Internal collection for managing postage rates for small products.
Small Items - Postage
-
Bell 4W LED Golf Ball Bulb | BC B22 | 45mm Opal | 2700K Warm White | Clearance
A compact, energy-efficient LED golf ball bulb at a clearance price. The Bell 4W LED Golf Ball Bulb (SKU: 01502) delivers warm, diffused light in a classic 45mm round form — perfect for chandeliers, wall sconces, pendant lights, bedside lamps, and decorative fittings with BC/B22 bayonet cap sockets. The opal finish softens the light beautifully, eliminating glare and visible LED chips. Key Features 4W LED — replaces 40W incandescent; saves up to 90% on energy costs Opal Finish — soft, diffused, glare-free illumination; ideal for exposed fittings 2700K Warm White — cosy, traditional incandescent-style warmth 250 Lumens — suitable for accent and decorative lighting 45mm Golf Ball (G45) — compact round shape; fits smaller decorative fittings 25,000 Hour Lifespan — up to 22 years with typical use Instant Full Brightness — no warm-up delay BC/B22 Bayonet Cap — standard UK fitting; easy drop-in replacement Technical Specification Brand: Bell Lighting SKU / Part Number: 01502 Barcode (EAN): 5013588051024 Power: 4W LED (replaces 40W incandescent) Cap Type: BC / B22 (Bayonet Cap) Bulb Shape: Golf Ball / G45 (45mm diameter) Colour Temperature: 2700K Warm White Brightness: 250 lumens Finish: Opal (frosted) Dimmable: No Lifespan: 25,000 hours Switching Cycles: 15,000+ Voltage: 240V AC Energy Rating: A+ Frequently Asked Questions Will this fit my light fitting?This bulb uses a BC/B22 bayonet cap — the standard large bayonet fitting used in most UK ceiling pendants and decorative fittings. Check your existing bulb or lamp holder before ordering. It is not compatible with SBC/B15 (small bayonet) or ES/E27 (screw) fittings. Is this bulb dimmable?No — this bulb is non-dimmable and must not be used with dimmer switches. Using a non-dimmable LED with a dimmer can cause flickering, buzzing, or premature failure. For dimmable applications, please contact us on 01603 381095. What does opal finish mean?Opal (frosted) glass diffuses light evenly in all directions, hiding the LED chips and creating soft, comfortable illumination without harsh glare. It’s ideal for eye-level fittings, bedside lamps, and any fixture where you might look directly at the bulb. What does 2700K mean?2700K is a warm white colour temperature, very close to traditional incandescent bulbs. It creates a cosy, welcoming atmosphere and is ideal for living rooms, bedrooms, hallways, and decorative fittings. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.
£2.00
-
Bell 9W LED Dimmable GLS Bulb | ES E27 | 2700K Warm White | Pearl Opal | 60W Replacement
A classic GLS LED bulb with full dimming control. The Bell 9W LED Dimmable GLS Bulb (SKU: 05617) delivers warm, comfortable illumination with a pearl opal finish that diffuses light beautifully — perfect for living rooms, bedrooms, dining areas, hallways, and any ES/E27 Edison screw fitting. Replaces a 60W incandescent at a fraction of the running cost. Key Features 9W LED — replaces 60W incandescent; saves up to 85% on energy costs Fully Dimmable — smooth dimming control; compatible with most LED-compatible dimmer switches Pearl Opal Finish — soft, diffused, glare-free illumination 2700K Warm White — cosy, welcoming, traditional incandescent-style warmth 810 Lumens — bright output; excellent for general room lighting ES/E27 Edison Screw Cap — standard screw fitting; direct drop-in replacement Long Lifespan — significantly outlasts traditional incandescent bulbs Instant Full Brightness — no warm-up delay Technical Specification Brand: Bell Lighting SKU / Part Number: 05617 Power: 9W LED (replaces 60W incandescent) Cap Type: ES / E27 (Edison Screw) Bulb Shape: GLS (General Lamp Service) Colour Temperature: 2700K Warm White Brightness: 810 lumens Finish: Pearl Opal Dimmable: Yes Voltage: 240V AC Frequently Asked Questions Will this fit my light fitting?This bulb uses an ES/E27 Edison screw cap — a large screw fitting common in many UK table lamps, floor lamps, pendant fittings, and decorative fixtures. Check your existing bulb or lamp holder before ordering. It is not compatible with BC/B22 (bayonet) or SES/E14 (small screw) fittings. Is this bulb dimmable?Yes — fully dimmable. For best results, use an LED-compatible dimmer switch. Standard halogen dimmers may cause flickering. If you’re unsure, contact us on 01603 381095. What does 2700K mean?2700K is a warm white colour temperature, very close to traditional incandescent bulbs. It creates a cosy, welcoming atmosphere and is ideal for living rooms, bedrooms, hallways, and dining areas. What is a GLS bulb?GLS (General Lamp Service) is the classic pear-shaped bulb — the traditional shape most people picture when they think of a light bulb. It fits standard ES/E27 pendant and lamp fittings and is one of the most common bulb shapes worldwide. Can I order if the item shows as out of stock?Yes — we can fulfil this product even when stock shows as zero. Place your order as normal and we’ll confirm lead time with you. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.
£2.00
-
McAlpine Scale Defender Refill Pack | 2 x Replacement Cartridges | 40,000L Each
The McAlpine Scale Defender Refill Pack contains 2 replacement polyphosphate cartridges for use with your existing McAlpine Scale Defender unit. Each cartridge treats up to 40,000 litres, providing continued limescale protection for your boiler, pipes, appliances, and entire home plumbing system. What's Included 2 x Replacement Cartridges - Food-grade polyphosphate dosing cartridges Each cartridge treats up to 40,000 litres Total capacity: 80,000 litres (both cartridges combined) Why Replace Your Cartridge? The polyphosphate cartridge is the active component that protects your home from limescale. As water passes through, the cartridge gradually dissolves, treating your water supply. When the cartridge is depleted, it needs replacing to maintain continuous limescale protection. Signs your cartridge needs replacing: Cartridge appears significantly smaller or depleted Limescale starting to reappear on taps or appliances Approximately 40,000 litres of water has passed through (varies by household usage) Reduced water treatment effectiveness Key Features 2 cartridges included - Long-term supply for continued protection 40,000 litres per cartridge - Extended treatment capacity Food-grade polyphosphate - Safe for drinking water (WHO & FAO approved) Easy DIY replacement - Simple screw-in installation, no plumber needed Compatible with all Scale Defender units Maintains system efficiency - Keeps your heating system running optimally Protects entire home - Boiler, pipes, radiators, taps, and appliances Saves money - Prevents costly limescale damage and reduces energy bills Technical Specifications Brand: McAlpine Product Type: Scale Defender Replacement Cartridges Quantity: 2 cartridges Cartridge Capacity: Up to 40,000 litres each Total Capacity: 80,000 litres (both cartridges) Weight: 0.41kg (pack of 2) Material: Food-grade polyphosphate Standards: BS EN 1212, EC regulations EN 1212 Compatibility: All McAlpine Scale Defender units SKU: K33101 Safety: WHO & FAO approved for drinking water How to Replace Your Cartridge Replacing your Scale Defender cartridge is quick and easy: Turn off your water supply Unscrew the Scale Defender housing Remove the old cartridge Insert the new cartridge Screw the housing back together Turn the water supply back on Check for leaks No plumber required - most homeowners can replace the cartridge themselves in just a few minutes. Why Continue Using Scale Defender? Limescale affects your pipework, boiler, radiators, taps, appliances, and fittings and can lead to increased repairs or early replacement costs. A 1mm layer of limescale in your boiler can amount to an extra £150 to £200 in household bills every year according to the Carbon Trust. By maintaining your Scale Defender with regular cartridge replacements, you continue to: Reduce energy bills by maintaining boiler efficiency Extend the life of your boiler and heating system Protect washing machines, dishwashers, and other appliances Prevent costly limescale-related repairs Maintain better water flow and pressure Keep taps and fixtures looking cleaner What is Polyphosphate? Polyphosphate is a food-grade (consumable) product approved by the World Health Organization and Food and Agricultural Organization. It is widely used today in the food processing industry for cheese, meat, wine, and other products. McAlpine Scale Defender technology is a completely safe way to treat water in the home and is safe for human consumption according to WHO and FAO recommendations and in accordance with international norms for drinking water to EC regulations, standard EN 1212 and British Standard BS EN 1212. Perfect For Existing Scale Defender unit owners Replacing depleted cartridges Maintaining continuous limescale protection Hard water areas Homes with combination boilers Properties with expensive heating systems Landlords maintaining rental properties Long-term system maintenance Note: This is a refill pack containing replacement cartridges only. The Scale Defender unit is required (sold separately as starter kit K33100).
£149.00 £98.00
-
McAlpine Scale Defender Starter Kit | Limescale Protection System | 40,000L Capacity
The McAlpine Scale Defender Starter Kit is a comprehensive limescale protection system that tackles limescale while protecting your home and your pocket. This small but powerful unit is affordable and safely seals and removes calcium, protecting your boiler, drinking water, appliances, and entire home plumbing system. What's Included in the Starter Kit The complete starter kit includes: Scale Defender unit - Main housing with built-in prefilter Dosing cartridge - Food-grade polyphosphate cartridge (treats up to 40,000 litres) 15mm connectors - For standard 15mm copper pipe installations 22mm connectors - For standard 22mm copper pipe installations Why You Need Limescale Protection Limescale affects your pipework, boiler, radiators, taps, appliances, and fittings and can lead to increased repairs or early replacement costs. A 1mm layer of limescale in your boiler can amount to an extra £150 to £200 in household bills every year according to the Carbon Trust. McAlpine Scale Defender can save hundreds of pounds as it keeps your heating system more efficient and helps prolong the life of pipes, fittings, and appliances. Key Features Treats up to 40,000 litres - Long-lasting cartridge capacity Protects entire home - Boiler, pipes, radiators, taps, and appliances Saves money - Reduces energy bills and prevents costly repairs Food-grade polyphosphate - Safe for drinking water (WHO & FAO approved) Easy-clean prefilter - No replacement needed, just rinse clean 45-60 minute installation - Quick professional fitting No ongoing maintenance - Just replace cartridge when needed 15mm and 22mm fittings included - Fits standard UK plumbing High flow rate - Up to 3000 litres/hour Wide pressure range - Works from 0.5 to 10 bar Technical Specifications Brand: McAlpine Product Type: Limescale Protection System Connections: ¾" Male BSP with 15mm & 22mm fittings Weight: 0.97kg Working Pressure: 0.5 – 10 Bar Test Pressure: 25 Bar Temperature Range: 1°C – 40°C Water Flow Rate: Maximum 3000 litres/hour Pressure Loss: Maximum ± 0.3 Bar Cartridge Capacity: Up to 40,000 litres Prefilter: Easy clean (no replacement needed) Standards: BS EN 1212, EC regulations EN 1212 SKU: K33100 How It Works The Scale Defender uses food-grade polyphosphate to treat your water supply. As water passes through the unit, the polyphosphate creates a protective coating on pipes and heating elements, preventing limescale from forming and gradually removing existing scale deposits. This keeps your system running efficiently and protects all downstream appliances and fittings. What is Polyphosphate? Polyphosphate is a food-grade (consumable) product approved by the World Health Organization and Food and Agricultural Organization. It is widely used today in the food processing industry for cheese, meat, wine, and other products. McAlpine Scale Defender technology is a completely safe way to treat water in the home and is safe for human consumption according to WHO and FAO recommendations and in accordance with international norms for drinking water to EC regulations, standard EN 1212 and British Standard BS EN 1212. Easy to Fit McAlpine Scale Defender should be fitted by a qualified plumber, but at between 45–60 minutes to fit, it should only be an hour's call out. The kit includes both 15mm and 22mm connectors for compatibility with standard UK copper pipe installations. Thereafter, it is easy to replace the cartridges, and the system requires no ongoing maintenance. Perfect For Hard water areas with limescale problems Protecting boilers and heating systems Extending appliance lifespan (washing machines, dishwashers, kettles) Reducing energy bills and improving efficiency New build installations Renovation projects Homes with expensive boiler systems Properties with combination boilers Landlords protecting rental property investments Cost Savings By preventing limescale build-up, the Scale Defender helps you save money in multiple ways: Reduced energy bills (limescale reduces boiler efficiency) Extended boiler lifespan (prevents scale damage) Fewer appliance repairs and replacements Reduced plumbing maintenance costs Better water flow and pressure Investment protection: At a fraction of the cost of boiler repairs or replacement, the Scale Defender pays for itself through energy savings and extended equipment life.
£329.00 £215.00
-
KeyPlumb 15mm Electrolytic Scale Reducer | WRAS Approved | No Chemicals | KPESR15
Protect your entire plumbing system from limescale damage with the KeyPlumb 15mm Electrolytic Scale Reducer (KPESR15). WRAS-approved and completely passive — no chemicals, no filters, no electricity, no ongoing costs. The 15mm compression fitting integrates directly into your cold water rising main, using proven electrolytic technology to prevent scale build-up at the source. Ideal for hard water areas across the UK. Key Features WRAS Approved — certified for use in UK potable (drinking) water systems No Chemicals Required — no salts, additives, or chemical treatments Zero Maintenance — no filters to replace, no ongoing costs; passive system No Power Required — works from water flow alone Whole-House Protection — install on rising main to protect boilers, appliances, and pipework 15mm Compression Fitting — straightforward installation into standard pipework Preserves Water Quality — maintains natural mineral content; no brine discharge Ideal for Hard Water Areas — recommended where calcium carbonate exceeds 200ppm Technical Specification Brand: KeyPlumb SKU / Model: KPESR15 Barcode (EAN): 5056277502186 Size: 15mm compression fitting Technology: Electrolytic scale reduction Certification: WRAS approved Connection Type: Compression fittings (both ends) Maximum Working Pressure: 10 bar Operating Temperature: 5°C to 65°C Power: None required (passive system) Maintenance: None required HS Code: 842121 What’s Included KeyPlumb 15mm electrolytic scale reducer unit 15mm compression fittings (both ends) Installation instructions WRAS certification documentation Frequently Asked Questions How does an electrolytic scale reducer work?As water passes through the unit, the electrolytic process alters the structure of calcium and magnesium minerals so they remain suspended in the water rather than forming hard scale deposits on pipes, heating elements, and appliances. No chemicals or power are required — the reaction is triggered by water flow alone. Where should I install it?Install on the cold water rising main immediately after the stopcock for whole-house protection. This ensures all water entering the property is treated before reaching boilers, appliances, and hot water systems. Professional installation by a qualified plumber is recommended. Is this suitable for drinking water systems?Yes — WRAS approval confirms this unit is safe for use in potable (drinking) water systems and complies with the Water Supply (Water Fittings) Regulations. It does not add chemicals or alter the taste of your water. How is this different from a water softener?Traditional water softeners require regular salt top-ups, produce brine waste, and remove beneficial minerals from the water. This electrolytic unit requires no salt, produces no waste water, maintains natural mineral content, and has no running costs. How long does it last?The electrolytic elements are designed for long-term passive performance, typically 10+ years in normal use, with no servicing or replacement parts required. Can I order if the item shows as out of stock?Yes — we can fulfil this product even when stock shows as zero. Place your order as normal and we’ll confirm lead time with you. For urgent enquiries, call us on 01603 381095. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.
£22.00 £9.30
-
McAlpine E10 Shallow Basin Bottle Trap | 1¼" Outlet | 50mm Seal | White
The McAlpine E10 is a shallow basin bottle trap designed for installations where space beneath the basin is limited. Its compact profile makes it ideal for wall-hung basins, vanity units with restricted clearance, and cloakroom sinks — while still providing a reliable 50mm water seal to prevent sewer gases and odours from entering the bathroom. Key Features Shallow compact design — fits where standard bottle traps cannot; ideal for wall-hung basins and fitted vanity units 50mm water seal — effective odour barrier; maintains seal even during periods of non-use 1¼" (32mm) multifit compression outlet — compatible with plastic, copper, and lead waste pipes White polypropylene construction — corrosion and chemical resistant; smooth internal surfaces for optimal flow BS EN 274-1:2002 compliant — meets British and European performance standards Precision-moulded threads — prevent cross-threading during installation Technical Specification Model E10 Type Shallow basin bottle trap Water Seal 50mm Outlet Size 1¼" (32mm) Outlet Type Multifit compression Material Polypropylene Colour White Pipe Compatibility Plastic, copper, lead Standard BS EN 274-1:2002 Weight 0.15kg Brand McAlpine You May Also Need Basin Wastes — Click-clack, pop-up, and slotted basin wastes Basins — Browse our full basin range All Wastes & Drainage — Bath wastes, shower wastes, and traps Frequently Asked Questions What is the difference between a shallow and standard bottle trap? A standard bottle trap has a deeper body to accommodate the water seal. A shallow bottle trap achieves the same 50mm water seal in a more compact housing — making it suitable for installations where there is limited clearance beneath the basin, such as wall-hung basins or fitted vanity units with a high base. Can I order if the item shows as out of stock? Yes — this product can be ordered even when showing as out of stock, and we'll fulfil your order as soon as stock is available. If you need a specific delivery timeframe, please contact us at customerservice@bubblegumbathrooms.co.uk before ordering.
£16.95 £6.00
-
McAlpine Q10 19mm Shallow Seal Bath Trap | Chrome Multifit Outlet
The McAlpine Q10 is a 19mm shallow seal bath trap with a chrome-plated multifit compression outlet. Designed for installations where a standard 75mm seal depth isn't achievable — such as low-clearance baths — it maintains an effective water seal to prevent drain odours while fitting neatly into tight spaces. Key Features 19mm shallow water seal — ideal where full-depth traps won't fit beneath the bath Universal multifit compression outlet — compatible with 32mm, 36mm, and 40mm plastic, copper, and lead waste pipes Chrome-plated finish — neat appearance where the trap may be partially visible Polypropylene body — lightweight, corrosion-resistant, and long-lasting Hand-tight installation — no tools required; leak-free seals designed for fibreglass and acrylic baths Compatible with McAlpine bath wastes — integrates seamlessly with McAlpine waste systems Technical Specification Model: Q10 Water seal depth: 19mm (shallow seal) Body material: Polypropylene with chrome finish Outlet type: Multifit compression Outlet compatibility: 32mm, 36mm, 40mm waste pipes (plastic, copper, lead) Suitable for: Fibreglass, acrylic, and steel baths Country of Origin: United Kingdom Barcode: 5036484002587 SKU: Q10 More McAlpine Traps McAlpine E10 Shallow Basin Bottle Trap | 1¼" Outlet | 50mm Seal McAlpine AA10 Resealing Bottle Trap | 75mm Seal | Self-Ventilating McAlpine ST90CPB-S-70 Shallow Shower Trap | 90mm | 70mm Height McAlpine ST90CPB-S-53 Shallow Shower Trap | 90mm | 53mm Height McAlpine ST90CB10-70 Shallow Shower Trap | 90mm | 70mm Height Frequently Asked Questions What is a shallow seal trap? A shallow seal trap retains a smaller water seal depth (19mm in this case) compared to a standard trap (75mm). It is used where there is limited space beneath the bath for a full-depth trap, such as with low-profile or freestanding baths with restricted underside clearance. Will this fit my bath waste? The Q10 uses a multifit compression outlet compatible with 32mm, 36mm, and 40mm waste pipes. It is designed to work with McAlpine bath wastes and most standard bath waste fittings. Check your existing waste outlet size before ordering. Is this suitable for acrylic baths? Yes — the Q10's seals are specifically designed to create a leak-free connection with fibreglass and acrylic bath surfaces, as well as steel baths. Can I order if the item shows as out of stock? Yes — most items can still be ordered when showing as out of stock. Lead times may vary. Contact us at customerservice@bubblegumbathrooms.co.uk or call 01603 381095 before ordering if you need a specific delivery date.
£16.84 £6.00
-
McAlpine WC-CON8 90° Bent Rigid WC Pan Connector – 97-107mm x 110mm
The McAlpine WC-CON8 is a 90° bent rigid WC pan connector with an adjustable length inlet and double seal on the pan connection — delivering a reliable, leak-free fit with all standard WC pan spigots. The 110mm outlet connects to both PVC-U and cast iron soil pipe, making it suitable for the vast majority of UK domestic installations. Manufactured in durable polypropylene and compliant with BS 5627:1984 and DIN 1389:2015-12. Key Features 90° bend — ideal for pans set at right angles to the soil pipe Adjustable length inlet for flexible positioning 97–107mm inlet suits all standard WC pan spigots Double seal on pan connection for a secure, leak-free fit 4″/110mm outlet — available with finned end (PVC-U/cast iron internal diameter) or plain end (110mm soil/underground pipe fittings) Durable polypropylene construction Complies with BS 5627:1984 and DIN 1389:2015-12 Technical Specification SKU: WC-CON8 Barcode: 503484006097 Inlet: 97–107mm (adjustable) Outlet: 4″/110mm Angle: 90° Material: Polypropylene Standards: BS 5627:1984 / DIN 1389:2015-12 Weight: 0.2kg Brand: McAlpine More McAlpine WC Pan Connectors Need a different angle, length, or flexibility? Browse the full McAlpine WC connector range: McAlpine WC-CON2 Straight Adjustable WC Pan Connector – 97-107mm x 110mm McAlpine WC-CON8E 90° Extended Inlet Rigid WC Pan Connector – 97-107mm x 110mm McAlpine WC-CONQ 90° Space Saving Rigid WC Pan Connector – 97-107mm x 110mm McAlpine F26R Straight Flexible WC Pan Connector 410mm – 97-107mm x 110mm McAlpine F33R Straight Flexible WC Pan Connector 850mm – 97-107mm x 110mm Frequently Asked Questions What is the difference between the WC-CON8 and the WC-CON8E? The WC-CON8E has an extended inlet for additional reach between the pan spigot and the soil pipe. If you need extra length, choose the WC-CON8E. For a standard 90° connection, the WC-CON8 is the right choice. What does the double seal do? The double seal on the pan connection creates a more secure, leak-free joint between the connector and the WC pan spigot — reducing the risk of seepage even with minor misalignment during installation. What pan spigot sizes does this fit? The adjustable inlet fits all standard WC pan spigots in the 97–107mm range, covering the vast majority of UK toilet pans. What soil pipe does the outlet connect to? The 110mm outlet is available with a finned end (for 4″/110mm PVC-U and cast iron soil pipe internal diameters) or a plain end (for 110mm soil or underground pipe fittings). Please confirm which outlet type you require before ordering. Can I order if the item shows as out of stock? Yes — we can order this product for you even if it shows as out of stock. Lead times may vary; please contact us at customerservice@bubblegumbathrooms.co.uk for availability.
£17.14 £8.00
-
McAlpine WC-CON2 Straight Adjustable Rigid WC Pan Connector – 97-107mm x 110mm
The McAlpine WC-CON2 is a straight adjustable rigid WC pan connector — the go-to choice for standard in-line installations where the pan spigot and soil pipe are directly aligned. The adjustable 97–107mm inlet suits all standard WC pan spigots, and the 110mm outlet is compatible with both PVC-U and cast iron soil pipe. Also available with a 3½″/90mm finned outlet for older soil pipe systems. Manufactured in durable polypropylene and compliant with BS 5627:1984 and DIN 1389:2015-12. Key Features Straight rigid connector — ideal for direct in-line pan-to-soil-pipe installations Adjustable length for flexible positioning 97–107mm inlet suits all standard WC pan spigots 110mm outlet — available with finned end (4″/110mm PVC-U/cast iron) or plain end (110mm soil/underground pipe fittings) Also available with 3½″/90mm finned outlet for older soil pipe systems Durable polypropylene construction Complies with BS 5627:1984 and DIN 1389:2015-12 Technical Specification SKU: WC-CON2 Barcode: 5034684005977 Inlet: 97–107mm (adjustable) Outlet: 110mm (finned or plain end) Type: Straight rigid Material: Polypropylene Standards: BS 5627:1984 / DIN 1389:2015-12 Weight: 0.15kg Brand: McAlpine More McAlpine WC Pan Connectors Need a bend, extra reach, or a flexible connector? Browse the full McAlpine WC connector range: McAlpine WC-CON8 90° Bent Rigid WC Pan Connector – 97-107mm x 110mm McAlpine WC-CON8E 90° Extended Inlet Rigid WC Pan Connector – 97-107mm x 110mm McAlpine WC-CONQ 90° Space Saving Rigid WC Pan Connector – 97-107mm x 110mm McAlpine F26R Straight Flexible WC Pan Connector 410mm – 97-107mm x 110mm McAlpine F33R Straight Flexible WC Pan Connector 850mm – 97-107mm x 110mm Frequently Asked Questions When should I use a straight connector rather than a 90° bent connector? Use a straight connector like the WC-CON2 when the WC pan spigot and the soil pipe entry point are directly in line — i.e. the pan faces straight into the wall. If the soil pipe is offset to the side, you’ll need a 90° connector such as the WC-CON8 or WC-CON8E. What pan spigot sizes does this fit? The adjustable inlet fits all standard WC pan spigots in the 97–107mm range, covering the vast majority of UK toilet pans. What soil pipe does the outlet connect to? The standard 110mm outlet is available with a finned end (for 4″/110mm PVC-U and cast iron soil pipe internal diameters) or a plain end (for 110mm soil or underground pipe fittings). A 3½″/90mm finned outlet version is also available for older soil pipe systems. Is this a rigid or flexible connector? This is a rigid connector. If you need a flexible connector for awkward or offset installations, see our McAlpine F26R or McAlpine F33R flexible connectors. Can I order if the item shows as out of stock? Yes — we can order this product for you even if it shows as out of stock. Lead times may vary; please contact us at customerservice@bubblegumbathrooms.co.uk for availability.
£14.39 £7.00
-
McAlpine WC-CON8E 90° Extended Inlet Rigid WC Pan Connector – 97-107mm x 110mm
The McAlpine WC-CON8E is a 90° rigid WC pan connector with an extended adjustable inlet — designed for installations where extra reach is needed between the pan spigot and the soil pipe. The adjustable 97–107mm inlet suits all standard WC pan spigots, and the 110mm outlet connects to both PVC-U and cast iron soil pipe. Manufactured in durable polypropylene and compliant with BS 5627:1984 and DIN 1389:2015-12. Key Features 90° bend with extended inlet for greater reach Adjustable length for flexible installation 97–107mm inlet suits all standard WC pan spigots 4″/110mm outlet — fits inside diameter of PVC-U and cast iron soil pipe Durable polypropylene construction Complies with BS 5627:1984 and DIN 1389:2015-12 Technical Specification SKU: WC-CON8E Barcode: 5036484007537 Inlet: 97–107mm (adjustable) Outlet: 4″/110mm Angle: 90° Material: Polypropylene Standards: BS 5627:1984 / DIN 1389:2015-12 Weight: 0.15kg Brand: McAlpine More McAlpine WC Pan Connectors Need a different angle, length, or flexibility? Browse the full McAlpine WC connector range: McAlpine WC-CON2 Straight Adjustable WC Pan Connector – 97-107mm x 110mm McAlpine WC-CON8 90° Bent Pan Connector – 97-107mm x 110mm McAlpine WC-CONQ 90° Space Saving Rigid WC Pan Connector – 97-107mm x 110mm McAlpine F26R Straight Flexible WC Pan Connector 410mm – 97-107mm x 110mm McAlpine F33R Straight Flexible WC Pan Connector 850mm – 97-107mm x 110mm Frequently Asked Questions What makes the WC-CON8E different from the standard WC-CON8? The WC-CON8E has an extended inlet, giving additional reach between the pan spigot and the soil pipe entry point. This makes it ideal where the pan is positioned further from the wall or where standard connectors fall short. What pan spigot sizes does this fit? The adjustable inlet fits all standard WC pan spigots in the 97–107mm range, covering the vast majority of UK toilet pans. What soil pipe does the outlet connect to? The 110mm outlet fits the inside diameter of 4″/110mm PVC-U and cast iron soil pipe — the standard soil pipe size used in UK domestic installations. Is this a rigid or flexible connector? This is a rigid connector. If you need a flexible connector for awkward or offset installations, see our McAlpine F26R or McAlpine F33R flexible connectors. Can I order if the item shows as out of stock? Yes — we can order this product for you even if it shows as out of stock. Lead times may vary; please contact us at customerservice@bubblegumbathrooms.co.uk for availability.
£16.95 £8.00
-
KeyPlumb 15mm Flat Face Compression Isolation Valve – Chrome | ½" BSP Male Thread
Not all isolation valves are the same — and this one is specified for a reason. The KeyPlumb 15mm Flat Face Compression x ½" BSP Isolation Valve is the correct valve for installations where a basin mono tap with a flexi tail connects to a 15mm copper supply pipe. The flat face compression end grips the pipe without an olive, while the ½" male BSP thread connects directly to the flexi tail. A flathead screwdriver closes it off in a quarter-turn. Chrome-plated brass, neat, and built to last behind a basin pedestal for years. Key Features Flat Face Compression Inlet — 15mm flat face compression fitting; connects to copper pipe without a traditional olive; provides a secure, leak-proof seal ½" BSP Male Thread Outlet — standard ½" male BSP thread; connects directly to flexi tails on basin mono taps, kitchen taps, and similar fixtures Screwdriver Slot Operation — quarter-turn flathead screwdriver; tamper-resistant and compact for tight under-basin spaces Chrome-Plated Brass Body — corrosion-resistant construction with a polished chrome finish; professional appearance for exposed installations Isolates Individual Fixtures — allows a tap or fixture to be isolated for maintenance without shutting off the water supply to the whole property Hot & Cold Water — suitable for both hot and cold water supply lines 1-Year Manufacturer's Guarantee — backed by KeyPlumb warranty When to Use This Valve This valve is specifically designed for installations where: A basin mono tap (single lever, one tap hole) is being fitted with a flexi tail connection The supply pipe is 15mm copper and the tap tail is ½" BSP (the UK standard) A flat face compression fitting is required rather than a standard olive-and-nut compression If your installation uses a standard CxC compression connection (no BSP thread), see our Straight Chrome Isolation Valve or Full Bore Isolation Valve instead. Technical Specification Size: 15mm Inlet Connection: 15mm Flat Face Compression Outlet Connection: ½" BSP Male Thread Operation: Screwdriver Slot (quarter-turn) Body Material: Chrome-Plated Brass Application: Basin Mono Taps, Flexi Tail Connections, Hot & Cold Water Guarantee: 1 Year SKU: K23853 Alt. Part Numbers: KPSTRFLA15 Brand: KeyPlumb Country of Origin: China Complete Your Valve Range 15mm Straight Chrome Isolation Valve – CxC (WRAS) — standard CxC compression isolation valve; WRAS approved; for direct pipe-to-pipe isolation KeyPlumb 15mm Full Bore Isolation Valve – Chrome (WRAS) — full bore version for maximum flow; WRAS approved 15mm Chrome Lever Isolation Valve – Black Handle — CxC compression lever valve; no screwdriver needed 15mm Hot Water Butterfly Ball Valve – Red Handle (WRAS) — full bore butterfly valve for hot water lines 15mm Cold Water Butterfly Ball Valve – Blue Handle (WRAS) — full bore butterfly valve for cold water lines KeyPlumb 15mm Electrolytic Scale Reducer — inline scale reducer to protect valves and appliances from limescale Frequently Asked Questions What is a flat face compression fitting? A flat face compression fitting connects to the pipe using a flat sealing face rather than a traditional olive (ferrule). The pipe end is inserted and the nut is tightened, compressing the flat face against the pipe to create a watertight seal. It is commonly used in isolation valves where a BSP thread outlet is also required, such as this valve for basin mono tap installations. Can I order if the item shows as out of stock? Yes — we can fulfil this product even when stock shows as zero. Place your order as normal and we'll confirm lead time with you. What is the difference between this valve and a standard CxC isolation valve? A standard CxC (compression-to-compression) isolation valve has compression fittings on both ends and is used to isolate a section of pipe. This valve has a flat face compression inlet on one end and a ½" BSP male thread on the other — making it specifically designed to connect a 15mm supply pipe directly to a flexi tail on a basin tap. If you don't need a BSP thread outlet, use the straight CxC isolation valve instead. Will this fit my basin mono tap flexi tail? Yes — provided your flexi tail has a standard ½" BSP female connection (the UK standard for basin mono taps), this valve will connect directly. Check your tap's flexi tail specification if unsure. Is this valve WRAS approved? This valve carries a 1-year manufacturer's guarantee and is suitable for domestic hot and cold water supply. If you specifically require a WRAS-approved valve, please see our WRAS Approved Straight Isolation Valve or WRAS Approved Full Bore Isolation Valve. Can this be used on a hot water supply? Yes — this valve is suitable for both hot and cold water supply lines in standard domestic plumbing applications. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.
£1.25
-
Isolating Radiator Tail 15mm x ½" BSP – Pair | Remove Radiators Without Draining | Patented
Decorating a room? Replacing a radiator? Normally that means draining the system, dealing with dirty water, and refilling and re-pressurising the boiler afterwards. With these patented Isolating Radiator Tails, you don’t. Fit them once between the radiator and the valve, and from that point on you can remove the radiator in minutes — no draining, no mess, no water waste, no boiler interference. A genuinely clever solution to one of the most frustrating jobs in domestic heating.Sold as a pair (one for each end of the radiator). Fits standard 15mm x ½" BSP radiator valve connections.Key Features Patented Isolating Design — allows the radiator to be removed and refitted without draining the heating system No System Drainage Required — eliminates the need to drain, refill, and re-pressurise the boiler when removing a radiator Fits in Minutes — installs between the existing radiator valve and the radiator tail; no specialist tools required 15mm x ½" BSP — standard connection size compatible with all conventional UK radiator valve installations Sold as a Pair — one tail for each end of the radiator; everything you need for one radiator Suitable for All Standard Radiators — compatible with new builds and existing heating systems Protects Boiler Warranty — avoids the pressure fluctuations and air ingress associated with draining and refilling Eco-Friendly — no water waste from system drainage; no inhibitor top-up required after refitting Time-Saving for Decorators & Plumbers — dramatically reduces the time and disruption of radiator removal jobs How It WorksThe isolating radiator tail fits between your existing radiator valve and the radiator itself. Once installed, it incorporates an internal isolation mechanism that allows you to close off the flow at the tail before disconnecting the radiator — trapping the water in the system rather than releasing it. When you’re ready to refit the radiator, reconnect and reopen. The system stays pressurised and full throughout.Technical Specification Connection Size 15mm x ½" BSP Quantity Pair (2 tails per pack) Design Patented Isolating Valve Compatibility All standard UK radiator valve installations Application Radiator removal without system drainage SKU K96882 EAN 5033696467500 Alt. Part Numbers QBBL650 | 19TD368354 | 368354 Brand Hipkin Complete Your Radiator Installation Crosshead Chrome Radiator Valves – Straight & Angled | 15mm | Pair — classic crosshead chrome valves for traditional radiator installations Kartell Modern Angled Radiator Valves 15mm — contemporary angled radiator valves in brass construction Kartell Anthracite Angled Radiator Valve 15mm — premium anthracite finish angled valve for designer radiators Kartell Matt Black Twin TRV + Lockshield Pack — designer matt black thermostatic radiator valve set Chrome Radiator Valve Pipe Sleeve Kit — pipe sleeves and floor plates for a neat, professional valve finish Honeywell Valencia TRV Lockshield 15mm Angled — thermostatic radiator valve lockshield for temperature control Frequently Asked QuestionsDo I really not need to drain the system to remove a radiator?Correct — that’s the whole point of the patented design. Once the isolating tails are fitted, you close them off before disconnecting the radiator. The water stays in the system. You can remove the radiator, decorate, and refit it without touching the boiler pressure or losing any system water.Can I order if the item shows as out of stock?Yes — we can fulfil this product even when stock shows as zero. Place your order as normal and we’ll confirm lead time with you.Will these fit my existing radiator valves?These tails use a standard 15mm x ½" BSP connection — the most common radiator valve connection size in UK domestic heating systems. They are compatible with all standard radiator valve installations, both new builds and existing systems.Do I need a plumber to fit these?The tails are designed to be straightforward to install. A competent DIYer can fit them, though we always recommend a qualified plumber for any work on a sealed heating system to ensure compliance with building regulations and to protect boiler warranties.How many tails do I need per radiator?Two — one for each end of the radiator (flow and return). This product is sold as a pair, so one pack covers one radiator.Will fitting these affect my boiler warranty?The isolating tails are designed to protect boiler warranties by avoiding the pressure fluctuations, air ingress, and inhibitor dilution that occur when a system is drained and refilled. Always check your specific boiler warranty terms if in doubt.
£20.00 £12.00
-
15mm Straight Isolation Valve – Chrome Plated | WRAS Approved | CxC Compression | KeyPlumb
The valve behind the basin. The one under the sink. The one that lets you change a tap washer without turning off the water to the whole house. The KeyPlumb 15mm Straight Isolation Valve is a fundamental plumbing component — compact, chrome-plated, WRAS approved, and built to sit quietly in place for years until the moment it's needed. A flathead screwdriver is all it takes to isolate any individual fixture. Available as a single valve or pack of 10 for trade use. Key Features WRAS Approved — independently certified for use on mains potable water supplies; meets UK Water Supply (Water Fittings) Regulations Straight Pattern — inline configuration for direct pipe runs; ideal for basin, tap, and fixture isolation Screwdriver Slot Operation — quarter-turn flathead screwdriver; tamper-resistant and compact in tight spaces behind basins and under sinks Chrome-Plated Finish — corrosion-resistant, professional appearance; suits exposed installations CxC Compression Fittings — compression-to-compression connection both ends; compatible with standard 15mm copper and plastic pipe 15mm Size — the standard domestic pipe size for basin, tap, toilet, and appliance supply lines Hot & Cold Water — suitable for all standard domestic hot and cold water supply applications Single or Pack of 10 — buy what you need; pack of 10 offers the best per-unit value for trade use Technical Specification Size: 15mm Pattern: Straight (inline) Connection Type: Compression to Compression (CxC) Operation: Screwdriver Slot (quarter-turn) Finish: Chrome Plated Application: Hot & Cold Water, Basin, Tap & Fixture Isolation Approvals: WRAS Approved SKU (Single): K06926 SKU (x10): K06926 x10 Alt. Part Numbers: KPISO15 | 502CP Brand: KeyPlumb Country of Origin: China Complete Your Valve Range KeyPlumb 15mm Full Bore Isolation Valve – Chrome (WRAS) — full bore version for maximum flow; ideal where flow rate matters 15mm Chrome Isolation Valve – Flat Face Compression — flat face compression with ½" BSP thread for specific fitting types 15mm Chrome Lever Isolation Valve – Black Handle — CxC compression lever valve with contemporary black handle; no screwdriver needed 15mm Hot Water Butterfly Ball Valve – Red Handle (WRAS) — full bore butterfly valve for hot water lines; quarter-turn lever 15mm Cold Water Butterfly Ball Valve – Blue Handle (WRAS) — full bore butterfly valve for cold water lines; quarter-turn lever KeyPlumb 15mm Electrolytic Scale Reducer — inline scale reducer to protect valves and appliances from limescale Frequently Asked Questions What is a straight isolation valve used for? A straight isolation valve is fitted inline on a water supply pipe to allow a single fixture — such as a basin tap, toilet cistern, or kitchen tap — to be isolated for maintenance or replacement without turning off the water supply to the whole property. It's one of the most commonly fitted plumbing components in domestic installations. Can I order if the item shows as out of stock? Yes — we can fulfil this product even when stock shows as zero. Place your order as normal and we'll confirm lead time with you. What is the difference between a straight and angled isolation valve? A straight (inline) valve is used where the pipe runs directly to the fixture — the valve sits in the pipe run without changing direction. An angled valve (90°) is used where the pipe comes up from the floor or out from the wall and needs to turn before connecting to the fixture. Choose based on your pipe configuration. How do I operate a screwdriver slot isolation valve? Use a standard flathead screwdriver. When the slot is parallel to the pipe, the valve is open. When the slot is perpendicular (across) the pipe, the valve is closed. It's a quarter-turn (90°) operation — fast and positive. Does this work with plastic pipe as well as copper? This valve uses standard CxC compression fittings, compatible with 15mm copper pipe. For plastic pipe, use the appropriate insert/liner within the compression fitting to prevent the olive from crushing the pipe wall. Why buy the pack of 10? The pack of 10 offers the best per-unit price and is ideal for trade use, full bathroom or kitchen fits, or keeping a stock of spares on hand. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.
£1.25 - £11.50
-
15mm Full Bore Isolation Valve – Chrome Plated Brass | WRAS Approved | Screwdriver Slot | KeyPlumb
The workhorse of the isolation valve world. The KeyPlumb 15mm Full Bore Isolation Valve is the valve you fit and forget — tucked neatly behind a basin, under a sink, or inline on a supply pipe, ready to do its job when you need it. A screwdriver slot keeps it tamper-resistant and compact in tight spaces, while the full bore design ensures zero flow restriction when open. Chrome-plated brass construction, WRAS approval, and EN1254-2 compression fittings on both ends make this a specification-grade valve at a trade-friendly price. Key Features WRAS Approved — independently tested and certified for use on mains potable water supplies; meets UK Water Supply (Water Fittings) Regulations Full Bore Design — unrestricted 15mm flow path when open; no pressure drop or flow restriction Screwdriver Slot Operation — quarter-turn flathead screwdriver operation; tamper-resistant and compact for tight spaces Chrome-Plated Brass Body — nickel-plated brass with chrome finish; corrosion-resistant and professional in appearance EN1254-2 Compression Fittings — standard compression connections both ends; compatible with 15mm copper and plastic pipe 10 Bar Rated — maximum operating pressure well above typical UK mains (3–5 bar) Up to 95°C — suitable for hot and cold water systems and heating circuits Hot & Cold Water — suitable for all standard domestic plumbing and heating applications Technical Specification Size: 15mm Connection Type: EN1254-2 Compression (both ends) Valve Type: Full Bore Isolation Valve Operation: Screwdriver Slot (quarter-turn) Body Material: Nickel-Plated Brass Finish: Chrome Plated Max Working Pressure: 10 bar (145 psi) Max Working Temperature: 95°C Application: Hot & Cold Water, Heating Systems Approvals: WRAS Approved, EN1254-2 SKU (x1): K06922 Alt. Part Numbers: KPFBISO15 | 1003CP Brand: KeyPlumb Country of Origin: China Complete Your Valve Range Straight Isolation Valve – Chrome 15mm (WRAS) — straight-pattern chrome isolation valve; WRAS approved 15mm Chrome Isolation Valve – Flat Face Compression — flat face compression with ½" BSP thread 15mm Hot Water Butterfly Ball Valve – Red Handle (WRAS) — quarter-turn lever butterfly valve for hot water lines 15mm Cold Water Butterfly Ball Valve – Blue Handle (WRAS) — quarter-turn lever butterfly valve for cold water lines 15mm Chrome Lever Isolation Valve – Black Handle — CxC compression lever valve with contemporary black handle KeyPlumb 15mm Electrolytic Scale Reducer — inline scale reducer to protect valves and appliances from limescale Frequently Asked Questions What is the difference between a full bore and standard bore isolation valve? A full bore valve maintains the same internal diameter as the connected pipework (15mm), so there is no restriction to flow when the valve is open. A standard bore valve has a reduced internal diameter which can restrict flow and cause a pressure drop. For applications where flow rate matters — showers, baths, washing machines — always choose full bore. Can I order if the item shows as out of stock? Yes — we can fulfil this product even when stock shows as zero. Place your order as normal and we'll confirm lead time with you. How do I operate a screwdriver slot isolation valve? Use a standard flathead screwdriver. When the slot is parallel to the pipe, the valve is open. When the slot is perpendicular (across) the pipe, the valve is closed. It's a quarter-turn (90°) operation. Is this valve suitable for heating systems? Yes — the 95°C maximum temperature rating makes this valve suitable for heating system pipework, including radiator isolation and boiler connections, within standard domestic operating temperatures. Does this work with plastic pipe as well as copper? This valve uses EN1254-2 compression fittings, compatible with 15mm copper pipe. For plastic pipe, use the appropriate insert/liner within the compression fitting to prevent the olive from crushing the pipe wall. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.
£2.70
-
15mm Cold Water Butterfly Ball Valve – WRAS Approved | Blue Handle | Full Bore | KeyPlumb
The cold water companion to the red handle hot water valve — same proven full-bore butterfly design, same WRAS approval, same quarter-turn simplicity. The KeyPlumb 15mm Cold Water Butterfly Ball Valve features a blue handle for instant cold water identification, eliminating any risk of confusion during installation or maintenance. Nickel-plated brass construction, PN25 pressure rating, and BS EN331 compliance make this a valve you can specify with confidence. Key Features WRAS Approved — meets UK Water Regulations Advisory Scheme requirements; suitable for use on mains potable water supplies BS EN331 Compliant — manufactured to the European standard for ball valves Blue Handle — universally recognised cold water identification; industry-standard colour coding (blue = cold, red = hot) Full Bore Design — unrestricted flow path; no pressure drop or flow restriction when fully open Quarter-Turn Operation — fast, positive 90° open/close; lever position gives instant visual confirmation of valve state Nickel-Plated Brass Body — corrosion-resistant construction for long-term reliability 15mm Compression Fitting — compatible with standard UK 15mm copper and plastic pipe systems PN25 Rated — 25 bar working pressure; well above typical UK mains pressure Temperature Range −10°C to +85°C — suitable for all cold water and low-temperature applications Available in Packs of 1, 2 or 5 — buy the quantity you need at a better per-unit price Technical Specification Size: 15mm Connection Type: Compression (both ends) Valve Type: Butterfly Ball Valve Bore: Full Bore Operation: Quarter-Turn Lever (90°) Handle Colour: Blue (Cold Water) Body Material: Nickel-Plated Brass Working Pressure: PN25 (25 bar) Temperature Range: −10°C to +85°C Approvals: WRAS Approved, BS EN331 SKU (x1): K55582 Brand: KeyPlumb Country of Origin: China Complete Your Valve Range 15mm Hot Water Butterfly Ball Valve – Red Handle (WRAS) — the matching hot water companion; identical spec with red handle identification KeyPlumb 15mm Full Bore Isolation Valve – Chrome (WRAS) — chrome-plated brass isolation valve for a smarter finish Straight Isolation Valve – Chrome 15mm (WRAS) — straight-pattern WRAS approved chrome isolation valve 15mm Chrome Isolation Valve – Flat Face Compression — flat face compression with ½" BSP thread 15mm Chrome Lever Isolation Valve – Black Handle — CxC compression lever valve with contemporary black handle KeyPlumb 15mm Electrolytic Scale Reducer — inline scale reducer to protect valves and appliances from limescale Frequently Asked Questions What is the difference between the blue and red handle versions? The blue handle version (this product) is for cold water lines; the red handle version is for hot water lines. Both are identical in specification — the colour coding is a standard plumbing convention to prevent confusion during installation and maintenance. Can I order if the item shows as out of stock? Yes — we can fulfil this product even when stock shows as zero. Place your order as normal and we'll confirm lead time with you. Is this valve suitable for mains pressure systems? Yes — the valve is rated to PN25 (25 bar), well above typical UK mains pressure of 3–5 bar. It is WRAS approved for use on mains potable water supplies. Does this work with plastic pipe as well as copper? This valve uses a standard 15mm compression fitting, compatible with 15mm copper pipe. For plastic pipe, use the appropriate insert/liner within the compression fitting to prevent the olive from crushing the pipe wall. Can this valve be used on a hot water supply? Technically yes — the temperature rating of −10°C to +85°C covers most domestic hot water temperatures. However, for hot water lines we recommend the red handle version to maintain correct colour coding and avoid confusion. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.
£3.80
-
15mm Hot Water Butterfly Ball Valve – WRAS Approved | Red Handle | Full Bore | KeyPlumb
When you need to isolate a hot water supply quickly and confidently, the colour of the handle matters. The KeyPlumb 15mm Hot Water Butterfly Ball Valve features a red handle — the universally recognised identifier for hot water lines — so there's never any ambiguity during installation, maintenance, or an emergency shut-off. A single quarter-turn is all it takes to go from fully open to fully closed. WRAS approved and BS EN331 compliant, this is a valve you can fit and forget — ideal whether you're doing a single tap replacement or fitting out a full bathroom or kitchen. Key Features WRAS Approved — meets UK Water Regulations Advisory Scheme requirements; suitable for use on mains water supplies BS EN331 Compliant — manufactured to the European standard for ball valves for gas and other fluids Red Handle — universally recognised hot water identification; eliminates confusion between hot and cold supplies Full Bore Design — unrestricted flow path maintains system pressure and flow rate Quarter-Turn Operation — fast, positive open/close action; handle position gives instant visual confirmation of valve state Nickel-Plated Brass Body — corrosion-resistant construction for long-term reliability in hot water systems 15mm Compression Fitting — compatible with standard UK 15mm copper and plastic pipe systems PN25 Rated — working pressure up to 25 bar; suitable for all standard domestic and commercial plumbing applications Temperature Range −10°C to +85°C — suitable for hot and cold water systems Technical Specification Size: 15mm Connection Type: Compression Valve Type: Butterfly Ball Valve Bore: Full Bore Operation: Quarter-Turn Lever Handle Colour: Red (Hot Water) Body Material: Nickel-Plated Brass Working Pressure: PN25 (25 bar) Temperature Range: −10°C to +85°C Approvals: WRAS Approved, BS EN331 SKU : K55581 Brand: KeyPlumb Country of Origin: China Complete Your Valve Range 15mm Cold Water Butterfly Ball Valve – Blue Handle (WRAS) — the matching cold water companion; WRAS approved, same full bore design KeyPlumb 15mm Full Bore Isolation Valve – Chrome (WRAS) — chrome-plated brass isolation valve, WRAS approved, for a smarter finish Straight Isolation Valve – Chrome 15mm (WRAS) — straight-pattern chrome isolation valve for tight spaces 15mm Chrome Isolation Valve – Flat Face Compression — flat face compression fitting with ½" BSP thread 15mm Chrome Lever Isolation Valve – Black Handle — CxC compression lever valve with contemporary black handle KeyPlumb 15mm Electrolytic Scale Reducer — inline scale reducer for 15mm pipework; protects valves and appliances from limescale Frequently Asked Questions What is the difference between the red and blue handle versions? The red handle version (this product) is for hot water lines; the blue handle version is for cold water lines. Both are identical in specification — the colour coding is a standard plumbing convention to prevent confusion during installation and maintenance. Can I order if the item shows as out of stock? Yes — we can fulfil this product even when stock shows as zero. Place your order as normal and we'll confirm lead time with you. Is this valve suitable for mains pressure systems? Yes — the valve is rated to PN25 (25 bar working pressure), which is well above typical UK mains pressure. It is WRAS approved for use on mains water supplies. Does this work with plastic (push-fit) pipe as well as copper? This valve uses a standard 15mm compression fitting. It is compatible with 15mm copper pipe. For use with plastic pipe, ensure you use the appropriate insert/liner within the compression fitting. If in doubt, contact us at customerservice@bubblegumbathrooms.co.uk for advice. Is professional installation required? While this valve is straightforward to install for a competent DIYer, we recommend professional installation to ensure compliance with building regulations and to maintain any relevant warranties on connected appliances. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.
£4.80
-
15mm Chrome Lever Isolation Valve – Black Lever Handle | CxC Compression | KeyPlumb
A clean chrome body, a sharp black lever — this is an isolation valve that does its job without looking like an afterthought. The KeyPlumb 15mm Chrome Lever Isolation Valve uses a compression-to-compression (CxC) fitting for straightforward installation on standard 15mm pipework, and a quarter-turn black lever for fast, positive shut-off. Whether you're isolating a tap, toilet, washing machine, or shower, one turn is all it takes — ideal for single jobs or trade use. Key Features Chrome-Plated Brass Body — corrosion-resistant construction with a polished finish that complements modern bathroom and kitchen fittings Black Lever Handle — contemporary styling with a positive grip; lever position gives instant visual confirmation of open/closed state Quarter-Turn Operation — fast, decisive shut-off; 90° from fully open to fully closed CxC Compression Fitting — compression-to-compression connection; compatible with standard 15mm copper and plastic pipe 15mm Size — the most common domestic pipe size; suits taps, toilets, showers, washing machines, and more Suitable for Hot & Cold Water — works across all standard domestic water supply applications Technical Specification Size: 15mm Connection Type: Compression to Compression (CxC) Valve Type: Lever Isolation Valve Operation: Quarter-Turn Lever Handle Colour: Black Body Finish: Chrome-Plated Brass Application: Hot & Cold Water Systems SKU (x1): K06927 Brand: KeyPlumb Country of Origin: China Complete Your Valve Range 15mm Hot Water Butterfly Ball Valve – Red Handle (WRAS) — WRAS approved butterfly ball valve for hot water lines; full bore, PN25 rated 15mm Cold Water Butterfly Ball Valve – Blue Handle (WRAS) — matching cold water butterfly valve; WRAS approved KeyPlumb 15mm Full Bore Isolation Valve – Chrome (WRAS) — WRAS approved full bore chrome isolation valve Straight Isolation Valve – Chrome 15mm (WRAS) — straight-pattern WRAS approved chrome isolation valve 15mm Chrome Isolation Valve – Flat Face Compression — flat face compression with ½" BSP thread KeyPlumb 15mm Electrolytic Scale Reducer — inline scale reducer to protect valves and appliances from limescale build-up Frequently Asked Questions Is this valve WRAS approved? This valve is compliant with UK plumbing standards for domestic use. If you specifically require a WRAS-approved valve for mains water supply applications, please see our KeyPlumb 15mm Full Bore Isolation Valve (WRAS Approved) or the WRAS Approved Butterfly Ball Valves. Can I order if the item shows as out of stock? Yes — we can fulfil this product even when stock shows as zero. Place your order as normal and we'll confirm lead time with you. Does this work with plastic (push-fit) pipe? This valve uses a standard 15mm compression fitting. It is compatible with 15mm copper pipe. For use with plastic pipe, ensure you use the appropriate insert/liner within the compression fitting to prevent the olive from crushing the pipe. What is the difference between CxC and a flat-face compression valve? CxC (compression-to-compression) means both ends of the valve accept a standard olive-and-nut compression fitting — the most common type in UK domestic plumbing. A flat-face compression valve has a different end connection designed for specific fittings. For most standard installations, CxC is the correct choice. Can this valve be used on a hot water supply? Yes — this valve is suitable for both hot and cold water systems in standard domestic plumbing applications. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.
£1.50
-
Patterned Chrome Radiator Valves
Add a decorative finishing touch to your radiator with the Patterned Chrome Radiator Valves. Supplied as a pair with 15mm connectors, these valves combine practical flow control with an ornate patterned design that elevates any traditional or transitional bathroom. Available in straight, angled, and corner configurations to suit your pipework layout. Key Features Decorative patterned design Chrome finish Supplied as a pair 15mm connectors Available in straight, angled & corner Suitable for central heating systems Technical Specification Brand: Aqua Elegance Finish: Chrome Connection: 15mm Supply: Pair Configurations: Straight, Angled, Corner Country of Origin: China Also Available In These valves are available in a range of finishes to match your bathroom scheme: Patterned Brushed Brass Radiator Valves Patterned Brushed Bronze Radiator Valves Frequently Asked Questions Are these valves supplied as a pair? Yes — these valves are supplied as a pair, including both the flow and lockshield valves with 15mm connectors. Can I order if the item shows as out of stock? Yes — you can still place your order even if this item shows as out of stock. We will contact you with an estimated lead time once your order is placed.
£19.00 - £35.00
-
Patterned Brushed Brass Radiator Valves
Patterned Brushed Brass Radiator Valves - Pair These patterned brushed brass radiator valves combine contemporary styling with reliable functionality for central heating systems. Supplied as a pair with 15mm connector size, these valves deliver quality performance with a sophisticated brushed brass finish that complements modern and traditional interiors. Key Features Brushed brass finish - sophisticated, warm appearance Patterned design - decorative detailing Packed as a pair - complete valve set 15mm connector size - standard fitting Compact dimensions - H 100 x W 50 x D 50mm Central heating compatible - suitable for most systems 1 year guarantee - manufacturer warranty Technical Specification Dimensions: H 100mm x W 50mm x D 50mm Finish: Brushed brass Design: Patterned Connector size: 15mm Pack quantity: Pair (2 valves) Compatibility: Central heating systems SKU: BGBP107159 Vendor: Aqua Elegance Warranty: 1 year Perfect for: Central heating radiator installations requiring stylish patterned brushed brass valves with standard 15mm connections.
£30.00 - £39.00
-
Patterned Brushed Bronze Radiator Valves
Patterned Brushed Bronze Radiator Valves - Pair These patterned brushed bronze radiator valves combine contemporary styling with reliable functionality for central heating systems. Supplied as a pair with 15mm connector size, these valves deliver quality performance with a sophisticated brushed bronze finish that complements modern and traditional interiors. Key Features Brushed bronze finish - sophisticated, warm appearance Patterned design - decorative detailing Packed as a pair - complete valve set 15mm connector size - standard fitting Central heating compatible - suitable for most systems 1 year guarantee - manufacturer warranty Technical Specification Finish: Brushed bronze Design: Patterned Connector size: 15mm Pack quantity: Pair (2 valves) Compatibility: Central heating systems SKU: BGBP108856 Vendor: Aqua Elegance Warranty: 1 year Perfect for: Central heating radiator installations requiring stylish patterned brushed bronze valves with standard 15mm connections.
£35.00 - £39.00
-
Patterned Matt Black Radiator Valves
Patterned Matt Black Radiator Valves - Pair These patterned matt black radiator valves combine contemporary styling with reliable functionality for central heating systems. Supplied as a pair with 15mm connector size, these valves deliver quality performance with a sophisticated matt black finish that complements modern interiors. Key Features Matt black finish - contemporary, sophisticated appearance Patterned design - decorative detailing Packed as a pair - complete valve set 15mm connector size - standard fitting Central heating compatible - suitable for most systems 1 year guarantee - manufacturer warranty Technical Specification Finish: Matt black Design: Patterned Connector size: 15mm Pack quantity: Pair (2 valves) Compatibility: Central heating systems SKU: BGBP108852 Vendor: Aqua Elegance Warranty: 1 year Perfect for: Central heating radiator installations requiring stylish patterned matt black valves with standard 15mm connections.
£22.00 - £36.00
-
Crosshead Chrome Radiator Valves | Straight & Angled | 15mm | Pair
Classic styling, reliable control. These Crosshead Chrome Radiator Valves from Aqua Elegance bring a timeless crosshead design to your radiator installation, finished in polished chrome to complement both traditional and contemporary bathroom schemes. Available in straight or angled configurations with 15mm connectors for straightforward integration into standard central heating systems. Supplied as a pair. Key Features Classic crosshead design — suits traditional and contemporary interiors Polished chrome finish — clean, durable appearance Available in straight or angled — to suit your pipework configuration 15mm connectors — compatible with standard central heating systems Supplied as a pair — both valves included Reliable temperature control — consistent heat regulation 1-year manufacturer guarantee Technical Specification Brand: Aqua Elegance (BG Bathrooms) Design: Crosshead Finish: Chrome Connector size: 15mm Configuration: Straight or Angled (select from dropdown) Supplied: As a pair Compatibility: Standard central heating systems Guarantee: 1 year SKU (Angled): BGBP103025 — Barcode: 5054913450341 SKU (Straight): BGBP103024 — Barcode: 5054913450334 Complete Your Radiator Installation 180x18mm Radiator Pipe Sleeves — clip-on pipe sleeves in Chrome, Matt Black, Brushed Brass & Brushed Bronze to conceal pipework and finish the installation Chrome Radiator Valve Pipe Sleeve Kit — Pair with Floor Plates — a complete paired kit with floor plates for a fully finished valve installation Also Consider Patterned Chrome Radiator Valves — patterned design alternative in chrome Patterned Matt Black Radiator Valves — patterned design in matt black Patterned Brushed Brass Radiator Valves — patterned design in brushed brass Patterned Brushed Bronze Radiator Valves — patterned design in brushed bronze Frequently Asked Questions Are these supplied as a pair? Yes — both valves are included in the price. You will receive two crosshead chrome radiator valves per order. What is the difference between straight and angled valves? Straight valves are used when the pipework comes out of the wall horizontally at the same level as the radiator inlet. Angled valves are used when the pipework comes up from the floor — the most common configuration in UK homes. If you're unsure, check the direction your pipes run before ordering. What pipe size do these valves fit? These valves have 15mm connectors, compatible with standard 15mm copper pipe used in UK central heating systems. Can I use these with pipe sleeves? Yes — pair these valves with our 180x18mm Radiator Pipe Sleeves in Chrome to conceal the pipework and achieve a fully finished look. What guarantee do these valves carry? Aqua Elegance provides a 1-year manufacturer guarantee on these radiator valves.
£49.00 £40.00
-
Tavistock TR9008 Comfort Height Concealed Cistern - 6/3L Dual Flush with Pneumatic Button
Tavistock / Roper Rhodes TR9008 Comfort Height Concealed Cistern Premium concealed cistern designed for comfort height installations - the Tavistock TR9008 combines efficient dual flush technology with easy installation and superior build quality. Key Features 6/3 Litre Dual Flush - Water-efficient flushing with two volume options Comfort Height Compatible - Works with all Tavistock / Roper Rhodes comfort height back to wall pans Pre-Assembled - Arrives ready to install, saving time and labour Insulated Design - Includes polystyrene insulation jacket to prevent condensation Chrome Pneumatic Button - Premium chrome effect flush button included Furniture Compatible - Designed for 820mm high furniture units Flexible Flush Options - Compatible with optional square flush button or contactless sensor Technical Specifications Flush Volume: 6/3 litres dual flush Height: Suitable for 820mm furniture units Installation: Concealed, back to wall Included: Polystyrene insulation jacket, chrome pneumatic button Model: TR9008 Brand: Tavistock / Roper Rhodes What's Included Concealed cistern (pre-assembled) Polystyrene insulation jacket Chrome effect pneumatic flush button Please Note: Not suitable for use with flush plates in furniture installations. Why Choose This Cistern? The Tavistock TR9008 offers professional-grade performance with straightforward installation. The pre-assembled design means less time on-site, while the insulation jacket prevents condensation issues. Perfect for modern bathroom installations where comfort height is required and a clean, concealed aesthetic is desired.
£146.00 £68.00
You have seen 239 out of 239 products
