-module frames (3-gang plates)
Available in multiple finishes to match your interior
Technical Specifications:
Model: K4896FN WHI
Type: 20A double pole fan switch module
Switching: Double pole (isolates live and neutral)
Current Rating: 20A
Marking: 'FAN' clearly printed
Colour: White
Switch Type: Rocker with on/off marking
Module Width: 2 modules (full-width)
Installation: Front-loading clip-in
System: MK Grid Plus modular
SKU: K4896FN WHI
Note: Mounting frame and grid plate sold separately
Perfect for electricians, contractors and homeowners creating custom electrical installations with the MK Grid Plus modular system. The white finish coordinates with the full Grid Plus range for a professional appearance. Essential for extractor fan installations, providing safe, clearly marked isolation for ventilation systems.
MK Grid Plus K4896BR WHI 20A Double Pole Boiler Switch Module - White
This MK Grid Plus 20A double pole boiler switch module features clear 'BOILER' marking, providing dedicated control for boiler circuits. The white rocker switch offers positive on/off control with double pole switching for complete isolation, essential for safe boiler operation and maintenance.
Key Features:
20A double pole switch module specifically marked 'BOILER'
Double pole switching isolates both live and neutral
White rocker switch with clear on/off marking
Front-loading design - clips into place from front of mounting frame
Essential for boiler safety and isolation
Clear 'BOILER' marking for easy identification
Modular system allows custom configurations
Compatible with all MK Grid Plus frames and plates
Part of the comprehensive MK Grid Plus range
Backed by MK quality and reliability
Why a Dedicated Boiler Switch?
A clearly marked boiler switch is essential for central heating installations, providing a dedicated isolation point that's easily identifiable for servicing and emergencies. The 'BOILER' marking ensures everyone in the household knows this switch controls the boiler, allowing for safe isolation during maintenance, servicing or when the boiler needs to be disconnected.
Applications:
Central heating boiler control
Combi boiler installations
System boiler circuits
Airing cupboard boiler control
Commercial boiler installations
Any location requiring dedicated boiler isolation
Double Pole Switching:
The double pole switch breaks both the live and neutral connections simultaneously, providing complete electrical isolation. This is essential for boiler installations, ensuring safe disconnection for servicing, maintenance or emergency situations. Double pole switching is safer than single pole and often required by regulations for heating appliances.
MK Grid Plus System:
MK Grid Plus is a modular wiring accessory system that allows you to create custom switch and socket configurations. Individual modules clip into mounting frames, which are then fitted into standard grid plates. This flexibility makes Grid Plus ideal for creating bespoke control panels in airing cupboards, utility rooms and plant rooms.
Installation:
The module clips easily into place from the front of any MK Grid Plus mounting frame - no tools required for module installation. The front-loading design means you can add, remove or reconfigure modules without dismantling the entire installation. Professional installation by a qualified electrician is required for all electrical work.
Grid Plus System Compatibility:
This boiler switch module is compatible with all MK Grid Plus mounting frames and plates:
2-module frames (1-gang plates)
4-module frames (2-gang plates)
6-module frames (3-gang plates)
Available in multiple finishes to match your interior
Technical Specifications:
Model: K4896BR WHI
Type: 20A double pole boiler switch module
Switching: Double pole (isolates live and neutral)
Current Rating: 20A
Marking: 'BOILER' clearly printed
Colour: White
Switch Type: Rocker with on/off marking
Module Width: 2 modules (full-width)
Installation: Front-loading clip-in
System: MK Grid Plus modular
SKU: K4896BR WHI
Note: Mounting frame and grid plate sold separately
Perfect for electricians, heating engineers and homeowners creating custom electrical installations with the MK Grid Plus modular system. The white finish coordinates with the full Grid Plus range for a professional appearance. Essential for boiler installations, providing safe, clearly marked isolation for central heating systems.
MK Grid Plus K4896CH WHI 20A Double Pole Cooker Hood Switch Module - White
This MK Grid Plus 20A double pole cooker hood switch module features clear 'COOKER HOOD' marking, providing dedicated control for cooker hood/extractor fan circuits. The white rocker switch offers positive on/off control with double pole switching for complete isolation, essential for safe cooker hood operation and maintenance.
Key Features:
20A double pole switch module specifically marked 'COOKER HOOD'
Double pole switching isolates both live and neutral
White rocker switch with clear on/off marking
Front-loading design - clips into place from front of mounting frame
Essential for cooker hood safety and isolation
Clear 'COOKER HOOD' marking for easy identification
Modular system allows custom configurations
Compatible with all MK Grid Plus frames and plates
Part of the comprehensive MK Grid Plus range
Backed by MK quality and reliability
Why a Dedicated Cooker Hood Switch?
A clearly marked cooker hood switch is essential for kitchen installations, providing a dedicated isolation point that's easily identifiable. The 'COOKER HOOD' marking ensures everyone in the household knows this switch controls the extractor fan, allowing for safe isolation during filter cleaning, maintenance or when the hood needs to be disconnected.
Applications:
Cooker hood/extractor fan control in kitchens
Integrated cooker hood installations
Commercial kitchen extractor control
Canopy hood circuits
Any location requiring dedicated cooker hood isolation
Double Pole Switching:
The double pole switch breaks both the live and neutral connections simultaneously, providing complete electrical isolation. This is essential for cooker hood installations, ensuring safe disconnection for filter cleaning, maintenance or when the hood needs servicing. Double pole switching is safer than single pole and often required for kitchen appliances.
MK Grid Plus System:
MK Grid Plus is a modular wiring accessory system that allows you to create custom switch and socket configurations. Individual modules clip into mounting frames, which are then fitted into standard grid plates. This flexibility makes Grid Plus ideal for creating bespoke control panels in kitchens, combining cooker hood switches with hob controls, socket outlets and other appliance switches.
Installation:
The module clips easily into place from the front of any MK Grid Plus mounting frame - no tools required for module installation. The front-loading design means you can add, remove or reconfigure modules without dismantling the entire installation. Professional installation by a qualified electrician is required for all electrical work.
Grid Plus System Compatibility:
This cooker hood switch module is compatible with all MK Grid Plus mounting frames and plates:
2-module frames (1-gang plates)
4-module frames (2-gang plates)
6-module frames (3-gang plates)
Available in multiple finishes to match your interior
Technical Specifications:
Model: K4896CH WHI
Type: 20A double pole cooker hood switch module
Switching: Double pole (isolates live and neutral)
Current Rating: 20A
Marking: 'COOKER HOOD' clearly printed
Colour: White
Switch Type: Rocker with on/off marking
Module Width: 2 modules (full-width)
Installation: Front-loading clip-in
System: MK Grid Plus modular
SKU: K4896CH WHI
Note: Mounting frame and grid plate sold separately
Perfect for electricians, contractors and homeowners creating custom electrical installations with the MK Grid Plus modular system. The white finish coordinates with the full Grid Plus range for a professional appearance. Essential for cooker hood installations, providing safe, clearly marked isolation for kitchen extractor fans.
MK Grid Plus K4896TD WHI 20A Double Pole Tumble Dryer Switch Module - White
This MK Grid Plus 20A double pole tumble dryer switch module features clear 'TUMBLE DRYER' marking, providing dedicated control for tumble dryer circuits. The white rocker switch offers positive on/off control with double pole switching for complete isolation, preventing accidental tumble dryer disconnection.
Key Features:
20A double pole switch module specifically marked 'TUMBLE DRYER'
Double pole switching isolates both live and neutral
White rocker switch with clear on/off marking
Front-loading design - clips into place from front of mounting frame
Prevents accidental tumble dryer disconnection
Clear 'TUMBLE DRYER' marking for easy identification
Modular system allows custom configurations
Compatible with all MK Grid Plus frames and plates
Part of the comprehensive MK Grid Plus range
Backed by MK quality and reliability
Why a Dedicated Tumble Dryer Switch?
A clearly marked tumble dryer switch prevents accidental disconnection of your tumble dryer - particularly important in utility rooms where multiple appliances may share socket outlets. The 'TUMBLE DRYER' marking ensures everyone in the household knows this switch controls the tumble dryer, preventing interruption to drying cycles and potential damage from incomplete programmes.
Applications:
Dedicated tumble dryer control in utility rooms
Kitchen tumble dryer installations
Garage and outbuilding tumble dryer circuits
Commercial laundry tumble dryer control
Any location where tumble dryer needs dedicated, clearly marked control
Double Pole Switching:
The double pole switch breaks both the live and neutral connections simultaneously, providing complete electrical isolation. This is safer than single pole switching and allows for proper isolation during maintenance, servicing or when the tumble dryer needs to be disconnected.
MK Grid Plus System:
MK Grid Plus is a modular wiring accessory system that allows you to create custom switch and socket configurations. Individual modules clip into mounting frames, which are then fitted into standard grid plates. This flexibility makes Grid Plus ideal for creating bespoke control panels in utility rooms, combining tumble dryer switches with washing machine controls and socket outlets.
Installation:
The module clips easily into place from the front of any MK Grid Plus mounting frame - no tools required for module installation. The front-loading design means you can add, remove or reconfigure modules without dismantling the entire installation. Professional installation by a qualified electrician is required for all electrical work.
Grid Plus System Compatibility:
This tumble dryer switch module is compatible with all MK Grid Plus mounting frames and plates:
2-module frames (1-gang plates)
4-module frames (2-gang plates)
6-module frames (3-gang plates)
Available in multiple finishes to match your interior
Technical Specifications:
Model: K4896TD WHI
Type: 20A double pole tumble dryer switch module
Switching: Double pole (isolates live and neutral)
Current Rating: 20A
Marking: 'TUMBLE DRYER' clearly printed
Colour: White
Switch Type: Rocker with on/off marking
Module Width: 2 modules (full-width)
Installation: Front-loading clip-in
System: MK Grid Plus modular
SKU: K4896TD WHI
Note: Mounting frame and grid plate sold separately
Perfect for electricians, contractors and homeowners creating custom electrical installations with the MK Grid Plus modular system. The white finish coordinates with the full Grid Plus range for a professional appearance. Essential for preventing accidental tumble dryer disconnection and ensuring safe isolation for maintenance.
MK Grid Plus K4896HB WHI 20A Double Pole Hob Switch Module - White
This MK Grid Plus 20A double pole hob switch module features clear 'HOB' marking, providing dedicated control for electric hob circuits. The white rocker switch offers positive on/off control with double pole switching for complete isolation, essential for safe hob operation and maintenance.
Key Features:
20A double pole switch module specifically marked 'HOB'
Double pole switching isolates both live and neutral
White rocker switch with clear on/off marking
Front-loading design - clips into place from front of mounting frame
Essential for electric hob safety and isolation
Clear 'HOB' marking for easy identification
Modular system allows custom configurations
Compatible with all MK Grid Plus frames and plates
Part of the comprehensive MK Grid Plus range
Backed by MK quality and reliability
Why a Dedicated Hob Switch?
A clearly marked hob switch is essential for electric hob installations, providing a dedicated isolation point that's easily identifiable in emergencies. The 'HOB' marking ensures everyone in the household knows this switch controls the hob, allowing for quick disconnection if needed and safe isolation during cleaning or maintenance.
Applications:
Electric hob control in kitchens
Induction hob installations
Ceramic hob circuits
Commercial kitchen hob control
Any location requiring dedicated hob isolation
Double Pole Switching:
The double pole switch breaks both the live and neutral connections simultaneously, providing complete electrical isolation. This is essential for hob installations, ensuring safe disconnection for cleaning, maintenance or emergency situations. Double pole switching is safer than single pole and often required by regulations for cooking appliances.
MK Grid Plus System:
MK Grid Plus is a modular wiring accessory system that allows you to create custom switch and socket configurations. Individual modules clip into mounting frames, which are then fitted into standard grid plates. This flexibility makes Grid Plus ideal for creating bespoke control panels in kitchens, combining hob switches with socket outlets and other appliance controls.
Installation:
The module clips easily into place from the front of any MK Grid Plus mounting frame - no tools required for module installation. The front-loading design means you can add, remove or reconfigure modules without dismantling the entire installation. Professional installation by a qualified electrician is required for all electrical work.
Grid Plus System Compatibility:
This hob switch module is compatible with all MK Grid Plus mounting frames and plates:
2-module frames (1-gang plates)
4-module frames (2-gang plates)
6-module frames (3-gang plates)
Available in multiple finishes to match your interior
Technical Specifications:
Model: K4896HB WHI
Type: 20A double pole hob switch module
Switching: Double pole (isolates live and neutral)
Current Rating: 20A
Marking: 'HOB' clearly printed
Colour: White
Switch Type: Rocker with on/off marking
Module Width: 2 modules (full-width)
Installation: Front-loading clip-in
System: MK Grid Plus modular
SKU: K4896HB WHI
Note: Mounting frame and grid plate sold separately
Perfect for electricians, contractors and homeowners creating custom electrical installations with the MK Grid Plus modular system. The white finish coordinates with the full Grid Plus range for a professional appearance. Essential for electric hob installations, providing safe, clearly marked isolation for cooking appliances.
MK Grid Plus K4896FG WHI 20A Double Pole Fridge Switch Module - White
This MK Grid Plus 20A double pole fridge switch module features clear 'FRIDGE' marking, providing dedicated control for fridge circuits. The white rocker switch offers positive on/off control with double pole switching for complete isolation, preventing accidental fridge disconnection.
Key Features:
20A double pole switch module specifically marked 'FRIDGE'
Double pole switching isolates both live and neutral
White rocker switch with clear on/off marking
Front-loading design - clips into place from front of mounting frame
Prevents accidental fridge disconnection
Clear 'FRIDGE' marking for easy identification
Modular system allows custom configurations
Compatible with all MK Grid Plus frames and plates
Part of the comprehensive MK Grid Plus range
Backed by MK quality and reliability
Why a Dedicated Fridge Switch?
A clearly marked fridge switch prevents accidental disconnection of your fridge - a common problem when fridges share sockets with other kitchen appliances. The 'FRIDGE' marking ensures everyone in the household knows this switch controls the fridge, helping prevent costly food spoilage from accidental power loss.
Applications:
Dedicated fridge control in kitchens
Garage and utility room fridge circuits
Basement and outbuilding fridge installations
Commercial kitchen fridge control
Any location where fridge needs dedicated, clearly marked control
Double Pole Switching:
The double pole switch breaks both the live and neutral connections simultaneously, providing complete electrical isolation. This is safer than single pole switching and allows for proper isolation during maintenance or when the fridge needs to be disconnected.
MK Grid Plus System:
MK Grid Plus is a modular wiring accessory system that allows you to create custom switch and socket configurations. Individual modules clip into mounting frames, which are then fitted into standard grid plates. This flexibility makes Grid Plus ideal for creating bespoke control panels in kitchens, utility rooms and workshops.
Installation:
The module clips easily into place from the front of any MK Grid Plus mounting frame - no tools required for module installation. The front-loading design means you can add, remove or reconfigure modules without dismantling the entire installation. Professional installation by a qualified electrician is required for all electrical work.
Grid Plus System Compatibility:
This fridge switch module is compatible with all MK Grid Plus mounting frames and plates:
2-module frames (1-gang plates)
4-module frames (2-gang plates)
6-module frames (3-gang plates)
Available in multiple finishes to match your interior
Technical Specifications:
Model: K4896FG WHI
Type: 20A double pole fridge switch module
Switching: Double pole (isolates live and neutral)
Current Rating: 20A
Marking: 'FRIDGE' clearly printed
Colour: White
Switch Type: Rocker with on/off marking
Module Width: 2 modules (full-width)
Installation: Front-loading clip-in
System: MK Grid Plus modular
SKU: K4896FG WHI
Note: Mounting frame and grid plate sold separately
Perfect for electricians, contractors and homeowners creating custom electrical installations with the MK Grid Plus modular system. The white finish coordinates with the full Grid Plus range for a professional appearance. Essential for preventing accidental fridge disconnection - protecting your fresh food investment.
MK Grid Plus K4896DW WHI 20A Double Pole Dishwasher Switch Module - White
This MK Grid Plus 20A double pole dishwasher switch module features clear 'DISHWASHER' marking, providing dedicated control for dishwasher circuits. The white rocker switch offers positive on/off control with double pole switching for complete isolation, preventing accidental dishwasher disconnection.
Key Features:
20A double pole switch module specifically marked 'DISHWASHER'
Double pole switching isolates both live and neutral
White rocker switch with clear on/off marking
Front-loading design - clips into place from front of mounting frame
Prevents accidental dishwasher disconnection
Clear 'DISHWASHER' marking for easy identification
Modular system allows custom configurations
Compatible with all MK Grid Plus frames and plates
Part of the comprehensive MK Grid Plus range
Backed by MK quality and reliability
Why a Dedicated Dishwasher Switch?
A clearly marked dishwasher switch prevents accidental disconnection of your dishwasher - particularly important in kitchens where multiple appliances may share socket outlets. The 'DISHWASHER' marking ensures everyone in the household knows this switch controls the dishwasher, preventing interruption to wash cycles and potential damage from incomplete programmes.
Applications:
Dedicated dishwasher control in kitchens
Integrated dishwasher installations
Utility room dishwasher circuits
Commercial kitchen dishwasher control
Any location where dishwasher needs dedicated, clearly marked control
Double Pole Switching:
The double pole switch breaks both the live and neutral connections simultaneously, providing complete electrical isolation. This is safer than single pole switching and allows for proper isolation during maintenance, servicing or when the dishwasher needs to be disconnected.
MK Grid Plus System:
MK Grid Plus is a modular wiring accessory system that allows you to create custom switch and socket configurations. Individual modules clip into mounting frames, which are then fitted into standard grid plates. This flexibility makes Grid Plus ideal for creating bespoke control panels in kitchens, utility rooms and workshops.
Installation:
The module clips easily into place from the front of any MK Grid Plus mounting frame - no tools required for module installation. The front-loading design means you can add, remove or reconfigure modules without dismantling the entire installation. Professional installation by a qualified electrician is required for all electrical work.
Grid Plus System Compatibility:
This dishwasher switch module is compatible with all MK Grid Plus mounting frames and plates:
2-module frames (1-gang plates)
4-module frames (2-gang plates)
6-module frames (3-gang plates)
Available in multiple finishes to match your interior
Technical Specifications:
Model: K4896DW WHI
Type: 20A double pole dishwasher switch module
Switching: Double pole (isolates live and neutral)
Current Rating: 20A
Marking: 'DISHWASHER' clearly printed
Colour: White
Switch Type: Rocker with on/off marking
Module Width: 2 modules (full-width)
Installation: Front-loading clip-in
System: MK Grid Plus modular
SKU: K4896DW WHI
Note: Mounting frame and grid plate sold separately
Perfect for electricians, contractors and homeowners creating custom electrical installations with the MK Grid Plus modular system. The white finish coordinates with the full Grid Plus range for a professional appearance. Essential for preventing accidental dishwasher disconnection and ensuring safe isolation for maintenance.
MK Grid Plus K4896FF WHI 20A Double Pole Fridge Freezer Switch Module - White
This MK Grid Plus 20A double pole fridge freezer switch module features clear 'FRIDGE FREEZER' marking, providing dedicated control for fridge freezer circuits. The white rocker switch offers positive on/off control with double pole switching for complete isolation, preventing accidental fridge freezer disconnection.
Key Features:
20A double pole switch module specifically marked 'FRIDGE FREEZER'
Double pole switching isolates both live and neutral
White rocker switch with clear on/off marking
Front-loading design - clips into place from front of mounting frame
Prevents accidental fridge freezer disconnection
Clear 'FRIDGE FREEZER' marking for easy identification
Modular system allows custom configurations
Compatible with all MK Grid Plus frames and plates
Part of the comprehensive MK Grid Plus range
Backed by MK quality and reliability
Why a Dedicated Fridge Freezer Switch?
A clearly marked fridge freezer switch prevents accidental disconnection of your appliance - a common problem when fridge freezers share sockets with other kitchen equipment. The 'FRIDGE FREEZER' marking ensures everyone in the household knows this switch controls the fridge freezer, helping prevent costly food spoilage from accidental power loss.
Applications:
Dedicated fridge freezer control in kitchens
Garage and utility room fridge freezer circuits
Basement and outbuilding installations
Commercial kitchen fridge freezer control
Any location where fridge freezer needs dedicated, clearly marked control
Double Pole Switching:
The double pole switch breaks both the live and neutral connections simultaneously, providing complete electrical isolation. This is safer than single pole switching and allows for proper isolation during maintenance or when the fridge freezer needs to be disconnected.
MK Grid Plus System:
MK Grid Plus is a modular wiring accessory system that allows you to create custom switch and socket configurations. Individual modules clip into mounting frames, which are then fitted into standard grid plates. This flexibility makes Grid Plus ideal for creating bespoke control panels in kitchens, utility rooms and workshops.
Installation:
The module clips easily into place from the front of any MK Grid Plus mounting frame - no tools required for module installation. The front-loading design means you can add, remove or reconfigure modules without dismantling the entire installation. Professional installation by a qualified electrician is required for all electrical work.
Grid Plus System Compatibility:
This fridge freezer switch module is compatible with all MK Grid Plus mounting frames and plates:
2-module frames (1-gang plates)
4-module frames (2-gang plates)
6-module frames (3-gang plates)
Available in multiple finishes to match your interior
Technical Specifications:
Model: K4896FF WHI
Type: 20A double pole fridge freezer switch module
Switching: Double pole (isolates live and neutral)
Current Rating: 20A
Marking: 'FRIDGE FREEZER' clearly printed
Colour: White
Switch Type: Rocker with on/off marking
Module Width: 2 modules (full-width)
Installation: Front-loading clip-in
System: MK Grid Plus modular
SKU: K4896FF WHI
Note: Mounting frame and grid plate sold separately
Perfect for electricians, contractors and homeowners creating custom electrical installations with the MK Grid Plus modular system. The white finish coordinates with the full Grid Plus range for a professional appearance. Essential for preventing accidental fridge freezer disconnection - protecting your fresh and frozen food investment.
MK Grid Plus K4896FZ WHI 20A Double Pole Freezer Switch Module - White
This MK Grid Plus 20A double pole freezer switch module features clear 'FREEZER' marking, providing dedicated control for freezer circuits. The white rocker switch offers positive on/off control with double pole switching for complete isolation, preventing accidental freezer disconnection.
Key Features:
20A double pole switch module specifically marked 'FREEZER'
Double pole switching isolates both live and neutral
White rocker switch with clear on/off marking
Front-loading design - clips into place from front of mounting frame
Prevents accidental freezer disconnection
Clear 'FREEZER' marking for easy identification
Modular system allows custom configurations
Compatible with all MK Grid Plus frames and plates
Part of the comprehensive MK Grid Plus range
Backed by MK quality and reliability
Why a Dedicated Freezer Switch?
A clearly marked freezer switch prevents accidental disconnection of your freezer - a common problem when freezers share sockets with other appliances. The 'FREEZER' marking ensures everyone in the household knows this switch controls the freezer, helping prevent costly food spoilage from accidental power loss.
Applications:
Dedicated freezer control in kitchens
Garage and utility room freezer circuits
Basement and outbuilding freezer installations
Commercial kitchen freezer control
Any location where freezer needs dedicated, clearly marked control
Double Pole Switching:
The double pole switch breaks both the live and neutral connections simultaneously, providing complete electrical isolation. This is safer than single pole switching and allows for proper isolation during maintenance or when the freezer needs to be disconnected.
MK Grid Plus System:
MK Grid Plus is a modular wiring accessory system that allows you to create custom switch and socket configurations. Individual modules clip into mounting frames, which are then fitted into standard grid plates. This flexibility makes Grid Plus ideal for creating bespoke control panels in kitchens, utility rooms and workshops.
Installation:
The module clips easily into place from the front of any MK Grid Plus mounting frame - no tools required for module installation. The front-loading design means you can add, remove or reconfigure modules without dismantling the entire installation. Professional installation by a qualified electrician is required for all electrical work.
Grid Plus System Compatibility:
This freezer switch module is compatible with all MK Grid Plus mounting frames and plates:
2-module frames (1-gang plates)
4-module frames (2-gang plates)
6-module frames (3-gang plates)
Available in multiple finishes to match your interior
Technical Specifications:
Model: K4896FZ WHI
Type: 20A double pole freezer switch module
Switching: Double pole (isolates live and neutral)
Current Rating: 20A
Marking: 'FREEZER' clearly printed
Colour: White
Switch Type: Rocker with on/off marking
Module Width: 2 modules (full-width)
Installation: Front-loading clip-in
System: MK Grid Plus modular
SKU: K4896FZ WHI
Note: Mounting frame and grid plate sold separately
Perfect for electricians, contractors and homeowners creating custom electrical installations with the MK Grid Plus modular system. The white finish coordinates with the full Grid Plus range for a professional appearance. Essential for preventing accidental freezer disconnection - protecting your frozen food investment.
MK Grid Plus K4896WDR WHI 20A Double Pole Switch Module - White
This MK Grid Plus 20A double pole dishwasher switch module features clear 'Washer Dryer' marking, providing dedicated control for dishwasher circuits. The white rocker switch offers positive on/off control with double pole switching for complete isolation, preventing accidental dishwasher disconnection.
Key Features:
20A double pole switch module for MK Grid Plus system
Double pole switching isolates both live and neutral
White rocker switch with clear on/off marking
Front-loading design - clips into place from front of mounting frame
Suitable for high-power appliances up to 20A
Modular system allows custom configurations
Compatible with all MK Grid Plus frames and plates
Positive switching action for reliable operation
Part of the comprehensive MK Grid Plus range
Backed by MK quality and reliability
What is Double Pole Switching?
A double pole switch breaks both the live and neutral connections simultaneously, providing complete electrical isolation. This is essential for certain appliances and required by regulations for equipment like water heaters, immersion heaters and some cooking appliances. Single pole switches only break the live connection, whereas double pole switches provide full isolation for safer maintenance and servicing.
Applications:
Immersion heater control
Water heater isolation
Electric cooker circuits
Kitchen appliance control (ovens, hobs)
Workshop equipment isolation
Commercial kitchen installations
Any application requiring full circuit isolation
Why Use MK Grid Plus?
MK Grid Plus is a modular wiring accessory system that allows you to create custom switch and socket configurations to suit your exact requirements. Individual modules (switches, sockets, fuse units, dimmers, data outlets) clip into mounting frames, which are then fitted into standard grid plates. This flexibility makes Grid Plus ideal for kitchens, workshops, offices and anywhere requiring multiple electrical functions in a single location.
Installation:
The module clips easily into place from the front of any MK Grid Plus mounting frame - no tools required for module installation. The front-loading design means you can add, remove or reconfigure modules without dismantling the entire installation. Professional installation by a qualified electrician is required for all electrical work.
Grid Plus System Compatibility:
This 20A double pole switch module is compatible with all MK Grid Plus mounting frames and plates, available in various configurations:
2-module frames (1-gang plates)
4-module frames (2-gang plates)
6-module frames (3-gang plates)
Available in multiple finishes to match your interior
Technical Specifications:
Model: K4896WDR WHI
Type: 20A double pole switch module
Switching: Double pole (isolates live and neutral)
Current Rating: 20A
Colour: White
Switch Type: Rocker with on/off marking
Module Width: 2 modules (full-width)
Installation: Front-loading clip-in
System: MK Grid Plus modular
SKU: K4896WDR WHI
Note: Mounting frame and grid plate sold separately
Perfect for electricians, contractors and homeowners creating custom electrical installations with the MK Grid Plus modular system. The white finish coordinates with the full Grid Plus range for a professional, cohesive appearance. Essential for applications requiring full electrical isolation and compliant with regulations for water heater and immersion heater control.
MK Grid Plus K4890WHI 13A Fuse Unit Module - White
This MK Grid Plus 13A fuse unit module provides individual circuit protection for appliances and equipment within modular grid plate systems. The white fuse carrier comes complete with a 13A cartridge fuse link to BS 1362 and clips easily into MK Grid Plus mounting frames for flexible, customisable electrical installations.
Key Features:
13A fuse unit module for MK Grid Plus system
Supplied complete with 13A cartridge fuse link to BS 1362
White finish to match Grid Plus range
Front-loading design - clips into place from front of mounting frame
Individual circuit protection for appliances
Modular system allows custom configurations
Easy fuse replacement without removing module
Compatible with all MK Grid Plus frames and plates
Compact dimensions: 48mm × 23mm × 32mm
Part of the comprehensive MK Grid Plus range
What is MK Grid Plus?
MK Grid Plus is a modular wiring accessory system that allows you to create custom switch and socket configurations to suit your exact requirements. Individual modules (switches, sockets, fuse units, dimmers, data outlets) clip into mounting frames, which are then fitted into standard grid plates. This flexibility makes Grid Plus ideal for kitchens, workshops, offices and anywhere requiring multiple electrical functions in a single location.
Why Use a Fuse Unit Module?
A fuse unit module provides individual circuit protection for specific appliances or equipment. This is particularly useful for:
Protecting individual appliances in kitchen grid plates
Isolating circuits for easy maintenance
Providing dedicated protection for sensitive equipment
Complying with regulations requiring fused connections
Replacing blown fuses without affecting other circuits
Applications:
Kitchen worktop grid plates (for appliances like microwaves, kettles)
Workshop and garage installations
Office and commercial environments
Laboratory and technical spaces
Retail and hospitality settings
Any location requiring individual circuit protection
Installation:
The module clips easily into place from the front of any MK Grid Plus mounting frame - no tools required for module installation. The front-loading design means you can add, remove or reconfigure modules without dismantling the entire installation. Fuse replacement is equally simple, with the fuse carrier accessible from the front.
Grid Plus System Compatibility:
This fuse unit module is compatible with all MK Grid Plus mounting frames and plates, available in various configurations:
2-module frames (1-gang plates)
4-module frames (2-gang plates)
6-module frames (3-gang plates)
Available in multiple finishes to match your interior
Technical Specifications:
Model: K4890WHI
Type: 13A fuse unit module
Fuse: 13A cartridge fuse link (included)
Standard: BS 1362
Colour: White
Dimensions: 48mm (W) × 23mm (H) × 32mm (D)
Module Width: 1 module (half-width)
Installation: Front-loading clip-in
System: MK Grid Plus modular
Barcode: 5017490224279
SKU: K4890 WHI
What's Included:
1 × MK Grid Plus 13A fuse unit module (white)
1 × 13A cartridge fuse link to BS 1362
Note: Mounting frame and grid plate sold separately
Perfect for electricians, contractors and homeowners creating custom electrical installations with the MK Grid Plus modular system. The white finish coordinates with the full Grid Plus range for a professional, cohesive appearance. Professional installation by a qualified electrician is required.
MK Logic Plus K3554DABWHI Quadplexer Outlet - TV/FM/DAB/Twin Satellite - White
This MK Logic Plus quadplexer outlet provides comprehensive connectivity for modern digital TV systems and interactive services, combining TV, FM radio, DAB radio and twin satellite connections in a single 1-gang white faceplate. The fully screened non-isolated design ensures reliable signal distribution for multi-room entertainment systems.
Key Features:
Quadplexer outlet with TV, FM, DAB and twin satellite (SAT1/SAT2) connections
Fully screened non-isolated design for digital TV systems
Supports interactive TV services and multi-room installations
1-gang white faceplate (86mm × 86mm)
Antimicrobial thermoset material resists MRSA, E.coli, Salmonella and Klebsiella pneumoniae
Clear terminal markings for easy installation
Backed-out captive screws won't fall out during fitting
Funnel entrances to terminals for easier wiring
In-line terminals for straightforward connections
Backed by MK's 20-year guarantee
What is a Quadplexer?
A quadplexer outlet combines four signal types in a single socket: terrestrial TV, FM radio, DAB digital radio and twin satellite feeds. This allows you to distribute multiple broadcast signals to TVs, radios and satellite receivers throughout your property from a single wall outlet, ideal for modern multi-room entertainment systems.
Twin Satellite Connections:
The twin satellite (SAT1/SAT2) connections are essential for:
Sky+ and Sky Q boxes requiring two satellite feeds
PVR (Personal Video Recorder) systems that record one channel whilst watching another
Freesat+ recorders with dual tuners
Multi-room satellite distribution systems
Applications:
Living rooms with Sky+, Sky Q or Freesat+ boxes
Bedrooms requiring TV, radio and satellite access
Multi-room entertainment systems
New build properties with integrated AV distribution
Home cinema and media room installations
Commercial properties (hotels, care homes, offices)
Installation Benefits:
MK Logic Plus outlets are designed for quick, easy installation with installer-friendly features as standard. Clear terminal markings eliminate guesswork, captive screws stay in place during fitting, funnel entrances guide wires into terminals, and in-line terminal layout simplifies connections.
Antimicrobial Protection:
Manufactured from high-grade thermoset material with inherent antimicrobial properties, this outlet actively resists harmful bacteria including MRSA, E.coli, Salmonella and Klebsiella pneumoniae. This makes it ideal for healthcare environments, care homes and any setting where hygiene is paramount.
Technical Specifications:
Model: K3554DABWHI
Type: Quadplexer outlet (non-isolated, fully screened)
Connections: TV, FM, DAB, SAT1, SAT2
Gangs: 1-gang
Dimensions: 86mm × 86mm
Fixing Centres: 60.3mm
Colour: White
Material: High-grade thermoset with antimicrobial properties
Guarantee: 20 years
Range: MK Logic Plus
Barcode: 5017490438584
SKU: K3554DAB WHI
MK Logic Plus Quality:
MK Logic Plus is MK Electric's original brand that has set the benchmark for quality in wiring accessories. Every product is manufactured from premium materials and backed by MK's reputation for reliability, with a comprehensive 20-year guarantee (10 years for electronic devices) for complete peace of mind.
Perfect for electricians, AV installers and homeowners seeking premium quality connectivity for modern digital TV and satellite systems. Professional installation by a qualified electrician is recommended.
📦 Clearance Stock: Brand new old stock. Missing box and instructions. Sold as seen at a significantly reduced price. No returns on clearance items.
Vent-Axia EuroSeries ESP25014 250mm Axial Plate Fan
The Vent-Axia EuroSeries ESP25014 is a 250mm diameter axial blade plate fan with a single-shot die-cast aluminium impeller and external rotor motor design, delivering reliable commercial-grade ventilation performance. Fully speed controllable and reversible, it suits extract or supply applications in commercial kitchens, industrial ventilation, HVAC systems, plant rooms, and warehouse air handling. IP54 rated, with ball bearings greased for life and Class F motor insulation for operation from -40°C to +70°C.
Key Features
250mm diameter axial plate fan — commercial and industrial grade
Single-shot die-cast aluminium impeller — durable, consistent performance
External rotor motor design — efficient operation with ribbed aluminium motor body for cooling
Fully speed controllable — flexible ventilation output
Reversible — extract or supply applications (note: −30% performance on intake)
IP54 motor protection — dust and moisture resistant (BS EN 60529:1992)
−40°C to +70°C operating range — Class F motor insulation
Thermal overload protection — must be wired into control circuits
Ball bearings greased for life — maintenance-free
ISO 1940 dynamic balance — smooth, quiet operation
2-year manufacturer’s warranty
Technical Specification
Brand: Vent-Axia
Model: EuroSeries ESP25014
SKU: ESP25014
Diameter: 250mm
Phase: Single phase
Poles: 4-pole
Voltage: 220–240V, 50Hz
Motor Type: External rotor, capacitor start and run
Motor Protection: IP54 (BS EN 60529:1992)
Motor Insulation: Class F
Operating Temperature: -40°C to +70°C
Thermal Protection: Thermal overload (must be wired into control circuits)
Bearings: Ball bearings, greased for life
Balance Standard: ISO 1940
Impeller: Single-shot die-cast aluminium
Motor Body: Ribbed aluminium casting
Finish: Epoxy paint, white
Terminal Box: IP54 rated, 20mm and PG11 entry
Speed Control: Fully speed controllable
Reversible: Yes (−30% performance on intake)
Sound Measurement: BS848 Part 2 1985; free field at 3m, ref 2×10⁻⁵ Pa
Country of Origin: United Kingdom
Warranty: 2 years
Applications
Commercial kitchen extraction
Industrial ventilation systems
Warehouse and factory air handling
Commercial building HVAC systems
Plant rooms and mechanical services
Extract or supply air applications
Installation Notes
The thermal overload protection must be wired into all controller circuits and starter contactors. For minimum noise levels during speed control, an auto-transformer speed controller is recommended. When used in intake (supply) mode, performance is reduced by approximately 30%. Professional installation by a qualified electrician or HVAC engineer is required.
Frequently Asked Questions
What does ‘clearance stock’ mean for this product?This unit is brand new old stock — it has never been used or installed. However, the original box and installation instructions are missing. The fan itself is complete and in full working order. Sold as seen at a significantly reduced price.
Is this fan speed controllable?Yes — the ESP25014 is fully speed controllable. For minimum noise during speed control, an auto-transformer speed controller is recommended rather than a standard triac controller.
Can this fan be used for supply (intake) as well as extract?Yes — the fan is reversible. However, performance is reduced by approximately 30% when operating in intake (supply) mode compared to extract mode.
What does the thermal overload protection require?The thermal overload protection must be wired into all controller circuits and starter contactors as part of the installation. This is a safety requirement and must not be bypassed.
Is professional installation required?Yes — this is a commercial/industrial electrical product requiring installation by a qualified electrician or HVAC engineer, wired in accordance with current IEE Wiring Regulations.
Do you need help?Our team is happy to help. Get in touch at customerservice@bubblegumbathrooms.co.uk or call 01603 381095.
MK Logic Plus K3561DABWHI TV/FM/DAB Triplexer Socket with Telephone - White
This MK Logic Plus triplexer outlet combines TV, FM radio, DAB radio and telephone connections in a single white socket, providing comprehensive connectivity for modern home entertainment systems. Part of the premium Logic Plus range, this outlet delivers sophisticated design with advanced technical performance that exceeds British Standard requirements.
Key Benefits:
Triplexer outlet with TV, FM and DAB radio connections
Integrated telephone (BT) socket for complete connectivity
Single screw terminals for quick, secure installation
In-line terminal layout - all wires cut to same length
Captive terminal screws won't fall out during installation
High gloss white thermoset material finish
Scratch-resistant surface maintains appearance
Unobtrusive, sophisticated design for modern interiors
Exceeds British Standard requirements
Backed by MK's 20-year guarantee
Why Choose MK Logic Plus?
Logic Plus wiring devices have been designed to perfectly complement modern interiors, offering an unobtrusive and sophisticated look totally in keeping with today's design trends. Technically, they exceed British Standard requirements with patented features that make them the most advanced and safest products available.
Installation Features:
Easy installation with in-line back terminals
All electrical wires can be cut to the same length
Terminal screws backed out and held captive - won't drop out
Single screw terminals for secure connections
Meets latest technical requirements for modern broadcast technology
Applications:
Living rooms and media rooms
Bedrooms with TV and telephone requirements
Home offices requiring TV and phone connectivity
Modern homes with digital TV and DAB radio
New build and renovation projects
Technical Specifications:
Type: TV/FM/DAB triplexer with telephone socket
Connections: TV, FM, DAB, Telephone (BT)
Colour: White high gloss
Material: High quality thermoset (scratch-resistant)
Terminals: Single screw, in-line, captive
Standards: Exceeds British Standard requirements
Guarantee: 20 years
Product Range: MK Logic Plus
Barcode: 5017490438621
SKU: K3561DAB WHI
Range Compatibility:
Part of the comprehensive MK Logic Plus range of telephone, television and data processing products. Designed to match other Logic Plus wiring accessories for a coordinated installation throughout your property.
Perfect for electricians, contractors and homeowners seeking premium quality AV connectivity with the reliability and longevity MK Electric is renowned for. Professional installation by a qualified electrician is recommended.
MK Logic Plus K3564DABWHI White Moulded 2 Gang Quad TV/FM/DAB/SATx2 Quadplexer with Telephone Secondary Outlet
Product Description
The MK Logic Plus K3564DABWHI 2 Gang Quadplexer Outlet provides a comprehensive connectivity solution for modern multimedia installations, combining TV, FM radio, DAB radio, twin satellite connections, and a telephone secondary outlet within a single faceplate. Manufactured by MK Electric, this outlet forms part of the trusted Logic Plus AV range.
Designed to meet current broadcast, satellite, and telecommunications installation standards, the outlet enables efficient distribution of multiple signal types from a single location. Manufactured from high-grade urea formaldehyde thermoset material, it offers inherent antibacterial and antiviral properties alongside a clean white moulded finish.
Features & Benefits
2 gang quadplexer outlet with TV, FM, DAB and twin satellite connections
Integrated telephone secondary outlet for added connectivity
Ideal for modern home entertainment and media wall installations
Protected, fully enclosed PCB for enhanced reliability
Single screw termination for secure and straightforward wiring
Manufactured from urea formaldehyde thermoset material
Inherent antibacterial and antiviral properties
Independently tested to ISO 22196:2011 with over 99.99% kill rate
White moulded finish to complement modern interiors
Backed by a 10-year guarantee
Applications
Residential multimedia and media wall installations
Homes with twin satellite tuners or PVR systems
Commercial AV and broadcast environments
Integrated TV, radio, satellite, and telephone connection points
Range Compatibility
Part of the MK Logic Plus TV, FM, DAB, satellite, and data outlet range
Designed to match other MK Logic Plus wiring accessories
Charge two electric toothbrushes simultaneously — without a cable in sight. The ProofVision TBCharge In-Wall Dual Electric Toothbrush Charger integrates flush into your bathroom wall, replacing cluttered countertop chargers with a sleek, hotel-style finish. Perfect for couples or family bathrooms, it wirelessly charges two compatible Oral-B io toothbrushes at once. Available in five premium finishes to complement any bathroom scheme.
Key Features
Charges two toothbrushes simultaneously — ideal for couples and family bathrooms
Flush wall-mounted design — no cables, no countertop clutter
Wireless inductive charging — simply place toothbrushes in the holders
IP44 rated — safe for Zone 2 bathroom installation
Fits standard dual gang 47mm backbox — easy retrofit or new build installation
Compatible with Oral-B io2, io3, io4, io5 and io6
5 finishes: White, Matt Black, Brushed Brass, Brushed Steel & Polished Steel (Chrome)
Coloured variants include matching premium faceplate
Professional installation recommended
Oral-B Compatibility
Compatible: Oral-B io2, io3, io4, io5, io6
Not compatible: Oral-B io7, io8, io9, io10 or Pulsonic series
Please verify your Oral-B model before ordering.
Technical Specification
Brand: ProofVision
Range: TBCharge
Capacity: Dual (2 toothbrushes simultaneously)
Charging Method: Wireless inductive
IP Rating: IP44 (Zone 2 bathroom safe)
Installation: Dual gang 47mm backbox (not included)
Country of Origin: United Kingdom
HS Code: 8509800000
Toothbrushes Included: No
Available Finishes
White (SKU: PV11P)
Matt Black (SKU: PV11P+PV11-B-FR) — includes matching black faceplate
Brushed Brass (SKU: PV11P+PV11-BRS-FR) — includes matching brushed brass faceplate
Brushed Steel (SKU: PV11P+PV11-BS-FR) — includes matching brushed steel faceplate
Polished Steel / Chrome (SKU: PV11P+PV11-PS-FR) — includes matching polished steel faceplate
What’s Included
ProofVision TBCharge dual in-wall charger unit
Faceplate in chosen finish
Installation instructions
Toothbrushes not included. Backbox not included.
Complete the ProofVision Range
ProofVision TBCharge In-Wall Single Electric Toothbrush Charger — White
ProofVision In-Wall Electric Toothbrush Charger — Philips Sonicare Compatible
ProofVision Replacement Face Plate — Brass, Steel & Black Finishes
Frequently Asked Questions
Which Oral-B toothbrushes are compatible?The TBCharge Dual is compatible with Oral-B io2, io3, io4, io5, and io6. It is not compatible with Oral-B io7, io8, io9, io10, or the Pulsonic series. Please check your model before ordering.
Do you have a version for Philips Sonicare?Yes — we also stock the ProofVision In-Wall Charger for Philips Sonicare, compatible with the 1000–7000 Series.
What backbox does it require?The TBCharge Dual requires a standard dual gang 47mm backbox, which is not included. This is a common size available from most electrical suppliers.
Is it safe to install in a bathroom?Yes — the TBCharge Dual is IP44 rated, making it suitable for Zone 2 bathroom installations (areas more than 60cm from a bath or shower). Professional installation by a qualified electrician is recommended.
Do the coloured variants include a faceplate?Yes — the Black, Brushed Brass, Brushed Steel, and Polished Steel variants each include a matching premium faceplate. The White variant uses the standard white faceplate. If you want to change the finish of a White unit later, a replacement faceplate is available separately.
What is the difference between the Single and Dual charger?The Single charger holds and charges one toothbrush. The Dual charger holds and charges two toothbrushes simultaneously — ideal for couples or households with two Oral-B io users.
Can I order if the item shows as out of stock?Yes — we accept orders even when stock shows as unavailable. Your order will be fulfilled as soon as stock is replenished. If you need an urgent delivery estimate, please contact us at customerservice@bubblegumbathrooms.co.uk or call 01603 381095 before ordering.
Banish countertop clutter for good with the ProofVision TBCharge In-Wall Single Electric Toothbrush Charger. Designed to integrate flush into your bathroom wall, this clever charging solution replaces messy cables and bulky charging stands with a sleek, hotel-style finish. Simply place your compatible Oral-B io toothbrush in the holder and it charges wirelessly — no cables, no fuss. Available in two variants: charger only, or charger with integrated shaver socket.
Key Features
Flush wall-mounted design — no cables, no countertop clutter
Wireless inductive charging — simply place your toothbrush in the holder
IP44 rated — safe for Zone 2 bathroom installation
Fits standard dual gang 47mm backbox — easy retrofit or new build installation
Compatible with Oral-B io2, io3, io4, io5 and io6
White faceplate as standard — upgrade with optional premium faceplates
Available with or without integrated shaver socket
Professional installation recommended
Oral-B Compatibility
Compatible: Oral-B io2, io3, io4, io5, io6
Not compatible: Oral-B io7, io8, io9, io10 or Pulsonic series
Please verify your Oral-B model before ordering.
Technical Specification
Brand: ProofVision
Range: TBCharge
Capacity: Single toothbrush
Charging Method: Wireless inductive
IP Rating: IP44 (Zone 2 bathroom safe)
Installation: Dual gang 47mm backbox (not included)
Standard Finish: White
Optional Finishes: Matt Black, Brushed Steel, Polished Steel, Brushed Brass (via replacement faceplate)
Variants: Toothbrush Charger only (SKU: PV10P, £45.99) | Charger with Shaver Socket (SKU: PV12P, £65.99)
Country of Origin: United Kingdom
Toothbrush Included: No
What's Included
ProofVision TBCharge in-wall charger unit with white faceplate
Installation instructions
Toothbrush not included. Backbox not included.
Customise Your Finish
The standard white faceplate suits most bathroom schemes, but if you want to match your fixtures perfectly, upgrade with a ProofVision Replacement Face Plate — available in Matt Black, Brushed Steel, Polished Steel, and Brushed Brass.
Complete the ProofVision Range
ProofVision TBCharge In-Wall Dual Electric Toothbrush Charger — White
ProofVision Replacement Face Plate — Brass, Steel & Black Finishes
Frequently Asked Questions
Which Oral-B toothbrushes are compatible?
The TBCharge is compatible with Oral-B io2, io3, io4, io5, and io6. It is not compatible with Oral-B io7, io8, io9, io10, or the Pulsonic series. Please check your model before ordering.
What backbox does it require?
The TBCharge requires a standard dual gang 47mm backbox, which is not included. This is a common size available from most electrical suppliers.
Is it safe to install in a bathroom?
Yes — the TBCharge is IP44 rated, making it suitable for Zone 2 bathroom installations (areas more than 60cm from a bath or shower). Professional installation by a qualified electrician is recommended.
Can I get it in a different finish?
Yes — the unit ships with a white faceplate as standard. You can upgrade to Matt Black, Brushed Steel, Polished Steel, or Brushed Brass using a ProofVision Replacement Face Plate, sold separately.
What is the difference between the two variants?
The Toothbrush Charger (PV10P, £45.99) is the charger unit only. The Charger with Shaver Socket (PV12P, £65.99) includes an integrated shaver socket alongside the toothbrush charger — ideal if you also want to charge an electric shaver from the same wall plate.
Can I order if the item shows as out of stock?
Yes — we can accept orders on out-of-stock items. Please contact us on 01603 381095 to confirm lead time before ordering.
A bright, dimmable LED GU10 spotlight at a clearance price. The Bell 7W Dimmable LED GU10 (SKU: 05178) delivers crisp cool white light with a 36° flood beam — ideal for general room lighting, kitchens, bathrooms, offices, and commercial spaces. Replaces a 50W halogen at a fraction of the running cost, with full dimming control for flexible ambience.
Key Features
7W LED — replaces 50W halogen; saves up to 86% on energy costs
Fully Dimmable — smooth dimming control; requires LED-compatible dimmer switch
36° Flood Beam — wider, more even light distribution than narrow spot beams
4000K Cool White — bright, crisp, neutral white; ideal for task lighting
575 Lumens — strong output for a 7W lamp
CRI 80+ — good colour rendering for accurate, natural-looking light
25,000+ Hour Lifespan — long-lasting, low maintenance
Instant Full Brightness — no warm-up delay
Standard GU10 Fitting — twist-and-lock; fits all standard GU10 downlight fittings
Technical Specification
Brand: Bell Lighting
SKU / Part Number: 05178
Barcode (EAN): 5013588051789
Power: 7W LED (replaces 50W halogen)
Cap Type: GU10 (Twist & Lock / 2-pin)
Colour Temperature: 4000K Cool White
Brightness: 575 lumens (approx.)
Beam Angle: 36° (Flood)
Dimmable: Yes (LED-compatible dimmer required)
Voltage: 240V AC
Dimensions: 50mm diameter × 56mm length
CRI: 80+ Ra
Lifespan: 25,000+ hours
Energy Rating: A+
Frequently Asked Questions
Will this fit my existing GU10 downlight fitting?Yes — this uses a standard GU10 twist-and-lock cap and fits all standard GU10 downlight fittings. Simply twist out the old bulb and twist in the new one. No transformer required — runs directly on 240V mains.
Is this bulb dimmable?Yes — fully dimmable. However, you must use an LED-compatible dimmer switch. Standard halogen or incandescent dimmers may cause flickering or buzzing. For best results, use LED-specific dimmers from brands such as Varilight or Lutron. If you’re unsure, contact us on 01603 381095.
What does 4000K mean?4000K is a cool white colour temperature — bright, crisp, and neutral. It’s more energising than warm white (2700K) but less clinical than daylight (6000K). Ideal for kitchens, bathrooms, offices, and task lighting areas.
What is the difference between a flood and a spot beam?A 36° flood beam spreads light more widely and evenly across a room, reducing harsh shadows. A narrow spot (e.g. 24°) concentrates light in a tighter cone, better suited for accent or feature lighting. This bulb’s flood beam makes it ideal for general ambient and task lighting.
Can this be used in a bathroom?Yes — when installed in an appropriate IP-rated GU10 fitting suitable for the bathroom zone. The bulb itself must be housed in a fitting with the correct IP rating for its location (e.g. IP65 for zones 1 and 2).
Delivery Information
This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.
A focused, energy-efficient LED spotlight at a clearance price. The Bell 6W LED GU10 (SKU: 01506) delivers warm white light with a narrow 36° beam — ideal for downlights, recessed ceiling fittings, track lighting, and accent lighting in kitchens, bathrooms, hallways, and retail displays. Replaces a 50W halogen at a fraction of the running cost.
Key Features
6W LED — replaces 50W halogen; saves up to 88% on energy costs
36° Narrow Beam — focused, directional illumination for accent and task lighting
3000K Warm White — creates a welcoming, comfortable atmosphere
340 Lumens — bright, effective output for a 6W lamp
CRI 85 — excellent colour rendering for true-to-life appearance
30,000 Hour Lifespan — up to 27 years with typical use
Instant Full Brightness — no warm-up delay
Cool Running — safer than hot halogen bulbs
Standard GU10 Fitting — twist-and-lock; fits all standard GU10 downlight fittings
Technical Specification
Brand: Bell
SKU / Part Number: 01506
Barcode (EAN): 5013588051062
Power: 6W LED (replaces 50W halogen)
Cap Type: GU10 (Twist & Lock)
Colour Temperature: 3000K Warm White
Brightness: 340 lumens
Beam Angle: 36° (Narrow spot)
Voltage: 240V
Lifespan: 30,000 hours
CRI: 85
Dimensions: 50mm diameter × 56mm length
Dimmable: No
Frequently Asked Questions
Will this fit my existing GU10 downlight fitting?Yes — this uses a standard GU10 twist-and-lock cap and fits all standard GU10 downlight fittings. Simply twist out the old bulb and twist in the new one.
Is this dimmable?No — this lamp is not dimmable. If you need a dimmable GU10, please contact us on 01603 381095 and we’ll advise on alternatives.
What does 3000K mean?3000K refers to the colour temperature — warm white, similar to a traditional halogen or incandescent bulb. It creates a cosy, welcoming atmosphere and is ideal for living spaces, kitchens, and bathrooms.
What is CRI 85?CRI (Colour Rendering Index) measures how accurately a light source renders colours compared to natural daylight. A CRI of 85 is considered excellent — colours appear natural and true-to-life under this lamp.
Delivery Information
This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.
A classic GLS LED bulb with full dimming control. The Bell 9W LED Dimmable GLS Bulb (SKU: 05617) delivers warm, comfortable illumination with a pearl opal finish that diffuses light beautifully — perfect for living rooms, bedrooms, dining areas, hallways, and any ES/E27 Edison screw fitting. Replaces a 60W incandescent at a fraction of the running cost.
Key Features
9W LED — replaces 60W incandescent; saves up to 85% on energy costs
Fully Dimmable — smooth dimming control; compatible with most LED-compatible dimmer switches
Pearl Opal Finish — soft, diffused, glare-free illumination
2700K Warm White — cosy, welcoming, traditional incandescent-style warmth
810 Lumens — bright output; excellent for general room lighting
ES/E27 Edison Screw Cap — standard screw fitting; direct drop-in replacement
Long Lifespan — significantly outlasts traditional incandescent bulbs
Instant Full Brightness — no warm-up delay
Technical Specification
Brand: Bell Lighting
SKU / Part Number: 05617
Power: 9W LED (replaces 60W incandescent)
Cap Type: ES / E27 (Edison Screw)
Bulb Shape: GLS (General Lamp Service)
Colour Temperature: 2700K Warm White
Brightness: 810 lumens
Finish: Pearl Opal
Dimmable: Yes
Voltage: 240V AC
Frequently Asked Questions
Will this fit my light fitting?This bulb uses an ES/E27 Edison screw cap — a large screw fitting common in many UK table lamps, floor lamps, pendant fittings, and decorative fixtures. Check your existing bulb or lamp holder before ordering. It is not compatible with BC/B22 (bayonet) or SES/E14 (small screw) fittings.
Is this bulb dimmable?Yes — fully dimmable. For best results, use an LED-compatible dimmer switch. Standard halogen dimmers may cause flickering. If you’re unsure, contact us on 01603 381095.
What does 2700K mean?2700K is a warm white colour temperature, very close to traditional incandescent bulbs. It creates a cosy, welcoming atmosphere and is ideal for living rooms, bedrooms, hallways, and dining areas.
What is a GLS bulb?GLS (General Lamp Service) is the classic pear-shaped bulb — the traditional shape most people picture when they think of a light bulb. It fits standard ES/E27 pendant and lamp fittings and is one of the most common bulb shapes worldwide.
Can I order if the item shows as out of stock?Yes — we can fulfil this product even when stock shows as zero. Place your order as normal and we’ll confirm lead time with you.
Delivery Information
This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.
A compact, energy-efficient LED golf ball bulb at a clearance price. The Bell 4W LED Golf Ball Bulb (SKU: 01502) delivers warm, diffused light in a classic 45mm round form — perfect for chandeliers, wall sconces, pendant lights, bedside lamps, and decorative fittings with BC/B22 bayonet cap sockets. The opal finish softens the light beautifully, eliminating glare and visible LED chips.
Key Features
4W LED — replaces 40W incandescent; saves up to 90% on energy costs
Opal Finish — soft, diffused, glare-free illumination; ideal for exposed fittings
2700K Warm White — cosy, traditional incandescent-style warmth
250 Lumens — suitable for accent and decorative lighting
45mm Golf Ball (G45) — compact round shape; fits smaller decorative fittings
25,000 Hour Lifespan — up to 22 years with typical use
Instant Full Brightness — no warm-up delay
BC/B22 Bayonet Cap — standard UK fitting; easy drop-in replacement
Technical Specification
Brand: Bell Lighting
SKU / Part Number: 01502
Barcode (EAN): 5013588051024
Power: 4W LED (replaces 40W incandescent)
Cap Type: BC / B22 (Bayonet Cap)
Bulb Shape: Golf Ball / G45 (45mm diameter)
Colour Temperature: 2700K Warm White
Brightness: 250 lumens
Finish: Opal (frosted)
Dimmable: No
Lifespan: 25,000 hours
Switching Cycles: 15,000+
Voltage: 240V AC
Energy Rating: A+
Frequently Asked Questions
Will this fit my light fitting?This bulb uses a BC/B22 bayonet cap — the standard large bayonet fitting used in most UK ceiling pendants and decorative fittings. Check your existing bulb or lamp holder before ordering. It is not compatible with SBC/B15 (small bayonet) or ES/E27 (screw) fittings.
Is this bulb dimmable?No — this bulb is non-dimmable and must not be used with dimmer switches. Using a non-dimmable LED with a dimmer can cause flickering, buzzing, or premature failure. For dimmable applications, please contact us on 01603 381095.
What does opal finish mean?Opal (frosted) glass diffuses light evenly in all directions, hiding the LED chips and creating soft, comfortable illumination without harsh glare. It’s ideal for eye-level fittings, bedside lamps, and any fixture where you might look directly at the bulb.
What does 2700K mean?2700K is a warm white colour temperature, very close to traditional incandescent bulbs. It creates a cosy, welcoming atmosphere and is ideal for living rooms, bedrooms, hallways, and decorative fittings.
Delivery Information
This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.
Browse our comprehensive range of electrical products for bathrooms and beyond, including light switches, sockets, earth straps and essential electrical accessories. Quality electrical fittings designed for safety and durability.
