Description
⚡ Professional 24V DC LED Driver with Integrated Sensor Port
Powers all 24V LED strips. Plug-and-play sensor connection — no separate sensor wiring required. Available in 8W, 15W, 30W, and 60W. Select your wattage from the options above.
⚠️ Sensors sold separately and must be ordered at the same time.
The SycamoreLED 24V Pulse LED Driver is a compact, mains-powered LED driver with a built-in sensor port that eliminates the need for separate sensor wiring. Plug in a compatible Pulse touch, door, or motion sensor directly into the driver — no additional wiring, no junction boxes. Available in four output options to suit installations from a single cabinet to a full commercial fit-out. Dimmable output when paired with a touch sensor and dimmable 24V LED strip.
Key Features
-
Integrated Sensor Port — dedicated plug-and-play port for Pulse touch, door, and motion sensors; no separate sensor wiring required
-
Four Output Options — 8W, 15W, 30W, or 60W; select the wattage to suit your LED strip length and load
-
24V DC Output — compatible with all 24V LED strips including Modex Zenith, Exa, and Intra ranges
-
Dimmable — touch-and-hold dimming when used with a Pulse touch sensor and dimmable LED strip
-
Compact Design — integrated connector ports keep wiring neat; suitable for concealed installation in cabinets and furniture
-
Mains Powered — 240V AC input; standard UK electrical connection
Choosing the Right Wattage
Check the watts-per-metre rating of your LED strip, multiply by the total strip length, then add 20% headroom:
| 8W Driver (SY2499-8) |
Up to ~1m of 7.5W/m strip — small under-cabinet runs, single short strips |
| 15W Driver (SY2499-15) |
Up to ~2m of 7.5W/m strip — kitchen cabinets, bathroom furniture, shelving |
| 30W Driver (SY2499-30) |
Up to ~4m of 7.5W/m strip — cove lighting, longer runs, multiple strips |
| 60W Driver (SY2499-60) |
Up to ~8m of 7.5W/m strip — large installations, commercial projects |
Compatible Pulse Sensors (Sold Separately)
Plug directly into the integrated sensor port — no additional wiring:
-
Touch Sensor — touch on/off; touch-and-hold to dim; ideal for under-cabinet and display lighting
-
Single Door Sensor — automatic on/off when door opens or closes; 1–3cm detection range; ideal for single-door cabinets and wardrobes
-
Double Door Sensor — as above for double-door cabinets; 1–3cm detection range
-
Motion Sensor (PIR) — hands-free activation; 1–3m range, 90° angle, 30-second delay; ideal for hallways and stairs
Technical Specification
| Brand |
SycamoreLED — Pulse Series |
| Output Voltage |
24V DC |
| Input Voltage |
240V AC (mains) |
| Available Outputs |
8W | 15W | 30W | 60W |
| Sensor Port |
Integrated — Pulse sensors compatible |
| Dimmable |
Yes (with compatible dimmable LED strip and touch sensor) |
| Compatible LED Strips |
All 24V LED strips (Modex Zenith, Exa, Intra and others) |
| SKU (8W) |
SY2499-8 |
| SKU (15W) |
SY2499-15 |
| SKU (30W) |
SY2499-30 |
| SKU (60W) |
SY2499-60 |
Complete Your LED Lighting System
Frequently Asked Questions
What wattage driver do I need?
Multiply your LED strip’s watts-per-metre rating by the total strip length in metres, then add 20% headroom. For example: a 7.5W/m strip at 2m = 15W total — choose the 15W or 30W driver. Always size up rather than down.
Do the sensors come included?
No — sensors are sold separately and must be ordered at the same time as the driver. Compatible Pulse sensors (touch, single door, double door, and motion/PIR) are available in the Modex accessories ranges.
Is this driver dimmable?
Yes — when used with a compatible Pulse touch sensor and a dimmable 24V LED strip. Touch and hold the sensor to adjust brightness. Not all LED strips are dimmable — check your strip specification before ordering.
Which LED strips is this driver compatible with?
This driver is compatible with all 24V LED strips, including the SycamoreLED Modex Zenith, Exa, and Intra ranges. It is not compatible with 12V LED strips.
Can I order if the item shows as out of stock?
Yes — we can fulfil this product even when stock shows as zero. Place your order as normal and we’ll confirm lead time with you, or call us on 01603 381095.
