FW Hipkin

Show previous products

• 

  View options

  15mm Hot Water Butterfly Ball Valve – WRAS Approved | Red Handle | Full Bore | KeyPlumb

  3 in stock 1-3 Days

  When you need to isolate a hot water supply quickly and confidently, the colour of the handle matters. The KeyPlumb 15mm Hot Water Butterfly Ball Valve features a red handle — the universally recognised identifier for hot water lines — so there's never any ambiguity during installation, maintenance, or an emergency shut-off. A single quarter-turn is all it takes to go from fully open to fully closed. WRAS approved and BS EN331 compliant, this is a valve you can fit and forget — ideal whether you're doing a single tap replacement or fitting out a full bathroom or kitchen. Key Features WRAS Approved — meets UK Water Regulations Advisory Scheme requirements; suitable for use on mains water supplies BS EN331 Compliant — manufactured to the European standard for ball valves for gas and other fluids Red Handle — universally recognised hot water identification; eliminates confusion between hot and cold supplies Full Bore Design — unrestricted flow path maintains system pressure and flow rate Quarter-Turn Operation — fast, positive open/close action; handle position gives instant visual confirmation of valve state Nickel-Plated Brass Body — corrosion-resistant construction for long-term reliability in hot water systems 15mm Compression Fitting — compatible with standard UK 15mm copper and plastic pipe systems PN25 Rated — working pressure up to 25 bar; suitable for all standard domestic and commercial plumbing applications Temperature Range −10°C to +85°C — suitable for hot and cold water systems Technical Specification Size: 15mm Connection Type: Compression Valve Type: Butterfly Ball Valve Bore: Full Bore Operation: Quarter-Turn Lever Handle Colour: Red (Hot Water) Body Material: Nickel-Plated Brass Working Pressure: PN25 (25 bar) Temperature Range: −10°C to +85°C Approvals: WRAS Approved, BS EN331 SKU : K55581 Brand: KeyPlumb Country of Origin: China Complete Your Valve Range 15mm Cold Water Butterfly Ball Valve – Blue Handle (WRAS) — the matching cold water companion; WRAS approved, same full bore design KeyPlumb 15mm Full Bore Isolation Valve – Chrome (WRAS) — chrome-plated brass isolation valve, WRAS approved, for a smarter finish Straight Isolation Valve – Chrome 15mm (WRAS) — straight-pattern chrome isolation valve for tight spaces 15mm Chrome Isolation Valve – Flat Face Compression — flat face compression fitting with ½" BSP thread 15mm Chrome Lever Isolation Valve – Black Handle — CxC compression lever valve with contemporary black handle KeyPlumb 15mm Electrolytic Scale Reducer — inline scale reducer for 15mm pipework; protects valves and appliances from limescale Frequently Asked Questions What is the difference between the red and blue handle versions? The red handle version (this product) is for hot water lines; the blue handle version is for cold water lines. Both are identical in specification — the colour coding is a standard plumbing convention to prevent confusion during installation and maintenance. Can I order if the item shows as out of stock? Yes — we can fulfil this product even when stock shows as zero. Place your order as normal and we'll confirm lead time with you. Is this valve suitable for mains pressure systems? Yes — the valve is rated to PN25 (25 bar working pressure), which is well above typical UK mains pressure. It is WRAS approved for use on mains water supplies. Does this work with plastic (push-fit) pipe as well as copper? This valve uses a standard 15mm compression fitting. It is compatible with 15mm copper pipe. For use with plastic pipe, ensure you use the appropriate insert/liner within the compression fitting. If in doubt, contact us at customerservice@bubblegumbathrooms.co.uk for advice. Is professional installation required? While this valve is straightforward to install for a competent DIYer, we recommend professional installation to ensure compliance with building regulations and to maintain any relevant warranties on connected appliances. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.

  Read more less

  3 in stock 1-3 Days

  £4.80

  View options

• 

  View options

  15mm Cold Water Butterfly Ball Valve – WRAS Approved | Blue Handle | Full Bore | KeyPlumb

  3 in stock 1-3 Days

  The cold water companion to the red handle hot water valve — same proven full-bore butterfly design, same WRAS approval, same quarter-turn simplicity. The KeyPlumb 15mm Cold Water Butterfly Ball Valve features a blue handle for instant cold water identification, eliminating any risk of confusion during installation or maintenance. Nickel-plated brass construction, PN25 pressure rating, and BS EN331 compliance make this a valve you can specify with confidence. Key Features WRAS Approved — meets UK Water Regulations Advisory Scheme requirements; suitable for use on mains potable water supplies BS EN331 Compliant — manufactured to the European standard for ball valves Blue Handle — universally recognised cold water identification; industry-standard colour coding (blue = cold, red = hot) Full Bore Design — unrestricted flow path; no pressure drop or flow restriction when fully open Quarter-Turn Operation — fast, positive 90° open/close; lever position gives instant visual confirmation of valve state Nickel-Plated Brass Body — corrosion-resistant construction for long-term reliability 15mm Compression Fitting — compatible with standard UK 15mm copper and plastic pipe systems PN25 Rated — 25 bar working pressure; well above typical UK mains pressure Temperature Range −10°C to +85°C — suitable for all cold water and low-temperature applications Available in Packs of 1, 2 or 5 — buy the quantity you need at a better per-unit price Technical Specification Size: 15mm Connection Type: Compression (both ends) Valve Type: Butterfly Ball Valve Bore: Full Bore Operation: Quarter-Turn Lever (90°) Handle Colour: Blue (Cold Water) Body Material: Nickel-Plated Brass Working Pressure: PN25 (25 bar) Temperature Range: −10°C to +85°C Approvals: WRAS Approved, BS EN331 SKU (x1): K55582 Brand: KeyPlumb Country of Origin: China Complete Your Valve Range 15mm Hot Water Butterfly Ball Valve – Red Handle (WRAS) — the matching hot water companion; identical spec with red handle identification KeyPlumb 15mm Full Bore Isolation Valve – Chrome (WRAS) — chrome-plated brass isolation valve for a smarter finish Straight Isolation Valve – Chrome 15mm (WRAS) — straight-pattern WRAS approved chrome isolation valve 15mm Chrome Isolation Valve – Flat Face Compression — flat face compression with ½" BSP thread 15mm Chrome Lever Isolation Valve – Black Handle — CxC compression lever valve with contemporary black handle KeyPlumb 15mm Electrolytic Scale Reducer — inline scale reducer to protect valves and appliances from limescale Frequently Asked Questions What is the difference between the blue and red handle versions? The blue handle version (this product) is for cold water lines; the red handle version is for hot water lines. Both are identical in specification — the colour coding is a standard plumbing convention to prevent confusion during installation and maintenance. Can I order if the item shows as out of stock? Yes — we can fulfil this product even when stock shows as zero. Place your order as normal and we'll confirm lead time with you. Is this valve suitable for mains pressure systems? Yes — the valve is rated to PN25 (25 bar), well above typical UK mains pressure of 3–5 bar. It is WRAS approved for use on mains potable water supplies. Does this work with plastic pipe as well as copper? This valve uses a standard 15mm compression fitting, compatible with 15mm copper pipe. For plastic pipe, use the appropriate insert/liner within the compression fitting to prevent the olive from crushing the pipe wall. Can this valve be used on a hot water supply? Technically yes — the temperature rating of −10°C to +85°C covers most domestic hot water temperatures. However, for hot water lines we recommend the red handle version to maintain correct colour coding and avoid confusion. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.

  Read more less

  3 in stock 1-3 Days

  £3.80

  View options

• 

  View options

  15mm Full Bore Isolation Valve – Chrome Plated Brass | WRAS Approved | Screwdriver Slot | KeyPlumb

  10 in stock 1-3 Days

  The workhorse of the isolation valve world. The KeyPlumb 15mm Full Bore Isolation Valve is the valve you fit and forget — tucked neatly behind a basin, under a sink, or inline on a supply pipe, ready to do its job when you need it. A screwdriver slot keeps it tamper-resistant and compact in tight spaces, while the full bore design ensures zero flow restriction when open. Chrome-plated brass construction, WRAS approval, and EN1254-2 compression fittings on both ends make this a specification-grade valve at a trade-friendly price. Key Features WRAS Approved — independently tested and certified for use on mains potable water supplies; meets UK Water Supply (Water Fittings) Regulations Full Bore Design — unrestricted 15mm flow path when open; no pressure drop or flow restriction Screwdriver Slot Operation — quarter-turn flathead screwdriver operation; tamper-resistant and compact for tight spaces Chrome-Plated Brass Body — nickel-plated brass with chrome finish; corrosion-resistant and professional in appearance EN1254-2 Compression Fittings — standard compression connections both ends; compatible with 15mm copper and plastic pipe 10 Bar Rated — maximum operating pressure well above typical UK mains (3–5 bar) Up to 95°C — suitable for hot and cold water systems and heating circuits Hot & Cold Water — suitable for all standard domestic plumbing and heating applications Technical Specification Size: 15mm Connection Type: EN1254-2 Compression (both ends) Valve Type: Full Bore Isolation Valve Operation: Screwdriver Slot (quarter-turn) Body Material: Nickel-Plated Brass Finish: Chrome Plated Max Working Pressure: 10 bar (145 psi) Max Working Temperature: 95°C Application: Hot & Cold Water, Heating Systems Approvals: WRAS Approved, EN1254-2 SKU (x1): K06922 Alt. Part Numbers: KPFBISO15 | 1003CP Brand: KeyPlumb Country of Origin: China Complete Your Valve Range Straight Isolation Valve – Chrome 15mm (WRAS) — straight-pattern chrome isolation valve; WRAS approved 15mm Chrome Isolation Valve – Flat Face Compression — flat face compression with ½" BSP thread 15mm Hot Water Butterfly Ball Valve – Red Handle (WRAS) — quarter-turn lever butterfly valve for hot water lines 15mm Cold Water Butterfly Ball Valve – Blue Handle (WRAS) — quarter-turn lever butterfly valve for cold water lines 15mm Chrome Lever Isolation Valve – Black Handle — CxC compression lever valve with contemporary black handle KeyPlumb 15mm Electrolytic Scale Reducer — inline scale reducer to protect valves and appliances from limescale Frequently Asked Questions What is the difference between a full bore and standard bore isolation valve? A full bore valve maintains the same internal diameter as the connected pipework (15mm), so there is no restriction to flow when the valve is open. A standard bore valve has a reduced internal diameter which can restrict flow and cause a pressure drop. For applications where flow rate matters — showers, baths, washing machines — always choose full bore. Can I order if the item shows as out of stock? Yes — we can fulfil this product even when stock shows as zero. Place your order as normal and we'll confirm lead time with you. How do I operate a screwdriver slot isolation valve? Use a standard flathead screwdriver. When the slot is parallel to the pipe, the valve is open. When the slot is perpendicular (across) the pipe, the valve is closed. It's a quarter-turn (90°) operation. Is this valve suitable for heating systems? Yes — the 95°C maximum temperature rating makes this valve suitable for heating system pipework, including radiator isolation and boiler connections, within standard domestic operating temperatures. Does this work with plastic pipe as well as copper? This valve uses EN1254-2 compression fittings, compatible with 15mm copper pipe. For plastic pipe, use the appropriate insert/liner within the compression fitting to prevent the olive from crushing the pipe wall. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.

  Read more less

  10 in stock 1-3 Days

  £2.70

  View options

• 

  View options

  15mm Straight Isolation Valve – Chrome Plated | WRAS Approved | CxC Compression | KeyPlumb

  12 in stock 1-3 Days

  The valve behind the basin. The one under the sink. The one that lets you change a tap washer without turning off the water to the whole house. The KeyPlumb 15mm Straight Isolation Valve is a fundamental plumbing component — compact, chrome-plated, WRAS approved, and built to sit quietly in place for years until the moment it's needed. A flathead screwdriver is all it takes to isolate any individual fixture. Available as a single valve or pack of 10 for trade use. Key Features WRAS Approved — independently certified for use on mains potable water supplies; meets UK Water Supply (Water Fittings) Regulations Straight Pattern — inline configuration for direct pipe runs; ideal for basin, tap, and fixture isolation Screwdriver Slot Operation — quarter-turn flathead screwdriver; tamper-resistant and compact in tight spaces behind basins and under sinks Chrome-Plated Finish — corrosion-resistant, professional appearance; suits exposed installations CxC Compression Fittings — compression-to-compression connection both ends; compatible with standard 15mm copper and plastic pipe 15mm Size — the standard domestic pipe size for basin, tap, toilet, and appliance supply lines Hot & Cold Water — suitable for all standard domestic hot and cold water supply applications Single or Pack of 10 — buy what you need; pack of 10 offers the best per-unit value for trade use Technical Specification Size: 15mm Pattern: Straight (inline) Connection Type: Compression to Compression (CxC) Operation: Screwdriver Slot (quarter-turn) Finish: Chrome Plated Application: Hot & Cold Water, Basin, Tap & Fixture Isolation Approvals: WRAS Approved SKU (Single): K06926 SKU (x10): K06926 x10 Alt. Part Numbers: KPISO15 | 502CP Brand: KeyPlumb Country of Origin: China Complete Your Valve Range KeyPlumb 15mm Full Bore Isolation Valve – Chrome (WRAS) — full bore version for maximum flow; ideal where flow rate matters 15mm Chrome Isolation Valve – Flat Face Compression — flat face compression with ½" BSP thread for specific fitting types 15mm Chrome Lever Isolation Valve – Black Handle — CxC compression lever valve with contemporary black handle; no screwdriver needed 15mm Hot Water Butterfly Ball Valve – Red Handle (WRAS) — full bore butterfly valve for hot water lines; quarter-turn lever 15mm Cold Water Butterfly Ball Valve – Blue Handle (WRAS) — full bore butterfly valve for cold water lines; quarter-turn lever KeyPlumb 15mm Electrolytic Scale Reducer — inline scale reducer to protect valves and appliances from limescale Frequently Asked Questions What is a straight isolation valve used for? A straight isolation valve is fitted inline on a water supply pipe to allow a single fixture — such as a basin tap, toilet cistern, or kitchen tap — to be isolated for maintenance or replacement without turning off the water supply to the whole property. It's one of the most commonly fitted plumbing components in domestic installations. Can I order if the item shows as out of stock? Yes — we can fulfil this product even when stock shows as zero. Place your order as normal and we'll confirm lead time with you. What is the difference between a straight and angled isolation valve? A straight (inline) valve is used where the pipe runs directly to the fixture — the valve sits in the pipe run without changing direction. An angled valve (90°) is used where the pipe comes up from the floor or out from the wall and needs to turn before connecting to the fixture. Choose based on your pipe configuration. How do I operate a screwdriver slot isolation valve? Use a standard flathead screwdriver. When the slot is parallel to the pipe, the valve is open. When the slot is perpendicular (across) the pipe, the valve is closed. It's a quarter-turn (90°) operation — fast and positive. Does this work with plastic pipe as well as copper? This valve uses standard CxC compression fittings, compatible with 15mm copper pipe. For plastic pipe, use the appropriate insert/liner within the compression fitting to prevent the olive from crushing the pipe wall. Why buy the pack of 10? The pack of 10 offers the best per-unit price and is ideal for trade use, full bathroom or kitchen fits, or keeping a stock of spares on hand. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.

  Read more less

  12 in stock 1-3 Days

  £1.25 - £11.50

  View options

• 

  View options

  KeyPlumb 15mm Flat Face Compression Isolation Valve – Chrome | ½" BSP Male Thread

  8 in stock 1-3 Days

  Not all isolation valves are the same — and this one is specified for a reason. The KeyPlumb 15mm Flat Face Compression x ½" BSP Isolation Valve is the correct valve for installations where a basin mono tap with a flexi tail connects to a 15mm copper supply pipe. The flat face compression end grips the pipe without an olive, while the ½" male BSP thread connects directly to the flexi tail. A flathead screwdriver closes it off in a quarter-turn. Chrome-plated brass, neat, and built to last behind a basin pedestal for years. Key Features Flat Face Compression Inlet — 15mm flat face compression fitting; connects to copper pipe without a traditional olive; provides a secure, leak-proof seal ½" BSP Male Thread Outlet — standard ½" male BSP thread; connects directly to flexi tails on basin mono taps, kitchen taps, and similar fixtures Screwdriver Slot Operation — quarter-turn flathead screwdriver; tamper-resistant and compact for tight under-basin spaces Chrome-Plated Brass Body — corrosion-resistant construction with a polished chrome finish; professional appearance for exposed installations Isolates Individual Fixtures — allows a tap or fixture to be isolated for maintenance without shutting off the water supply to the whole property Hot & Cold Water — suitable for both hot and cold water supply lines 1-Year Manufacturer's Guarantee — backed by KeyPlumb warranty When to Use This Valve This valve is specifically designed for installations where: A basin mono tap (single lever, one tap hole) is being fitted with a flexi tail connection The supply pipe is 15mm copper and the tap tail is ½" BSP (the UK standard) A flat face compression fitting is required rather than a standard olive-and-nut compression If your installation uses a standard CxC compression connection (no BSP thread), see our Straight Chrome Isolation Valve or Full Bore Isolation Valve instead. Technical Specification Size: 15mm Inlet Connection: 15mm Flat Face Compression Outlet Connection: ½" BSP Male Thread Operation: Screwdriver Slot (quarter-turn) Body Material: Chrome-Plated Brass Application: Basin Mono Taps, Flexi Tail Connections, Hot & Cold Water Guarantee: 1 Year SKU: K23853 Alt. Part Numbers: KPSTRFLA15 Brand: KeyPlumb Country of Origin: China Complete Your Valve Range 15mm Straight Chrome Isolation Valve – CxC (WRAS) — standard CxC compression isolation valve; WRAS approved; for direct pipe-to-pipe isolation KeyPlumb 15mm Full Bore Isolation Valve – Chrome (WRAS) — full bore version for maximum flow; WRAS approved 15mm Chrome Lever Isolation Valve – Black Handle — CxC compression lever valve; no screwdriver needed 15mm Hot Water Butterfly Ball Valve – Red Handle (WRAS) — full bore butterfly valve for hot water lines 15mm Cold Water Butterfly Ball Valve – Blue Handle (WRAS) — full bore butterfly valve for cold water lines KeyPlumb 15mm Electrolytic Scale Reducer — inline scale reducer to protect valves and appliances from limescale Frequently Asked Questions What is a flat face compression fitting? A flat face compression fitting connects to the pipe using a flat sealing face rather than a traditional olive (ferrule). The pipe end is inserted and the nut is tightened, compressing the flat face against the pipe to create a watertight seal. It is commonly used in isolation valves where a BSP thread outlet is also required, such as this valve for basin mono tap installations. Can I order if the item shows as out of stock? Yes — we can fulfil this product even when stock shows as zero. Place your order as normal and we'll confirm lead time with you. What is the difference between this valve and a standard CxC isolation valve? A standard CxC (compression-to-compression) isolation valve has compression fittings on both ends and is used to isolate a section of pipe. This valve has a flat face compression inlet on one end and a ½" BSP male thread on the other — making it specifically designed to connect a 15mm supply pipe directly to a flexi tail on a basin tap. If you don't need a BSP thread outlet, use the straight CxC isolation valve instead. Will this fit my basin mono tap flexi tail? Yes — provided your flexi tail has a standard ½" BSP female connection (the UK standard for basin mono taps), this valve will connect directly. Check your tap's flexi tail specification if unsure. Is this valve WRAS approved? This valve carries a 1-year manufacturer's guarantee and is suitable for domestic hot and cold water supply. If you specifically require a WRAS-approved valve, please see our WRAS Approved Straight Isolation Valve or WRAS Approved Full Bore Isolation Valve. Can this be used on a hot water supply? Yes — this valve is suitable for both hot and cold water supply lines in standard domestic plumbing applications. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.

  Read more less

  8 in stock 1-3 Days

  £1.25

  View options

• Sale -58%

  View options

  KeyPlumb 15mm Electrolytic Scale Reducer | WRAS Approved | No Chemicals | KPESR15

  3 in stock 1-3 Days

  Protect your entire plumbing system from limescale damage with the KeyPlumb 15mm Electrolytic Scale Reducer (KPESR15). WRAS-approved and completely passive — no chemicals, no filters, no electricity, no ongoing costs. The 15mm compression fitting integrates directly into your cold water rising main, using proven electrolytic technology to prevent scale build-up at the source. Ideal for hard water areas across the UK. Key Features WRAS Approved — certified for use in UK potable (drinking) water systems No Chemicals Required — no salts, additives, or chemical treatments Zero Maintenance — no filters to replace, no ongoing costs; passive system No Power Required — works from water flow alone Whole-House Protection — install on rising main to protect boilers, appliances, and pipework 15mm Compression Fitting — straightforward installation into standard pipework Preserves Water Quality — maintains natural mineral content; no brine discharge Ideal for Hard Water Areas — recommended where calcium carbonate exceeds 200ppm Technical Specification Brand: KeyPlumb SKU / Model: KPESR15 Barcode (EAN): 5056277502186 Size: 15mm compression fitting Technology: Electrolytic scale reduction Certification: WRAS approved Connection Type: Compression fittings (both ends) Maximum Working Pressure: 10 bar Operating Temperature: 5°C to 65°C Power: None required (passive system) Maintenance: None required HS Code: 842121 What’s Included KeyPlumb 15mm electrolytic scale reducer unit 15mm compression fittings (both ends) Installation instructions WRAS certification documentation Frequently Asked Questions How does an electrolytic scale reducer work?As water passes through the unit, the electrolytic process alters the structure of calcium and magnesium minerals so they remain suspended in the water rather than forming hard scale deposits on pipes, heating elements, and appliances. No chemicals or power are required — the reaction is triggered by water flow alone. Where should I install it?Install on the cold water rising main immediately after the stopcock for whole-house protection. This ensures all water entering the property is treated before reaching boilers, appliances, and hot water systems. Professional installation by a qualified plumber is recommended. Is this suitable for drinking water systems?Yes — WRAS approval confirms this unit is safe for use in potable (drinking) water systems and complies with the Water Supply (Water Fittings) Regulations. It does not add chemicals or alter the taste of your water. How is this different from a water softener?Traditional water softeners require regular salt top-ups, produce brine waste, and remove beneficial minerals from the water. This electrolytic unit requires no salt, produces no waste water, maintains natural mineral content, and has no running costs. How long does it last?The electrolytic elements are designed for long-term passive performance, typically 10+ years in normal use, with no servicing or replacement parts required. Can I order if the item shows as out of stock?Yes — we can fulfil this product even when stock shows as zero. Place your order as normal and we’ll confirm lead time with you. For urgent enquiries, call us on 01603 381095. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.

  Read more less

  3 in stock 1-3 Days

  £22.00 £9.30

  View options

• Sale -35%

  View options

  Aqua Elegance Standard Monobloc Kitchen Sink Mixer Tap - Chrome

  Aqua Elegance Monobloc Kitchen Mixer Monobloc kitchen mixer tap. Contemporary styling for modern kitchens. Key Features Monobloc design - single lever operation Kitchen mixer - practical functionality Contemporary styling - modern design Aqua Elegance quality - reliable construction Technical Specification Type: Monobloc kitchen mixer Operation: Single lever Vendor: Aqua Elegance SKU: AE-KM-MONO Perfect for: Modern kitchens requiring monobloc mixer with contemporary styling.

  Read more less

  £39.99 £25.99

  View options

• 

  View options

  Hipkin Mono Basin Mixer Tap – Chrome | Single Lever | XAV802

  Hipkin Mono Basin Mixer Tap – Chrome A clean, contemporary chrome mono basin mixer tap from the Hipkin range. Single lever operation for straightforward temperature and flow control. Deck mounted for standard single tap hole basins. Key Features Single lever operation — simple temperature and flow control Chrome finish — contemporary styling Deck mounted — single tap hole installation Mono mixer design Technical Specification SKU: XAV802 Range: Hipkin Type: Deck Mounted Mono Basin Mixer Tap Handle: Single lever Finish: Chrome Tap Holes Required: 1 Country of Origin: China HS Code: 848180 Frequently Asked Questions Can I order if the item shows as out of stock? Yes — we can accept orders even when stock shows as unavailable. Lead times may vary; please contact us at customerservice@bubblegumbathrooms.co.uk for availability.

  Read more less

  £25.00

  View options

• Sale -53%

  View options

  McAlpine WC-CON8E 90° Extended Inlet Rigid WC Pan Connector – 97-107mm x 110mm

  2 in stock 1-3 Days

  The McAlpine WC-CON8E is a 90° rigid WC pan connector with an extended adjustable inlet — designed for installations where extra reach is needed between the pan spigot and the soil pipe. The adjustable 97–107mm inlet suits all standard WC pan spigots, and the 110mm outlet connects to both PVC-U and cast iron soil pipe. Manufactured in durable polypropylene and compliant with BS 5627:1984 and DIN 1389:2015-12. Key Features 90° bend with extended inlet for greater reach Adjustable length for flexible installation 97–107mm inlet suits all standard WC pan spigots 4″/110mm outlet — fits inside diameter of PVC-U and cast iron soil pipe Durable polypropylene construction Complies with BS 5627:1984 and DIN 1389:2015-12 Technical Specification SKU: WC-CON8E Barcode: 5036484007537 Inlet: 97–107mm (adjustable) Outlet: 4″/110mm Angle: 90° Material: Polypropylene Standards: BS 5627:1984 / DIN 1389:2015-12 Weight: 0.15kg Brand: McAlpine More McAlpine WC Pan Connectors Need a different angle, length, or flexibility? Browse the full McAlpine WC connector range: McAlpine WC-CON2 Straight Adjustable WC Pan Connector – 97-107mm x 110mm McAlpine WC-CON8 90° Bent Pan Connector – 97-107mm x 110mm McAlpine WC-CONQ 90° Space Saving Rigid WC Pan Connector – 97-107mm x 110mm McAlpine F26R Straight Flexible WC Pan Connector 410mm – 97-107mm x 110mm McAlpine F33R Straight Flexible WC Pan Connector 850mm – 97-107mm x 110mm Frequently Asked Questions What makes the WC-CON8E different from the standard WC-CON8? The WC-CON8E has an extended inlet, giving additional reach between the pan spigot and the soil pipe entry point. This makes it ideal where the pan is positioned further from the wall or where standard connectors fall short. What pan spigot sizes does this fit? The adjustable inlet fits all standard WC pan spigots in the 97–107mm range, covering the vast majority of UK toilet pans. What soil pipe does the outlet connect to? The 110mm outlet fits the inside diameter of 4″/110mm PVC-U and cast iron soil pipe — the standard soil pipe size used in UK domestic installations. Is this a rigid or flexible connector? This is a rigid connector. If you need a flexible connector for awkward or offset installations, see our McAlpine F26R or McAlpine F33R flexible connectors. Can I order if the item shows as out of stock? Yes — we can order this product for you even if it shows as out of stock. Lead times may vary; please contact us at customerservice@bubblegumbathrooms.co.uk for availability.

  Read more less

  2 in stock 1-3 Days

  £16.95 £8.00

  View options

• Sale -51%

  View options

  McAlpine WC-CON2 Straight Adjustable Rigid WC Pan Connector – 97-107mm x 110mm

  2 in stock 1-3 Days

  The McAlpine WC-CON2 is a straight adjustable rigid WC pan connector — the go-to choice for standard in-line installations where the pan spigot and soil pipe are directly aligned. The adjustable 97–107mm inlet suits all standard WC pan spigots, and the 110mm outlet is compatible with both PVC-U and cast iron soil pipe. Also available with a 3½″/90mm finned outlet for older soil pipe systems. Manufactured in durable polypropylene and compliant with BS 5627:1984 and DIN 1389:2015-12. Key Features Straight rigid connector — ideal for direct in-line pan-to-soil-pipe installations Adjustable length for flexible positioning 97–107mm inlet suits all standard WC pan spigots 110mm outlet — available with finned end (4″/110mm PVC-U/cast iron) or plain end (110mm soil/underground pipe fittings) Also available with 3½″/90mm finned outlet for older soil pipe systems Durable polypropylene construction Complies with BS 5627:1984 and DIN 1389:2015-12 Technical Specification SKU: WC-CON2 Barcode: 5034684005977 Inlet: 97–107mm (adjustable) Outlet: 110mm (finned or plain end) Type: Straight rigid Material: Polypropylene Standards: BS 5627:1984 / DIN 1389:2015-12 Weight: 0.15kg Brand: McAlpine More McAlpine WC Pan Connectors Need a bend, extra reach, or a flexible connector? Browse the full McAlpine WC connector range: McAlpine WC-CON8 90° Bent Rigid WC Pan Connector – 97-107mm x 110mm McAlpine WC-CON8E 90° Extended Inlet Rigid WC Pan Connector – 97-107mm x 110mm McAlpine WC-CONQ 90° Space Saving Rigid WC Pan Connector – 97-107mm x 110mm McAlpine F26R Straight Flexible WC Pan Connector 410mm – 97-107mm x 110mm McAlpine F33R Straight Flexible WC Pan Connector 850mm – 97-107mm x 110mm Frequently Asked Questions When should I use a straight connector rather than a 90° bent connector? Use a straight connector like the WC-CON2 when the WC pan spigot and the soil pipe entry point are directly in line — i.e. the pan faces straight into the wall. If the soil pipe is offset to the side, you’ll need a 90° connector such as the WC-CON8 or WC-CON8E. What pan spigot sizes does this fit? The adjustable inlet fits all standard WC pan spigots in the 97–107mm range, covering the vast majority of UK toilet pans. What soil pipe does the outlet connect to? The standard 110mm outlet is available with a finned end (for 4″/110mm PVC-U and cast iron soil pipe internal diameters) or a plain end (for 110mm soil or underground pipe fittings). A 3½″/90mm finned outlet version is also available for older soil pipe systems. Is this a rigid or flexible connector? This is a rigid connector. If you need a flexible connector for awkward or offset installations, see our McAlpine F26R or McAlpine F33R flexible connectors. Can I order if the item shows as out of stock? Yes — we can order this product for you even if it shows as out of stock. Lead times may vary; please contact us at customerservice@bubblegumbathrooms.co.uk for availability.

  Read more less

  2 in stock 1-3 Days

  £14.39 £7.00

  View options

• Sale -53%

  View options

  McAlpine WC-CON8 90° Bent Rigid WC Pan Connector – 97-107mm x 110mm

  2 in stock 1-3 Days

  The McAlpine WC-CON8 is a 90° bent rigid WC pan connector with an adjustable length inlet and double seal on the pan connection — delivering a reliable, leak-free fit with all standard WC pan spigots. The 110mm outlet connects to both PVC-U and cast iron soil pipe, making it suitable for the vast majority of UK domestic installations. Manufactured in durable polypropylene and compliant with BS 5627:1984 and DIN 1389:2015-12. Key Features 90° bend — ideal for pans set at right angles to the soil pipe Adjustable length inlet for flexible positioning 97–107mm inlet suits all standard WC pan spigots Double seal on pan connection for a secure, leak-free fit 4″/110mm outlet — available with finned end (PVC-U/cast iron internal diameter) or plain end (110mm soil/underground pipe fittings) Durable polypropylene construction Complies with BS 5627:1984 and DIN 1389:2015-12 Technical Specification SKU: WC-CON8 Barcode: 503484006097 Inlet: 97–107mm (adjustable) Outlet: 4″/110mm Angle: 90° Material: Polypropylene Standards: BS 5627:1984 / DIN 1389:2015-12 Weight: 0.2kg Brand: McAlpine More McAlpine WC Pan Connectors Need a different angle, length, or flexibility? Browse the full McAlpine WC connector range: McAlpine WC-CON2 Straight Adjustable WC Pan Connector – 97-107mm x 110mm McAlpine WC-CON8E 90° Extended Inlet Rigid WC Pan Connector – 97-107mm x 110mm McAlpine WC-CONQ 90° Space Saving Rigid WC Pan Connector – 97-107mm x 110mm McAlpine F26R Straight Flexible WC Pan Connector 410mm – 97-107mm x 110mm McAlpine F33R Straight Flexible WC Pan Connector 850mm – 97-107mm x 110mm Frequently Asked Questions What is the difference between the WC-CON8 and the WC-CON8E? The WC-CON8E has an extended inlet for additional reach between the pan spigot and the soil pipe. If you need extra length, choose the WC-CON8E. For a standard 90° connection, the WC-CON8 is the right choice. What does the double seal do? The double seal on the pan connection creates a more secure, leak-free joint between the connector and the WC pan spigot — reducing the risk of seepage even with minor misalignment during installation. What pan spigot sizes does this fit? The adjustable inlet fits all standard WC pan spigots in the 97–107mm range, covering the vast majority of UK toilet pans. What soil pipe does the outlet connect to? The 110mm outlet is available with a finned end (for 4″/110mm PVC-U and cast iron soil pipe internal diameters) or a plain end (for 110mm soil or underground pipe fittings). Please confirm which outlet type you require before ordering. Can I order if the item shows as out of stock? Yes — we can order this product for you even if it shows as out of stock. Lead times may vary; please contact us at customerservice@bubblegumbathrooms.co.uk for availability.

  Read more less

  2 in stock 1-3 Days

  £17.14 £8.00

  View options

• Sale -64%

  View options

  McAlpine Q10 19mm Shallow Seal Bath Trap | Chrome Multifit Outlet

  3 in stock 1-3 Days

  The McAlpine Q10 is a 19mm shallow seal bath trap with a chrome-plated multifit compression outlet. Designed for installations where a standard 75mm seal depth isn't achievable — such as low-clearance baths — it maintains an effective water seal to prevent drain odours while fitting neatly into tight spaces. Key Features 19mm shallow water seal — ideal where full-depth traps won't fit beneath the bath Universal multifit compression outlet — compatible with 32mm, 36mm, and 40mm plastic, copper, and lead waste pipes Chrome-plated finish — neat appearance where the trap may be partially visible Polypropylene body — lightweight, corrosion-resistant, and long-lasting Hand-tight installation — no tools required; leak-free seals designed for fibreglass and acrylic baths Compatible with McAlpine bath wastes — integrates seamlessly with McAlpine waste systems Technical Specification Model: Q10 Water seal depth: 19mm (shallow seal) Body material: Polypropylene with chrome finish Outlet type: Multifit compression Outlet compatibility: 32mm, 36mm, 40mm waste pipes (plastic, copper, lead) Suitable for: Fibreglass, acrylic, and steel baths Country of Origin: United Kingdom Barcode: 5036484002587 SKU: Q10 More McAlpine Traps McAlpine E10 Shallow Basin Bottle Trap | 1¼" Outlet | 50mm Seal McAlpine AA10 Resealing Bottle Trap | 75mm Seal | Self-Ventilating McAlpine ST90CPB-S-70 Shallow Shower Trap | 90mm | 70mm Height McAlpine ST90CPB-S-53 Shallow Shower Trap | 90mm | 53mm Height McAlpine ST90CB10-70 Shallow Shower Trap | 90mm | 70mm Height Frequently Asked Questions What is a shallow seal trap? A shallow seal trap retains a smaller water seal depth (19mm in this case) compared to a standard trap (75mm). It is used where there is limited space beneath the bath for a full-depth trap, such as with low-profile or freestanding baths with restricted underside clearance. Will this fit my bath waste? The Q10 uses a multifit compression outlet compatible with 32mm, 36mm, and 40mm waste pipes. It is designed to work with McAlpine bath wastes and most standard bath waste fittings. Check your existing waste outlet size before ordering. Is this suitable for acrylic baths? Yes — the Q10's seals are specifically designed to create a leak-free connection with fibreglass and acrylic bath surfaces, as well as steel baths. Can I order if the item shows as out of stock? Yes — most items can still be ordered when showing as out of stock. Lead times may vary. Contact us at customerservice@bubblegumbathrooms.co.uk or call 01603 381095 before ordering if you need a specific delivery date.

  Read more less

  3 in stock 1-3 Days

  £16.84 £6.00

  View options

• Sale -65%

  View options

  McAlpine E10 Shallow Basin Bottle Trap | 1¼" Outlet | 50mm Seal | White

  3 in stock 1-3 Days

  The McAlpine E10 is a shallow basin bottle trap designed for installations where space beneath the basin is limited. Its compact profile makes it ideal for wall-hung basins, vanity units with restricted clearance, and cloakroom sinks — while still providing a reliable 50mm water seal to prevent sewer gases and odours from entering the bathroom. Key Features Shallow compact design — fits where standard bottle traps cannot; ideal for wall-hung basins and fitted vanity units 50mm water seal — effective odour barrier; maintains seal even during periods of non-use 1¼" (32mm) multifit compression outlet — compatible with plastic, copper, and lead waste pipes White polypropylene construction — corrosion and chemical resistant; smooth internal surfaces for optimal flow BS EN 274-1:2002 compliant — meets British and European performance standards Precision-moulded threads — prevent cross-threading during installation Technical Specification Model E10 Type Shallow basin bottle trap Water Seal 50mm Outlet Size 1¼" (32mm) Outlet Type Multifit compression Material Polypropylene Colour White Pipe Compatibility Plastic, copper, lead Standard BS EN 274-1:2002 Weight 0.15kg Brand McAlpine You May Also Need Basin Wastes — Click-clack, pop-up, and slotted basin wastes Basins — Browse our full basin range All Wastes & Drainage — Bath wastes, shower wastes, and traps Frequently Asked Questions What is the difference between a shallow and standard bottle trap? A standard bottle trap has a deeper body to accommodate the water seal. A shallow bottle trap achieves the same 50mm water seal in a more compact housing — making it suitable for installations where there is limited clearance beneath the basin, such as wall-hung basins or fitted vanity units with a high base. Can I order if the item shows as out of stock? Yes — this product can be ordered even when showing as out of stock, and we'll fulfil your order as soon as stock is available. If you need a specific delivery timeframe, please contact us at customerservice@bubblegumbathrooms.co.uk before ordering.

  Read more less

  3 in stock 1-3 Days

  £16.95 £6.00

  View options

• Sale -41%

  View options

  McAlpine ST90CPB-S-70 Shallow Shower Trap – 90mm | 70mm Height | 50mm Seal

  5 in stock 1-3 Days

  The McAlpine ST90CPB-S-70 is a shallow shower trap engineered for low-profile installations where sub-floor clearance is limited. At 70mm overall height with a superior 50mm water seal and 34 litre/min flow rate, it delivers full performance in space-constrained applications — ideal for timber floor constructions, low-profile shower trays, and bathroom renovation projects. The 1½″ BSP solvent weld outlet connects to standard 40mm waste pipework, and the polypropylene body is fully compliant with BS EN 274-1:2002 and BS EN 274-2:2002. ⚠️ Check tray thickness and clearance before ordering. The ST90CPB-S-70 suits tray thickness 5–30mm and requires 70mm clearance beneath the tray. If your tray is 0–23mm thick and you need a Multifit outlet, see the McAlpine ST90CB10-70. If you have less than 70mm clearance, see the McAlpine ST90CPB-S-53 (53mm height). Key Features 70mm overall height — suitable for low-profile installations with restricted sub-floor depth 50mm water seal — superior odour protection; well above the minimum 25mm requirement 34 litres/min flow rate — high drainage performance; prevents water pooling 90mm waste hole — fits standard shower trays with 90mm waste apertures Suits tray thickness 5–30mm 1½″ BSP solvent weld outlet — connects to standard 40mm waste pipework Removable 110mm flange — easy cleaning without disturbing the trap body Complete installation kit — 135° bend, BSP coupling nut, and 1½″ universal connector included Polypropylene construction — durable and corrosion resistant BS EN 274 compliant — tested to BS EN 274-1:2002 and BS EN 274-2:2002 Technical Specification Brand: McAlpine Model: ST90CPB-S-70 SKU: ST90CPB-S-70 EAN: 5036484043870 Type: Shallow shower trap Waste hole diameter: 90mm Overall height: 70mm Under-tray clearance required: 70mm Suitable tray thickness: 5–30mm Water seal depth: 50mm Flow rate: 34 litres/min (tested under 15mm constant head, BS EN 274-2:2002) Thread size: 1½″ BSP Outlet: 1½″ solvent weld Flange diameter: 110mm (removable) Body material: Polypropylene Weight: 0.35kg Country of Origin: United Kingdom Standards: BS EN 274-1:2002 & BS EN 274-2:2002 What's Included McAlpine ST90CPB-S-70 shallow shower trap body 110mm removable flange 135° bend BSP coupling nut 1½″ universal connector Installation instructions Also Available — McAlpine Shallow Shower Traps McAlpine ST90CB10-70 — 90mm, 70mm Height, 50mm Seal, Multifit Outlet — suits tray thickness 0–23mm; Multifit outlet for plastic, copper & lead pipe McAlpine ST90CPB-S-53 — 90mm, 53mm Height, 25mm Seal — for severely restricted clearance where 70mm is not available Coordinate Your Shower Installation Shower Trays — browse compatible low profile trays Shower Enclosures — complete your shower installation Shower Valves & Accessories — valves, heads, and arms Frequently Asked Questions What is the difference between the ST90CPB-S-70 and the ST90CB10-70? Both are McAlpine 90mm shallow traps with 70mm height, 50mm water seal, and 34L/min flow rate. The key difference is tray thickness compatibility and outlet type. The ST90CPB-S-70 (this product) suits tray thickness 5–30mm and has a 1½″ solvent weld outlet. The ST90CB10-70 suits tray thickness 0–23mm and has a Multifit outlet compatible with plastic, copper, and lead pipe. Check your tray thickness and pipework type before ordering. What clearance does this trap require beneath the shower tray? The ST90CPB-S-70 has an overall height of 70mm and requires 70mm of clearance beneath the shower tray. Measure the available depth between the underside of your shower tray and the floor before ordering. If you have less than 70mm available, see the McAlpine ST90CPB-S-53 (53mm height). What tray thickness is this trap suitable for? The ST90CPB-S-70 suits shower trays with a thickness of 5–30mm. If your tray is thinner (0–23mm), the ST90CB10-70 may be more appropriate — check the overlap range for your specific tray thickness. What type of outlet connection does this trap use? The outlet is 1½″ BSP solvent weld, connecting to standard 40mm (1½″) solvent weld waste pipe. A 135° bend, BSP coupling nut, and 1½″ universal connector are included to allow flexible pipe routing beneath the tray. What is the water seal depth, and why does it matter? The water seal depth is 50mm. The water seal is the depth of water retained in the trap that prevents sewer gases from entering the bathroom. The minimum required by UK building regulations is 25mm. A 50mm seal provides significantly better odour protection and is less likely to evaporate in infrequently used showers. If clearance is too restricted for this trap, the ST90CPB-S-53 offers a 25mm seal at just 53mm height. Is this trap BS EN 274 compliant? Yes — the McAlpine ST90CPB-S-70 is fully compliant with BS EN 274-1:2002 (requirements) and BS EN 274-2:2002 (test methods), the relevant British and European standard for sanitary waste fittings. Can I order if the item shows as out of stock? Yes — this product is available to order even when stock shows as zero. Please allow additional lead time and contact us at customerservice@bubblegumbathrooms.co.uk for availability. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.

  Read more less

  5 in stock 1-3 Days

  £59.00 £34.99

  View options

Back to top