McAlpine 90° Chrome Plated Brass Compression Bend | 32mm, 1¼" & 1½" | 32A-CB / 35A-CB / 42A-CB

Description

The McAlpine 90° Chrome Plated Brass Compression Bend provides a right-angle directional change in a chrome waste pipe run, with sleek chrome plated compression nuts that match McAlpine’s CP Brass trap range for a consistent, premium finish. Available in three sizes — 32mm Euro (32A-CB), 1¼" (35A-CB) and 1½" (42A-CB) — covering the full range of standard UK and European waste pipe diameters. Ideal for under-sink, vanity unit, and basin waste installations.

Key Features

  • 90° bend angle: Right-angle directional change for waste pipe runs
  • Chrome plated brass compression: Premium finish matching McAlpine CP Brass trap compression nuts
  • Three sizes available: 32mm Euro, 1¼" (35mm) and 1½" (42mm) — select above
  • Covers UK and European pipe sizes: 32mm Euro and 35mm UK 1¼" are both available
  • Part of the McAlpine CP Chrome Plated Brass Waste range
  • Compression connection: No solvent cement required

Technical Specification

  • Brand: McAlpine
  • SKUs: 32A-CB (32mm Euro) | 35A-CB (1¼" / 35mm) | 42A-CB (1½" / 42mm)
  • Bend angle: 90°
  • Material: Chrome plated brass
  • Connection type: Compression
  • Available sizes: 32mm Euro | 1¼" (35mm) | 1½" (42mm)
  • For use with: McAlpine CP Chrome Plated Brass Waste Pipe and Fittings
  • Country of Origin: United Kingdom

Frequently Asked Questions

  • Which size do I need?
    32mm Euro is the metric European standard for basin waste pipe. 1¼" (35mm) is the traditional UK imperial size for basin and bidet wastes. 1½" (42mm) is used for bath and shower waste. Match to your existing trap outlet or waste pipe diameter.
  • What is the difference between 32mm Euro and 1¼"?
    These are close but not the same — 32mm is the European metric standard, 1¼" (approx. 35mm) is the UK imperial equivalent. Check your existing pipework carefully before ordering. If in doubt, rubber seal reducers can help adapt between sizes in some fittings.
  • Need a gentler angle?
    If a 90° turn is too sharp for your installation, consider the McAlpine 135° Chrome Brass Compression Bend for a shallower directional change.
  • Can I order if the item shows as out of stock?
    Yes — this item is ordered in specially for you and will typically be dispatched within 5–7 working days.

Delivery Information

This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.

Complete Your Waste Pipe Installation

Frequently bought alongside the McAlpine 90° Chrome Brass Compression Bend:

Also explore our full range of small plumbing fittings and accessories.

McAlpine 90° Chrome Plated Brass Compression Bend | 32mm, 1¼" & 1½" | 32A-CB / 35A-CB / 42A-CB

Product form
£4.99 Delivery

The McAlpine 90° Chrome Plated Brass Compression Bend provides a right-angle directional change in a chrome waste pipe run, with... Read more

Download spec sheet (PDF)
Free pickup in our shop(s)

£23.50

Only £4.99 Delivery

    • Guaranteed secure & safe checkout.

      paypal
    • We aim to dispatch stocked items same day 1-2 day delivery
    • Non stocked items are ordered direct 2-7 day delivery
    • Several items? ask for a bespoke price!
    • Wetwall Free Delivery On Orders Over £250
    • FREE Collection from Norwich
    • No hassle returns, 30 days return

    Description

    The McAlpine 90° Chrome Plated Brass Compression Bend provides a right-angle directional change in a chrome waste pipe run, with sleek chrome plated compression nuts that match McAlpine’s CP Brass trap range for a consistent, premium finish. Available in three sizes — 32mm Euro (32A-CB), 1¼" (35A-CB) and 1½" (42A-CB) — covering the full range of standard UK and European waste pipe diameters. Ideal for under-sink, vanity unit, and basin waste installations.

    Key Features

    • 90° bend angle: Right-angle directional change for waste pipe runs
    • Chrome plated brass compression: Premium finish matching McAlpine CP Brass trap compression nuts
    • Three sizes available: 32mm Euro, 1¼" (35mm) and 1½" (42mm) — select above
    • Covers UK and European pipe sizes: 32mm Euro and 35mm UK 1¼" are both available
    • Part of the McAlpine CP Chrome Plated Brass Waste range
    • Compression connection: No solvent cement required

    Technical Specification

    • Brand: McAlpine
    • SKUs: 32A-CB (32mm Euro) | 35A-CB (1¼" / 35mm) | 42A-CB (1½" / 42mm)
    • Bend angle: 90°
    • Material: Chrome plated brass
    • Connection type: Compression
    • Available sizes: 32mm Euro | 1¼" (35mm) | 1½" (42mm)
    • For use with: McAlpine CP Chrome Plated Brass Waste Pipe and Fittings
    • Country of Origin: United Kingdom

    Frequently Asked Questions

    • Which size do I need?
      32mm Euro is the metric European standard for basin waste pipe. 1¼" (35mm) is the traditional UK imperial size for basin and bidet wastes. 1½" (42mm) is used for bath and shower waste. Match to your existing trap outlet or waste pipe diameter.
    • What is the difference between 32mm Euro and 1¼"?
      These are close but not the same — 32mm is the European metric standard, 1¼" (approx. 35mm) is the UK imperial equivalent. Check your existing pipework carefully before ordering. If in doubt, rubber seal reducers can help adapt between sizes in some fittings.
    • Need a gentler angle?
      If a 90° turn is too sharp for your installation, consider the McAlpine 135° Chrome Brass Compression Bend for a shallower directional change.
    • Can I order if the item shows as out of stock?
      Yes — this item is ordered in specially for you and will typically be dispatched within 5–7 working days.

    Delivery Information

    This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.

    Complete Your Waste Pipe Installation

    Frequently bought alongside the McAlpine 90° Chrome Brass Compression Bend:

    Also explore our full range of small plumbing fittings and accessories.

    Top 10 best selling products

    You may also like these products. These products are rated as 'top 10 best of the best' by our clients

    Shop now

    Returns & Delivery

    When will my order be delivered?

    Your order will be packaged really carefully and delivered wherever you want. Delivery takes between 2-4 business days. Look out for emails from our delivery partners, You will receive an e-mail after ordering with more information about the delivery.

    Can I return my product?

    Orders can be returned or exchanged within 30 days of receiving the parcel, providing they are in original resalable condition.

    What can I do if my item (or part of it) is damaged?

    We work hard to deliver your items without damage. If anything arrives damaged on delivery just refuse the delivery, Any damages found after delivery must be reported with photographic evidence. Orders can be returned or exchanged within 30 days of receiving the delivery, providing they are in original resalable condition.

    Recently viewed products

      © 2026 Bubblegum Bathrooms, Powered by Shopify

        • American Express
        • Apple Pay
        • Diners Club
        • Discover
        • Google Pay
        • Klarna
        • Maestro
        • Mastercard
        • PayPal
        • Shop Pay
        • Union Pay
        • Visa

        Login

        Forgot your password?

        Don't have an account yet?
        Create account

        Sign up for our newsletter

        Sign up for our newsletter

        Subscribe to our emails