Internal collection for managing postage rates for small products.
Small Items - Postage
-
Isolating Radiator Tail 15mm x ½" BSP – Pair | Remove Radiators Without Draining | Patented
Decorating a room? Replacing a radiator? Normally that means draining the system, dealing with dirty water, and refilling and re-pressurising the boiler afterwards. With these patented Isolating Radiator Tails, you don’t. Fit them once between the radiator and the valve, and from that point on you can remove the radiator in minutes — no draining, no mess, no water waste, no boiler interference. A genuinely clever solution to one of the most frustrating jobs in domestic heating.Sold as a pair (one for each end of the radiator). Fits standard 15mm x ½" BSP radiator valve connections.Key Features Patented Isolating Design — allows the radiator to be removed and refitted without draining the heating system No System Drainage Required — eliminates the need to drain, refill, and re-pressurise the boiler when removing a radiator Fits in Minutes — installs between the existing radiator valve and the radiator tail; no specialist tools required 15mm x ½" BSP — standard connection size compatible with all conventional UK radiator valve installations Sold as a Pair — one tail for each end of the radiator; everything you need for one radiator Suitable for All Standard Radiators — compatible with new builds and existing heating systems Protects Boiler Warranty — avoids the pressure fluctuations and air ingress associated with draining and refilling Eco-Friendly — no water waste from system drainage; no inhibitor top-up required after refitting Time-Saving for Decorators & Plumbers — dramatically reduces the time and disruption of radiator removal jobs How It WorksThe isolating radiator tail fits between your existing radiator valve and the radiator itself. Once installed, it incorporates an internal isolation mechanism that allows you to close off the flow at the tail before disconnecting the radiator — trapping the water in the system rather than releasing it. When you’re ready to refit the radiator, reconnect and reopen. The system stays pressurised and full throughout.Technical Specification Connection Size 15mm x ½" BSP Quantity Pair (2 tails per pack) Design Patented Isolating Valve Compatibility All standard UK radiator valve installations Application Radiator removal without system drainage SKU K96882 EAN 5033696467500 Alt. Part Numbers QBBL650 | 19TD368354 | 368354 Brand Hipkin Complete Your Radiator Installation Crosshead Chrome Radiator Valves – Straight & Angled | 15mm | Pair — classic crosshead chrome valves for traditional radiator installations Kartell Modern Angled Radiator Valves 15mm — contemporary angled radiator valves in brass construction Kartell Anthracite Angled Radiator Valve 15mm — premium anthracite finish angled valve for designer radiators Kartell Matt Black Twin TRV + Lockshield Pack — designer matt black thermostatic radiator valve set Chrome Radiator Valve Pipe Sleeve Kit — pipe sleeves and floor plates for a neat, professional valve finish Honeywell Valencia TRV Lockshield 15mm Angled — thermostatic radiator valve lockshield for temperature control Frequently Asked QuestionsDo I really not need to drain the system to remove a radiator?Correct — that’s the whole point of the patented design. Once the isolating tails are fitted, you close them off before disconnecting the radiator. The water stays in the system. You can remove the radiator, decorate, and refit it without touching the boiler pressure or losing any system water.Can I order if the item shows as out of stock?Yes — we can fulfil this product even when stock shows as zero. Place your order as normal and we’ll confirm lead time with you.Will these fit my existing radiator valves?These tails use a standard 15mm x ½" BSP connection — the most common radiator valve connection size in UK domestic heating systems. They are compatible with all standard radiator valve installations, both new builds and existing systems.Do I need a plumber to fit these?The tails are designed to be straightforward to install. A competent DIYer can fit them, though we always recommend a qualified plumber for any work on a sealed heating system to ensure compliance with building regulations and to protect boiler warranties.How many tails do I need per radiator?Two — one for each end of the radiator (flow and return). This product is sold as a pair, so one pack covers one radiator.Will fitting these affect my boiler warranty?The isolating tails are designed to protect boiler warranties by avoiding the pressure fluctuations, air ingress, and inhibitor dilution that occur when a system is drained and refilled. Always check your specific boiler warranty terms if in doubt.
£20.00 £12.00
-
15mm Straight Isolation Valve – Chrome Plated | WRAS Approved | CxC Compression | KeyPlumb
The valve behind the basin. The one under the sink. The one that lets you change a tap washer without turning off the water to the whole house. The KeyPlumb 15mm Straight Isolation Valve is a fundamental plumbing component — compact, chrome-plated, WRAS approved, and built to sit quietly in place for years until the moment it’s needed. A flathead screwdriver is all it takes to isolate any individual fixture. Available as a single valve or pack of 10 for trade use. Key Features WRAS Approved — independently certified for use on mains potable water supplies; meets UK Water Supply (Water Fittings) Regulations Straight Pattern — inline configuration for direct pipe runs; ideal for basin, tap, and fixture isolation Screwdriver Slot Operation — quarter-turn flathead screwdriver; tamper-resistant and compact in tight spaces behind basins and under sinks Chrome-Plated Finish — corrosion-resistant, professional appearance; suits exposed installations CxC Compression Fittings — compression-to-compression connection both ends; compatible with standard 15mm copper and plastic pipe 15mm Size — the standard domestic pipe size for basin, tap, toilet, and appliance supply lines Hot & Cold Water — suitable for all standard domestic hot and cold water supply applications Single or Pack of 10 — buy what you need; pack of 10 offers the best per-unit value for trade use Technical Specification Size 15mm Pattern Straight (inline) Connection Type Compression to Compression (CxC) Operation Screwdriver Slot (quarter-turn) Finish Chrome Plated Application Hot & Cold Water, Basin, Tap & Fixture Isolation Approvals WRAS Approved SKU (Single) K06926 SKU (x10) K06926 x10 Alt. Part Numbers KPISO15 | 502CP Brand KeyPlumb Complete Your Valve Range KeyPlumb 15mm Full Bore Isolation Valve – Chrome (WRAS) — full bore version for maximum flow; ideal where flow rate matters 15mm Chrome Isolation Valve – Flat Face Compression — flat face compression with ½” BSP thread for specific fitting types 15mm Chrome Lever Isolation Valve – Black Handle — CxC compression lever valve with contemporary black handle; no screwdriver needed 15mm Hot Water Butterfly Ball Valve – Red Handle (WRAS) — full bore butterfly valve for hot water lines; quarter-turn lever 15mm Cold Water Butterfly Ball Valve – Blue Handle (WRAS) — full bore butterfly valve for cold water lines; quarter-turn lever KeyPlumb 15mm Electrolytic Scale Reducer — inline scale reducer to protect valves and appliances from limescale Frequently Asked Questions What is a straight isolation valve used for? A straight isolation valve is fitted inline on a water supply pipe to allow a single fixture — such as a basin tap, toilet cistern, or kitchen tap — to be isolated for maintenance or replacement without turning off the water supply to the whole property. It’s one of the most commonly fitted plumbing components in domestic installations. Can I order if the item shows as out of stock? Yes — we can fulfil this product even when stock shows as zero. Place your order as normal and we’ll confirm lead time with you. What is the difference between a straight and angled isolation valve? A straight (inline) valve is used where the pipe runs directly to the fixture — the valve sits in the pipe run without changing direction. An angled valve (90°) is used where the pipe comes up from the floor or out from the wall and needs to turn before connecting to the fixture. Choose based on your pipe configuration. How do I operate a screwdriver slot isolation valve? Use a standard flathead screwdriver. When the slot is parallel to the pipe, the valve is open. When the slot is perpendicular (across) the pipe, the valve is closed. It’s a quarter-turn (90°) operation — fast and positive. Does this work with plastic pipe as well as copper? This valve uses standard CxC compression fittings, compatible with 15mm copper pipe. For plastic pipe, use the appropriate insert/liner within the compression fitting to prevent the olive from crushing the pipe wall. Why buy the pack of 10? At £1.05 per valve versus £1.20 individually, the pack of 10 saves 12.5% per valve — ideal for trade use, full bathroom or kitchen fits, or keeping a stock of spares. The compare-at price reflects the full single-unit cost across 10 valves.
£1.20 - £10.50
-
15mm Full Bore Isolation Valve – Chrome Plated Brass | WRAS Approved | Screwdriver Slot | KeyPlumb
The workhorse of the isolation valve world. The KeyPlumb 15mm Full Bore Isolation Valve is the valve you fit and forget — tucked neatly behind a basin, under a sink, or inline on a supply pipe, ready to do its job when you need it. A screwdriver slot keeps it tamper-resistant and compact in tight spaces, while the full bore design ensures zero flow restriction when open. Chrome-plated brass construction, WRAS approval, and EN1254-2 compression fittings on both ends make this a specification-grade valve at a trade-friendly price. Available in packs of 1, 5, or 10. Key Features WRAS Approved — independently tested and certified for use on mains potable water supplies; meets UK Water Supply (Water Fittings) Regulations Full Bore Design — unrestricted 15mm flow path when open; no pressure drop or flow restriction Screwdriver Slot Operation — quarter-turn flathead screwdriver operation; tamper-resistant and compact for tight spaces Chrome-Plated Brass Body — nickel-plated brass with chrome finish; corrosion-resistant and professional in appearance EN1254-2 Compression Fittings — standard compression connections both ends; compatible with 15mm copper and plastic pipe 10 Bar Rated — maximum operating pressure well above typical UK mains (3–5 bar) Up to 95°C — suitable for hot and cold water systems and heating circuits Hot & Cold Water — suitable for all standard domestic plumbing and heating applications Available in Packs of 1, 5 or 10 — better per-unit value at higher quantities; ideal for trade use Technical Specification Size 15mm Connection Type EN1254-2 Compression (both ends) Valve Type Full Bore Isolation Valve Operation Screwdriver Slot (quarter-turn) Body Material Nickel-Plated Brass Finish Chrome Plated Max Working Pressure 10 bar (145 psi) Max Working Temperature 95°C Application Hot & Cold Water, Heating Systems Approvals WRAS Approved, EN1254-2 SKU (x1) K06922 SKU (x5) K06922 x5 SKU (x10) K06922 x10 Alt. Part Numbers KPFBISO15 | 1003CP Brand KeyPlumb Complete Your Valve Range Straight Isolation Valve – Chrome 15mm (WRAS) — straight-pattern chrome isolation valve; WRAS approved 15mm Chrome Isolation Valve – Flat Face Compression — flat face compression with ½” BSP thread 15mm Hot Water Butterfly Ball Valve – Red Handle (WRAS) — quarter-turn lever butterfly valve for hot water lines 15mm Cold Water Butterfly Ball Valve – Blue Handle (WRAS) — quarter-turn lever butterfly valve for cold water lines 15mm Chrome Lever Isolation Valve – Black Handle — CxC compression lever valve with contemporary black handle KeyPlumb 15mm Electrolytic Scale Reducer — inline scale reducer to protect valves and appliances from limescale Frequently Asked Questions What is the difference between a full bore and standard bore isolation valve? A full bore valve maintains the same internal diameter as the connected pipework (15mm), so there is no restriction to flow when the valve is open. A standard bore valve has a reduced internal diameter which can restrict flow and cause a pressure drop. For applications where flow rate matters — showers, baths, washing machines — always choose full bore. Can I order if the item shows as out of stock? Yes — we can fulfil this product even when stock shows as zero. Place your order as normal and we’ll confirm lead time with you. How do I operate a screwdriver slot isolation valve? Use a standard flathead screwdriver. When the slot is parallel to the pipe, the valve is open. When the slot is perpendicular (across) the pipe, the valve is closed. It’s a quarter-turn (90°) operation. Is this valve suitable for heating systems? Yes — the 95°C maximum temperature rating makes this valve suitable for heating system pipework, including radiator isolation and boiler connections, within standard domestic operating temperatures. Does this work with plastic pipe as well as copper? This valve uses EN1254-2 compression fittings, compatible with 15mm copper pipe. For plastic pipe, use the appropriate insert/liner within the compression fitting to prevent the olive from crushing the pipe wall. Why buy a pack of 10? The pack of 10 offers the best per-unit price at £2.90 per valve versus £3.50 individually — a saving of 17% per valve. Ideal for trade use, full property fits, or keeping a stock of spares on the van.
£3.50 - £29.00
-
15mm Cold Water Butterfly Ball Valve – WRAS Approved | Blue Handle | Full Bore | KeyPlumb
The cold water companion to the red handle hot water valve — same proven full-bore butterfly design, same WRAS approval, same quarter-turn simplicity. The KeyPlumb 15mm Cold Water Butterfly Ball Valve features a blue handle for instant cold water identification, eliminating any risk of confusion during installation or maintenance. Nickel-plated brass construction, PN25 pressure rating, and BS EN331 compliance make this a valve you can specify with confidence. Available in packs of 1, 2, or 5. Key Features WRAS Approved — meets UK Water Regulations Advisory Scheme requirements; suitable for use on mains potable water supplies BS EN331 Compliant — manufactured to the European standard for ball valves Blue Handle — universally recognised cold water identification; industry-standard colour coding (blue = cold, red = hot) Full Bore Design — unrestricted flow path; no pressure drop or flow restriction when fully open Quarter-Turn Operation — fast, positive 90° open/close; lever position gives instant visual confirmation of valve state Nickel-Plated Brass Body — corrosion-resistant construction for long-term reliability 15mm Compression Fitting — compatible with standard UK 15mm copper and plastic pipe systems PN25 Rated — 25 bar working pressure; well above typical UK mains pressure Temperature Range −10°C to +85°C — suitable for all cold water and low-temperature applications Available in Packs of 1, 2 or 5 — buy the quantity you need at a better per-unit price Technical Specification Size 15mm Connection Type Compression (both ends) Valve Type Butterfly Ball Valve Bore Full Bore Operation Quarter-Turn Lever (90°) Handle Colour Blue (Cold Water) Body Material Nickel-Plated Brass Working Pressure PN25 (25 bar) Temperature Range −10°C to +85°C Approvals WRAS Approved, BS EN331 SKU (x1) K55582 SKU (x2) K55582*2 SKU (x5) K55582*5 Brand KeyPlumb Complete Your Valve Range 15mm Hot Water Butterfly Ball Valve – Red Handle (WRAS) — the matching hot water companion; identical spec with red handle identification KeyPlumb 15mm Full Bore Isolation Valve – Chrome (WRAS) — chrome-plated brass isolation valve for a smarter finish Straight Isolation Valve – Chrome 15mm (WRAS) — straight-pattern WRAS approved chrome isolation valve 15mm Chrome Isolation Valve – Flat Face Compression — flat face compression with ½” BSP thread 15mm Chrome Lever Isolation Valve – Black Handle — CxC compression lever valve with contemporary black handle KeyPlumb 15mm Electrolytic Scale Reducer — inline scale reducer to protect valves and appliances from limescale Frequently Asked Questions What is the difference between the blue and red handle versions? The blue handle version (this product) is for cold water lines; the red handle version is for hot water lines. Both are identical in specification — the colour coding is a standard plumbing convention to prevent confusion during installation and maintenance. Can I order if the item shows as out of stock? Yes — we can fulfil this product even when stock shows as zero. Place your order as normal and we’ll confirm lead time with you. Is this valve suitable for mains pressure systems? Yes — the valve is rated to PN25 (25 bar), well above typical UK mains pressure of 3–5 bar. It is WRAS approved for use on mains potable water supplies. Does this work with plastic pipe as well as copper? This valve uses a standard 15mm compression fitting, compatible with 15mm copper pipe. For plastic pipe, use the appropriate insert/liner within the compression fitting to prevent the olive from crushing the pipe wall. Can this valve be used on a hot water supply? Technically yes — the temperature rating of −10°C to +85°C covers most domestic hot water temperatures. However, for hot water lines we recommend the red handle version to maintain correct colour coding and avoid confusion. Why buy a pack of 5? The pack of 5 offers a better per-unit price and is ideal for trade use, full bathroom or kitchen fits, or keeping spares on hand. The saving per valve increases significantly at the 5-pack quantity.
£4.50 - £19.00
-
15mm Hot Water Butterfly Ball Valve – WRAS Approved | Red Handle | Full Bore | KeyPlumb
When you need to isolate a hot water supply quickly and confidently, the colour of the handle matters. The KeyPlumb 15mm Hot Water Butterfly Ball Valve features a red handle — the universally recognised identifier for hot water lines — so there’s never any ambiguity during installation, maintenance, or an emergency shut-off. A single quarter-turn is all it takes to go from fully open to fully closed. WRAS approved and BS EN331 compliant, this is a valve you can fit and forget. Available in packs of 1, 2, or 5 — ideal whether you’re doing a single tap replacement or fitting out a full bathroom or kitchen. Key Features WRAS Approved — meets UK Water Regulations Advisory Scheme requirements; suitable for use on mains water supplies BS EN331 Compliant — manufactured to the European standard for ball valves for gas and other fluids Red Handle — universally recognised hot water identification; eliminates confusion between hot and cold supplies Full Bore Design — unrestricted flow path maintains system pressure and flow rate Quarter-Turn Operation — fast, positive open/close action; handle position gives instant visual confirmation of valve state Nickel-Plated Brass Body — corrosion-resistant construction for long-term reliability in hot water systems 15mm Compression Fitting — compatible with standard UK 15mm copper and plastic pipe systems PN25 Rated — working pressure up to 25 bar; suitable for all standard domestic and commercial plumbing applications Temperature Range −10°C to +85°C — suitable for hot and cold water systems Available in Packs of 1, 2 or 5 — buy the quantity you need at a better per-unit price Technical Specification Size 15mm Connection Type Compression Valve Type Butterfly Ball Valve Bore Full Bore Operation Quarter-Turn Lever Handle Colour Red (Hot Water) Body Material Nickel-Plated Brass Working Pressure PN25 (25 bar) Temperature Range −10°C to +85°C Approvals WRAS Approved, BS EN331 SKU (x1) K55581 SKU (x2) K55581*2 SKU (x5) K55581*5 Brand KeyPlumb Complete Your Valve Range 15mm Cold Water Butterfly Ball Valve – Blue Handle — the matching cold water companion; WRAS approved, same full bore design KeyPlumb 15mm Full Bore Isolation Valve – Chrome — chrome-plated brass isolation valve, WRAS approved, for a smarter finish Straight Isolation Valve – Chrome 15mm (WRAS) — straight-pattern chrome isolation valve for tight spaces 15mm Chrome Isolation Valve – Flat Face Compression — flat face compression fitting with ½” BSP thread 15mm Chrome Lever Isolation Valve – Black Handle — CxC compression lever valve with contemporary black handle KeyPlumb 15mm Electrolytic Scale Reducer — inline scale reducer for 15mm pipework; protects valves and appliances from limescale Frequently Asked Questions What is the difference between the red and blue handle versions? The red handle version (this product) is for hot water lines; the blue handle version is for cold water lines. Both are identical in specification — the colour coding is a standard plumbing convention to prevent confusion during installation and maintenance. Can I order if the item shows as out of stock? Yes — we can fulfil this product even when stock shows as zero. Place your order as normal and we’ll confirm lead time with you. Is this valve suitable for mains pressure systems? Yes — the valve is rated to PN25 (25 bar working pressure), which is well above typical UK mains pressure. It is WRAS approved for use on mains water supplies. Does this work with plastic (push-fit) pipe as well as copper? This valve uses a standard 15mm compression fitting. It is compatible with 15mm copper pipe. For use with plastic pipe, ensure you use the appropriate insert/liner within the compression fitting. If in doubt, contact us for advice. Why buy a pack of 5? The pack of 5 offers a better per-unit price and is ideal for trade use, full bathroom or kitchen fits, or keeping spares on hand. The per-valve cost reduces significantly at the 5-pack quantity. Is professional installation required? While this valve is straightforward to install for a competent DIYer, we recommend professional installation to ensure compliance with building regulations and to maintain any relevant warranties on connected appliances.
£6.00 - £25.00
-
15mm Chrome Lever Isolation Valve – Black Lever Handle | CxC Compression | KeyPlumb
A clean chrome body, a sharp black lever — this is an isolation valve that does its job without looking like an afterthought. The KeyPlumb 15mm Chrome Lever Isolation Valve uses a compression-to-compression (CxC) fitting for straightforward installation on standard 15mm pipework, and a quarter-turn black lever for fast, positive shut-off. Whether you’re isolating a tap, toilet, washing machine, or shower, one turn is all it takes. Available in packs of 1, 2, or 10 — ideal for single jobs or trade use. Key Features Chrome-Plated Brass Body — corrosion-resistant construction with a polished finish that complements modern bathroom and kitchen fittings Black Lever Handle — contemporary styling with a positive grip; lever position gives instant visual confirmation of open/closed state Quarter-Turn Operation — fast, decisive shut-off; 90° from fully open to fully closed CxC Compression Fitting — compression-to-compression connection; compatible with standard 15mm copper and plastic pipe 15mm Size — the most common domestic pipe size; suits taps, toilets, showers, washing machines, and more Suitable for Hot & Cold Water — works across all standard domestic water supply applications Available in Packs of 1, 2 or 10 — buy the quantity you need; better per-unit value at higher quantities Technical Specification Size 15mm Connection Type Compression to Compression (CxC) Valve Type Lever Isolation Valve Operation Quarter-Turn Lever Handle Colour Black Body Finish Chrome-Plated Brass Application Hot & Cold Water Systems SKU (x1) K06927 SKU (x2) K06927*2 SKU (x10) K06927*10 Brand KeyPlumb Complete Your Valve Range 15mm Hot Water Butterfly Ball Valve – Red Handle (WRAS) — WRAS approved butterfly ball valve for hot water lines; full bore, PN25 rated 15mm Cold Water Butterfly Ball Valve – Blue Handle (WRAS) — matching cold water butterfly valve; WRAS approved KeyPlumb 15mm Full Bore Isolation Valve – Chrome (WRAS) — WRAS approved full bore chrome isolation valve Straight Isolation Valve – Chrome 15mm (WRAS) — straight-pattern WRAS approved chrome isolation valve 15mm Chrome Isolation Valve – Flat Face Compression — flat face compression with ½” BSP thread KeyPlumb 15mm Electrolytic Scale Reducer — inline scale reducer to protect valves and appliances from limescale build-up Frequently Asked Questions Is this valve WRAS approved? This valve is compliant with UK plumbing standards for domestic use. If you specifically require a WRAS-approved valve for mains water supply applications, please see our KeyPlumb 15mm Full Bore Isolation Valve (WRAS Approved) or the WRAS Approved Butterfly Ball Valves. Can I order if the item shows as out of stock? Yes — we can fulfil this product even when stock shows as zero. Place your order as normal and we’ll confirm lead time with you. Does this work with plastic (push-fit) pipe? This valve uses a standard 15mm compression fitting. It is compatible with 15mm copper pipe. For use with plastic pipe, ensure you use the appropriate insert/liner within the compression fitting to prevent the olive from crushing the pipe. What is the difference between CxC and a flat-face compression valve? CxC (compression-to-compression) means both ends of the valve accept a standard olive-and-nut compression fitting — the most common type in UK domestic plumbing. A flat-face compression valve has a different end connection designed for specific fittings. For most standard installations, CxC is the correct choice. Why buy a pack of 10? The pack of 10 offers the best per-unit price and is ideal for trade use, full bathroom or kitchen fits, or keeping a stock of spares. At £1.50 per valve in the 10-pack versus £1.65 individually, the saving adds up quickly across a full job. Can this valve be used on a hot water supply? Yes — this valve is suitable for both hot and cold water systems in standard domestic plumbing applications.
£1.65 - £15.00
-
Kartell Spring Loaded Bottom Shower Wheel – 23mm | Genuine Replacement Part
Kartell Spring Loaded Bottom Shower Wheel – 23mm | Genuine Replacement Part Restore smooth, effortless sliding to your Kartell shower door with this genuine Kartell replacement bottom shower wheel. Featuring a spring-loaded mechanism and precision 304 stainless steel micro-bearing, this later-model wheel delivers consistent, reliable performance. Available individually or in money-saving sets of 2 or 4. ⚠️ Compatibility note: This is the later version with a rounded top edge. Earlier versions had a square top edge and are not compatible. Please check the dimensions below and compare with your existing wheel before ordering. If unsure, send us a photo and we’ll confirm fitment. Key Features Genuine Kartell replacement part — designed for Kartell sliding doors and quadrant enclosures (later models) Spring-loaded mechanism — ensures consistent, smooth door operation 304 stainless steel micro-bearing — precision engineered for smooth, long-lasting glide Brass pivot — corrosion-resistant, rust-free in wet environments Chrome finish Available as single, set of 2, or set of 4 Technical Specification Wheel Diameter (A): 23mm Wheel Thickness (B): 6mm Glass Hole Diameter (C): 11.3mm Glass Thickness (D): 4–6mm Centre to Edge Distance (E): 19mm Glass to Wheel Distance (F): 19mm Wheel Body: High-grade plastic Bearing: 304 stainless steel micro-bearing Pivot: Brass Finish: Chrome Mechanism: Spring-loaded Brand: Kartell SKU: SWSP-1 (single) / SWSP x2 (pair) / SWSP x4 (set of 4) Frequently Asked Questions How do I know if this wheel fits my shower? This wheel fits Kartell sliding shower doors and quadrant enclosures — later models only (rounded top edge). Compare the dimensions above with your existing wheel. If you’re unsure, send us a photo of your current wheel to customerservice@bubblegumbathrooms.co.uk and we’ll confirm compatibility. How many wheels do I need? Most sliding shower doors use 2 bottom wheels (one per door panel). If you have a quadrant with two sliding panels, you may need 4. We recommend checking your existing setup before ordering — our set of 2 and set of 4 options offer a saving over buying individually. Is this a genuine Kartell part? Yes — this is a genuine Kartell replacement spare part, designed specifically for Kartell sliding shower enclosures. Can I order if the item shows as out of stock? Yes — we can still accept your order even if the item shows as out of stock. We will fulfil it as soon as stock becomes available. If you have any questions about lead times, please contact us at customerservice@bubblegumbathrooms.co.uk. Do you need help choosing? Our team is happy to help. Get in touch at customerservice@bubblegumbathrooms.co.uk and we’ll advise on the best option for your shower.
£7.00 - £25.00
-
Patterned Chrome Radiator Valves
Add a decorative finishing touch to your radiator with the Patterned Chrome Radiator Valves. Supplied as a pair with 15mm connectors, these valves combine practical flow control with an ornate patterned design that elevates any traditional or transitional bathroom. Available in straight, angled, and corner configurations to suit your pipework layout. Key Features Decorative patterned design Chrome finish Supplied as a pair 15mm connectors Available in straight, angled & corner Suitable for central heating systems Technical Specification Brand: Aqua Elegance Finish: Chrome Connection: 15mm Supply: Pair Configurations: Straight, Angled, Corner Country of Origin: China Also Available In These valves are available in a range of finishes to match your bathroom scheme: Patterned Brushed Brass Radiator Valves Patterned Brushed Bronze Radiator Valves Frequently Asked Questions Are these valves supplied as a pair? Yes — these valves are supplied as a pair, including both the flow and lockshield valves with 15mm connectors. Can I order if the item shows as out of stock? Yes — you can still place your order even if this item shows as out of stock. We will contact you with an estimated lead time once your order is placed.
£19.00 - £35.00
-
Patterned Brushed Brass Radiator Valves
Patterned Brushed Brass Radiator Valves - Pair These patterned brushed brass radiator valves combine contemporary styling with reliable functionality for central heating systems. Supplied as a pair with 15mm connector size, these valves deliver quality performance with a sophisticated brushed brass finish that complements modern and traditional interiors. Key Features Brushed brass finish - sophisticated, warm appearance Patterned design - decorative detailing Packed as a pair - complete valve set 15mm connector size - standard fitting Compact dimensions - H 100 x W 50 x D 50mm Central heating compatible - suitable for most systems 1 year guarantee - manufacturer warranty Technical Specification Dimensions: H 100mm x W 50mm x D 50mm Finish: Brushed brass Design: Patterned Connector size: 15mm Pack quantity: Pair (2 valves) Compatibility: Central heating systems SKU: BGBP107159 Vendor: Aqua Elegance Warranty: 1 year Perfect for: Central heating radiator installations requiring stylish patterned brushed brass valves with standard 15mm connections.
£30.00 - £39.00
-
Patterned Brushed Bronze Radiator Valves
Patterned Brushed Bronze Radiator Valves - Pair These patterned brushed bronze radiator valves combine contemporary styling with reliable functionality for central heating systems. Supplied as a pair with 15mm connector size, these valves deliver quality performance with a sophisticated brushed bronze finish that complements modern and traditional interiors. Key Features Brushed bronze finish - sophisticated, warm appearance Patterned design - decorative detailing Packed as a pair - complete valve set 15mm connector size - standard fitting Central heating compatible - suitable for most systems 1 year guarantee - manufacturer warranty Technical Specification Finish: Brushed bronze Design: Patterned Connector size: 15mm Pack quantity: Pair (2 valves) Compatibility: Central heating systems SKU: BGBP108856 Vendor: Aqua Elegance Warranty: 1 year Perfect for: Central heating radiator installations requiring stylish patterned brushed bronze valves with standard 15mm connections.
£35.00 - £39.00
-
Patterned Matt Black Radiator Valves
Patterned Matt Black Radiator Valves - Pair These patterned matt black radiator valves combine contemporary styling with reliable functionality for central heating systems. Supplied as a pair with 15mm connector size, these valves deliver quality performance with a sophisticated matt black finish that complements modern interiors. Key Features Matt black finish - contemporary, sophisticated appearance Patterned design - decorative detailing Packed as a pair - complete valve set 15mm connector size - standard fitting Central heating compatible - suitable for most systems 1 year guarantee - manufacturer warranty Technical Specification Finish: Matt black Design: Patterned Connector size: 15mm Pack quantity: Pair (2 valves) Compatibility: Central heating systems SKU: BGBP108852 Vendor: Aqua Elegance Warranty: 1 year Perfect for: Central heating radiator installations requiring stylish patterned matt black valves with standard 15mm connections.
£22.00 - £36.00
-
Crosshead Chrome Radiator Valves | Straight & Angled | 15mm | Pair
Classic styling, reliable control. These Crosshead Chrome Radiator Valves from Aqua Elegance bring a timeless crosshead design to your radiator installation, finished in polished chrome to complement both traditional and contemporary bathroom schemes. Available in straight or angled configurations with 15mm connectors for straightforward integration into standard central heating systems. Supplied as a pair. Key Features Classic crosshead design — suits traditional and contemporary interiors Polished chrome finish — clean, durable appearance Available in straight or angled — to suit your pipework configuration 15mm connectors — compatible with standard central heating systems Supplied as a pair — both valves included Reliable temperature control — consistent heat regulation 1-year manufacturer guarantee Technical Specification Brand: Aqua Elegance (BG Bathrooms) Design: Crosshead Finish: Chrome Connector size: 15mm Configuration: Straight or Angled (select from dropdown) Supplied: As a pair Compatibility: Standard central heating systems Guarantee: 1 year SKU (Angled): BGBP103025 — Barcode: 5054913450341 SKU (Straight): BGBP103024 — Barcode: 5054913450334 Complete Your Radiator Installation 180x18mm Radiator Pipe Sleeves — clip-on pipe sleeves in Chrome, Matt Black, Brushed Brass & Brushed Bronze to conceal pipework and finish the installation Chrome Radiator Valve Pipe Sleeve Kit — Pair with Floor Plates — a complete paired kit with floor plates for a fully finished valve installation Also Consider Patterned Chrome Radiator Valves — patterned design alternative in chrome Patterned Matt Black Radiator Valves — patterned design in matt black Patterned Brushed Brass Radiator Valves — patterned design in brushed brass Patterned Brushed Bronze Radiator Valves — patterned design in brushed bronze Frequently Asked Questions Are these supplied as a pair? Yes — both valves are included in the price. You will receive two crosshead chrome radiator valves per order. What is the difference between straight and angled valves? Straight valves are used when the pipework comes out of the wall horizontally at the same level as the radiator inlet. Angled valves are used when the pipework comes up from the floor — the most common configuration in UK homes. If you're unsure, check the direction your pipes run before ordering. What pipe size do these valves fit? These valves have 15mm connectors, compatible with standard 15mm copper pipe used in UK central heating systems. Can I use these with pipe sleeves? Yes — pair these valves with our 180x18mm Radiator Pipe Sleeves in Chrome to conceal the pipework and achieve a fully finished look. What guarantee do these valves carry? Aqua Elegance provides a 1-year manufacturer guarantee on these radiator valves.
£49.00 £40.00
-
Tavistock TR9008 Comfort Height Concealed Cistern - 6/3L Dual Flush with Pneumatic Button
Tavistock / Roper Rhodes TR9008 Comfort Height Concealed Cistern Premium concealed cistern designed for comfort height installations - the Tavistock TR9008 combines efficient dual flush technology with easy installation and superior build quality. Key Features 6/3 Litre Dual Flush - Water-efficient flushing with two volume options Comfort Height Compatible - Works with all Tavistock / Roper Rhodes comfort height back to wall pans Pre-Assembled - Arrives ready to install, saving time and labour Insulated Design - Includes polystyrene insulation jacket to prevent condensation Chrome Pneumatic Button - Premium chrome effect flush button included Furniture Compatible - Designed for 820mm high furniture units Flexible Flush Options - Compatible with optional square flush button or contactless sensor Technical Specifications Flush Volume: 6/3 litres dual flush Height: Suitable for 820mm furniture units Installation: Concealed, back to wall Included: Polystyrene insulation jacket, chrome pneumatic button Model: TR9008 Brand: Tavistock / Roper Rhodes What's Included Concealed cistern (pre-assembled) Polystyrene insulation jacket Chrome effect pneumatic flush button Please Note: Not suitable for use with flush plates in furniture installations. Why Choose This Cistern? The Tavistock TR9008 offers professional-grade performance with straightforward installation. The pre-assembled design means less time on-site, while the insulation jacket prevents condensation issues. Perfect for modern bathroom installations where comfort height is required and a clean, concealed aesthetic is desired.
£146.00 £68.00
You have seen 157 out of 157 products
