Geberit Type 3 Ceramic Honeycomb Filter (242.999.00.1) - Official Replacement Filter for AquaClean Shower Toilets
This genuine Geberit Type 3 ceramic honeycomb filter provides excellent odour neutralisation for Geberit AquaClean shower toilets. The advanced ceramic honeycomb structure effectively filters and neutralises bathroom odours, maintaining a fresh environment whilst protecting your shower toilet's internal mechanisms.
Compatible Models:
Geberit AquaClean Mera
Geberit AquaClean Tuma Comfort
Geberit AquaClean Monolith Plus (floor standing)
Key Benefits:
Excellent odour neutralisation performance
Genuine Geberit replacement part
Ceramic honeycomb construction for superior filtration
Maintains fresh bathroom environment
Easy to replace - no tools required
Long-lasting filter life
Protects shower toilet mechanisms
Covered by 1-year Geberit manufacturer's guarantee
What is a Ceramic Honeycomb Filter?
The ceramic honeycomb filter uses an advanced porous ceramic structure with thousands of tiny channels (like a honeycomb). This design maximises surface area for odour absorption whilst allowing air to flow freely through the filter. The ceramic material is highly effective at trapping and neutralising odour molecules.
How to Replace the Filter:
Locate the filter compartment on your AquaClean shower toilet (typically at the rear or side)
Open the filter cover by pressing the release button or sliding the cover
Remove the old Type 3 ceramic honeycomb filter
Insert the new Geberit Type 3 filter into the compartment
Close the filter cover until it clicks into place
Reset the filter replacement indicator if your model has one
When to Replace the Filter:
Replace your Type 3 ceramic honeycomb filter when:
The filter replacement indicator appears on your shower toilet display
You notice reduced odour neutralisation performance
Approximately every 12 months (depending on usage)
The filter appears discoloured or saturated
Why Choose Genuine Geberit Filters?
Specifically designed for AquaClean shower toilets
Guaranteed compatibility and performance
Correct size and filtration capacity
Protects your manufacturer's warranty
Quality tested and approved by Geberit
Superior odour neutralisation compared to generic filters
Product Specifications:
Type: Type 3 Ceramic Honeycomb Filter
Material: Porous ceramic honeycomb structure
Function: Odour neutralisation and air filtration
Compatibility: AquaClean Mera, Tuma Comfort, Monolith Plus
Replacement Frequency: Approximately 12 months
Manufacturer: Geberit
Part Number: 242.999.00.1
Guarantee: 1 year manufacturer's warranty
Condition: Genuine brand new Geberit product
SKU: 242.999.00.1
Frequently Asked Questions:
Q: How often should I replace the Type 3 filter?A: Replace approximately every 12 months, or when the filter replacement indicator appears on your shower toilet display.
Q: Will this filter fit my AquaClean model?A: This Type 3 filter is compatible with AquaClean Mera, Tuma Comfort, and Monolith Plus models. Check your user manual to confirm your model requires Type 3 filters.
Q: Can I use a generic filter instead?A: We recommend using genuine Geberit filters to ensure optimal performance, maintain your warranty, and guarantee correct fit and filtration capacity.
Q: Is the filter difficult to replace?A: No, filter replacement is simple and requires no tools. Simply open the filter compartment, remove the old filter, insert the new one, and close the cover.
Maintenance Tips:
Keep a spare filter on hand for immediate replacement when needed
Note the replacement date to track filter lifespan
Don't attempt to clean or reuse ceramic honeycomb filters
Always use genuine Geberit Type 3 filters for your AquaClean model
Replace promptly when indicator appears to maintain odour control
Regular descaling is also essential - use Geberit AquaClean descaling agent to maintain your shower toilet
Essential maintenance part for Geberit AquaClean Mera, Tuma Comfort and Monolith Plus shower toilet owners. Regular filter replacement ensures optimal odour neutralisation and maintains the fresh, hygienic environment your AquaClean shower toilet is designed to provide.
Don't forget: Your AquaClean shower toilet also requires regular descaling. Shop our Geberit AquaClean descaling agent to keep your shower toilet performing at its best.
MK Grid Plus K5851WHI 1-Module Digital TV Socket - White
This MK Grid Plus 1-module digital TV socket provides reliable connectivity for digital television signals within modular grid plate systems. The compact white module clips easily into MK Grid Plus mounting frames, offering flexible TV connection points for modern digital TV installations.
Key Features:
1-module digital TV socket for MK Grid Plus system
Designed for digital TV signal distribution
White finish to match Grid Plus range
Front-loading design - clips into place from front of mounting frame
Compact 1-module width (half-width)
Compatible with all MK Grid Plus frames and plates
Modular system allows custom configurations
Part of the comprehensive MK Grid Plus range
Backed by MK quality and reliability
What is MK Grid Plus?
MK Grid Plus is a modular wiring accessory system that allows you to create custom switch and socket configurations to suit your exact requirements. Individual modules (switches, sockets, TV outlets, data outlets) clip into mounting frames, which are then fitted into standard grid plates. This flexibility makes Grid Plus ideal for creating bespoke AV and connectivity panels.
Applications:
Living room TV connection points
Bedroom digital TV outlets
Multi-room TV distribution systems
Home entertainment installations
New build and renovation projects
Commercial properties requiring TV connectivity
Installation:
The module clips easily into place from the front of any MK Grid Plus mounting frame - no tools required for module installation. The front-loading design means you can add, remove or reconfigure modules without dismantling the entire installation. Professional installation by a qualified electrician or AV installer is recommended.
Grid Plus System Compatibility:
This 1-module TV socket is compatible with all MK Grid Plus mounting frames and plates. Being a 1-module (half-width) unit, you can combine it with other modules:
2-module frames (1-gang plates) - fits 2 × 1-module units
4-module frames (2-gang plates) - fits 4 × 1-module units
6-module frames (3-gang plates) - fits 6 × 1-module units
Mix with other Grid Plus modules (switches, sockets, data outlets)
Available in multiple finishes to match your interior
Technical Specifications:
Model: K5851WHI
Type: Digital TV socket module
Connection: TV (digital television)
Colour: White
Module Width: 1 module (half-width)
Installation: Front-loading clip-in
System: MK Grid Plus modular
SKU: K5851WHI
Note: Mounting frame and grid plate sold separately
Perfect for electricians, AV installers and homeowners creating custom electrical and entertainment installations with the MK Grid Plus modular system. The white finish coordinates with the full Grid Plus range for a professional, cohesive appearance. Ideal for combining TV connectivity with power sockets and other modules in a single plate.
MK Grid Plus K4896FN WHI 20A Double Pole Fan Switch Module - White
This MK Grid Plus 20A double pole fan switch module features clear 'FAN' marking, providing dedicated control for extractor fan circuits. The white rocker switch offers positive on/off control with double pole switching for complete isolation, essential for safe fan operation and maintenance.
Key Features:
20A double pole switch module specifically marked 'FAN'
Double pole switching isolates both live and neutral
White rocker switch with clear on/off marking
Front-loading design - clips into place from front of mounting frame
Essential for extractor fan safety and isolation
Clear 'FAN' marking for easy identification
Modular system allows custom configurations
Compatible with all MK Grid Plus frames and plates
Part of the comprehensive MK Grid Plus range
Backed by MK quality and reliability
Why a Dedicated Fan Switch?
A clearly marked fan switch is essential for bathroom and kitchen extractor fan installations, providing a dedicated isolation point that's easily identifiable. The 'FAN' marking ensures everyone in the household knows this switch controls the extractor fan, allowing for safe isolation during cleaning, maintenance or when the fan needs to be disconnected.
Applications:
Bathroom extractor fan control
Kitchen extractor fan installations
Utility room ventilation fan circuits
Inline extractor fan control
Commercial ventilation fan installations
Any location requiring dedicated fan isolation
Double Pole Switching:
The double pole switch breaks both the live and neutral connections simultaneously, providing complete electrical isolation. This is essential for fan installations, ensuring safe disconnection for cleaning, maintenance or when the fan needs servicing. Double pole switching is safer than single pole and often required for bathroom installations.
MK Grid Plus System:
MK Grid Plus is a modular wiring accessory system that allows you to create custom switch and socket configurations. Individual modules clip into mounting frames, which are then fitted into standard grid plates. This flexibility makes Grid Plus ideal for creating bespoke control panels in bathrooms, kitchens and utility rooms.
Installation:
The module clips easily into place from the front of any MK Grid Plus mounting frame - no tools required for module installation. The front-loading design means you can add, remove or reconfigure modules without dismantling the entire installation. Professional installation by a qualified electrician is required for all electrical work.
Grid Plus System Compatibility:
This fan switch module is compatible with all MK Grid Plus mounting frames and plates:
2-module frames (1-gang plates)
4-module frames (2-gang plates)
6-module frames (3-gang plates)
Available in multiple finishes to match your interior
Technical Specifications:
Model: K4896FN WHI
Type: 20A double pole fan switch module
Switching: Double pole (isolates live and neutral)
Current Rating: 20A
Marking: 'FAN' clearly printed
Colour: White
Switch Type: Rocker with on/off marking
Module Width: 2 modules (full-width)
Installation: Front-loading clip-in
System: MK Grid Plus modular
SKU: K4896FN WHI
Note: Mounting frame and grid plate sold separately
Perfect for electricians, contractors and homeowners creating custom electrical installations with the MK Grid Plus modular system. The white finish coordinates with the full Grid Plus range for a professional appearance. Essential for extractor fan installations, providing safe, clearly marked isolation for ventilation systems.
MK Grid Plus K4896BR WHI 20A Double Pole Boiler Switch Module - White
This MK Grid Plus 20A double pole boiler switch module features clear 'BOILER' marking, providing dedicated control for boiler circuits. The white rocker switch offers positive on/off control with double pole switching for complete isolation, essential for safe boiler operation and maintenance.
Key Features:
20A double pole switch module specifically marked 'BOILER'
Double pole switching isolates both live and neutral
White rocker switch with clear on/off marking
Front-loading design - clips into place from front of mounting frame
Essential for boiler safety and isolation
Clear 'BOILER' marking for easy identification
Modular system allows custom configurations
Compatible with all MK Grid Plus frames and plates
Part of the comprehensive MK Grid Plus range
Backed by MK quality and reliability
Why a Dedicated Boiler Switch?
A clearly marked boiler switch is essential for central heating installations, providing a dedicated isolation point that's easily identifiable for servicing and emergencies. The 'BOILER' marking ensures everyone in the household knows this switch controls the boiler, allowing for safe isolation during maintenance, servicing or when the boiler needs to be disconnected.
Applications:
Central heating boiler control
Combi boiler installations
System boiler circuits
Airing cupboard boiler control
Commercial boiler installations
Any location requiring dedicated boiler isolation
Double Pole Switching:
The double pole switch breaks both the live and neutral connections simultaneously, providing complete electrical isolation. This is essential for boiler installations, ensuring safe disconnection for servicing, maintenance or emergency situations. Double pole switching is safer than single pole and often required by regulations for heating appliances.
MK Grid Plus System:
MK Grid Plus is a modular wiring accessory system that allows you to create custom switch and socket configurations. Individual modules clip into mounting frames, which are then fitted into standard grid plates. This flexibility makes Grid Plus ideal for creating bespoke control panels in airing cupboards, utility rooms and plant rooms.
Installation:
The module clips easily into place from the front of any MK Grid Plus mounting frame - no tools required for module installation. The front-loading design means you can add, remove or reconfigure modules without dismantling the entire installation. Professional installation by a qualified electrician is required for all electrical work.
Grid Plus System Compatibility:
This boiler switch module is compatible with all MK Grid Plus mounting frames and plates:
2-module frames (1-gang plates)
4-module frames (2-gang plates)
6-module frames (3-gang plates)
Available in multiple finishes to match your interior
Technical Specifications:
Model: K4896BR WHI
Type: 20A double pole boiler switch module
Switching: Double pole (isolates live and neutral)
Current Rating: 20A
Marking: 'BOILER' clearly printed
Colour: White
Switch Type: Rocker with on/off marking
Module Width: 2 modules (full-width)
Installation: Front-loading clip-in
System: MK Grid Plus modular
SKU: K4896BR WHI
Note: Mounting frame and grid plate sold separately
Perfect for electricians, heating engineers and homeowners creating custom electrical installations with the MK Grid Plus modular system. The white finish coordinates with the full Grid Plus range for a professional appearance. Essential for boiler installations, providing safe, clearly marked isolation for central heating systems.
MK Grid Plus K4896CH WHI 20A Double Pole Cooker Hood Switch Module - White
This MK Grid Plus 20A double pole cooker hood switch module features clear 'COOKER HOOD' marking, providing dedicated control for cooker hood/extractor fan circuits. The white rocker switch offers positive on/off control with double pole switching for complete isolation, essential for safe cooker hood operation and maintenance.
Key Features:
20A double pole switch module specifically marked 'COOKER HOOD'
Double pole switching isolates both live and neutral
White rocker switch with clear on/off marking
Front-loading design - clips into place from front of mounting frame
Essential for cooker hood safety and isolation
Clear 'COOKER HOOD' marking for easy identification
Modular system allows custom configurations
Compatible with all MK Grid Plus frames and plates
Part of the comprehensive MK Grid Plus range
Backed by MK quality and reliability
Why a Dedicated Cooker Hood Switch?
A clearly marked cooker hood switch is essential for kitchen installations, providing a dedicated isolation point that's easily identifiable. The 'COOKER HOOD' marking ensures everyone in the household knows this switch controls the extractor fan, allowing for safe isolation during filter cleaning, maintenance or when the hood needs to be disconnected.
Applications:
Cooker hood/extractor fan control in kitchens
Integrated cooker hood installations
Commercial kitchen extractor control
Canopy hood circuits
Any location requiring dedicated cooker hood isolation
Double Pole Switching:
The double pole switch breaks both the live and neutral connections simultaneously, providing complete electrical isolation. This is essential for cooker hood installations, ensuring safe disconnection for filter cleaning, maintenance or when the hood needs servicing. Double pole switching is safer than single pole and often required for kitchen appliances.
MK Grid Plus System:
MK Grid Plus is a modular wiring accessory system that allows you to create custom switch and socket configurations. Individual modules clip into mounting frames, which are then fitted into standard grid plates. This flexibility makes Grid Plus ideal for creating bespoke control panels in kitchens, combining cooker hood switches with hob controls, socket outlets and other appliance switches.
Installation:
The module clips easily into place from the front of any MK Grid Plus mounting frame - no tools required for module installation. The front-loading design means you can add, remove or reconfigure modules without dismantling the entire installation. Professional installation by a qualified electrician is required for all electrical work.
Grid Plus System Compatibility:
This cooker hood switch module is compatible with all MK Grid Plus mounting frames and plates:
2-module frames (1-gang plates)
4-module frames (2-gang plates)
6-module frames (3-gang plates)
Available in multiple finishes to match your interior
Technical Specifications:
Model: K4896CH WHI
Type: 20A double pole cooker hood switch module
Switching: Double pole (isolates live and neutral)
Current Rating: 20A
Marking: 'COOKER HOOD' clearly printed
Colour: White
Switch Type: Rocker with on/off marking
Module Width: 2 modules (full-width)
Installation: Front-loading clip-in
System: MK Grid Plus modular
SKU: K4896CH WHI
Note: Mounting frame and grid plate sold separately
Perfect for electricians, contractors and homeowners creating custom electrical installations with the MK Grid Plus modular system. The white finish coordinates with the full Grid Plus range for a professional appearance. Essential for cooker hood installations, providing safe, clearly marked isolation for kitchen extractor fans.
MK Grid Plus K4896TD WHI 20A Double Pole Tumble Dryer Switch Module - White
This MK Grid Plus 20A double pole tumble dryer switch module features clear 'TUMBLE DRYER' marking, providing dedicated control for tumble dryer circuits. The white rocker switch offers positive on/off control with double pole switching for complete isolation, preventing accidental tumble dryer disconnection.
Key Features:
20A double pole switch module specifically marked 'TUMBLE DRYER'
Double pole switching isolates both live and neutral
White rocker switch with clear on/off marking
Front-loading design - clips into place from front of mounting frame
Prevents accidental tumble dryer disconnection
Clear 'TUMBLE DRYER' marking for easy identification
Modular system allows custom configurations
Compatible with all MK Grid Plus frames and plates
Part of the comprehensive MK Grid Plus range
Backed by MK quality and reliability
Why a Dedicated Tumble Dryer Switch?
A clearly marked tumble dryer switch prevents accidental disconnection of your tumble dryer - particularly important in utility rooms where multiple appliances may share socket outlets. The 'TUMBLE DRYER' marking ensures everyone in the household knows this switch controls the tumble dryer, preventing interruption to drying cycles and potential damage from incomplete programmes.
Applications:
Dedicated tumble dryer control in utility rooms
Kitchen tumble dryer installations
Garage and outbuilding tumble dryer circuits
Commercial laundry tumble dryer control
Any location where tumble dryer needs dedicated, clearly marked control
Double Pole Switching:
The double pole switch breaks both the live and neutral connections simultaneously, providing complete electrical isolation. This is safer than single pole switching and allows for proper isolation during maintenance, servicing or when the tumble dryer needs to be disconnected.
MK Grid Plus System:
MK Grid Plus is a modular wiring accessory system that allows you to create custom switch and socket configurations. Individual modules clip into mounting frames, which are then fitted into standard grid plates. This flexibility makes Grid Plus ideal for creating bespoke control panels in utility rooms, combining tumble dryer switches with washing machine controls and socket outlets.
Installation:
The module clips easily into place from the front of any MK Grid Plus mounting frame - no tools required for module installation. The front-loading design means you can add, remove or reconfigure modules without dismantling the entire installation. Professional installation by a qualified electrician is required for all electrical work.
Grid Plus System Compatibility:
This tumble dryer switch module is compatible with all MK Grid Plus mounting frames and plates:
2-module frames (1-gang plates)
4-module frames (2-gang plates)
6-module frames (3-gang plates)
Available in multiple finishes to match your interior
Technical Specifications:
Model: K4896TD WHI
Type: 20A double pole tumble dryer switch module
Switching: Double pole (isolates live and neutral)
Current Rating: 20A
Marking: 'TUMBLE DRYER' clearly printed
Colour: White
Switch Type: Rocker with on/off marking
Module Width: 2 modules (full-width)
Installation: Front-loading clip-in
System: MK Grid Plus modular
SKU: K4896TD WHI
Note: Mounting frame and grid plate sold separately
Perfect for electricians, contractors and homeowners creating custom electrical installations with the MK Grid Plus modular system. The white finish coordinates with the full Grid Plus range for a professional appearance. Essential for preventing accidental tumble dryer disconnection and ensuring safe isolation for maintenance.
MK Grid Plus K4896HB WHI 20A Double Pole Hob Switch Module - White
This MK Grid Plus 20A double pole hob switch module features clear 'HOB' marking, providing dedicated control for electric hob circuits. The white rocker switch offers positive on/off control with double pole switching for complete isolation, essential for safe hob operation and maintenance.
Key Features:
20A double pole switch module specifically marked 'HOB'
Double pole switching isolates both live and neutral
White rocker switch with clear on/off marking
Front-loading design - clips into place from front of mounting frame
Essential for electric hob safety and isolation
Clear 'HOB' marking for easy identification
Modular system allows custom configurations
Compatible with all MK Grid Plus frames and plates
Part of the comprehensive MK Grid Plus range
Backed by MK quality and reliability
Why a Dedicated Hob Switch?
A clearly marked hob switch is essential for electric hob installations, providing a dedicated isolation point that's easily identifiable in emergencies. The 'HOB' marking ensures everyone in the household knows this switch controls the hob, allowing for quick disconnection if needed and safe isolation during cleaning or maintenance.
Applications:
Electric hob control in kitchens
Induction hob installations
Ceramic hob circuits
Commercial kitchen hob control
Any location requiring dedicated hob isolation
Double Pole Switching:
The double pole switch breaks both the live and neutral connections simultaneously, providing complete electrical isolation. This is essential for hob installations, ensuring safe disconnection for cleaning, maintenance or emergency situations. Double pole switching is safer than single pole and often required by regulations for cooking appliances.
MK Grid Plus System:
MK Grid Plus is a modular wiring accessory system that allows you to create custom switch and socket configurations. Individual modules clip into mounting frames, which are then fitted into standard grid plates. This flexibility makes Grid Plus ideal for creating bespoke control panels in kitchens, combining hob switches with socket outlets and other appliance controls.
Installation:
The module clips easily into place from the front of any MK Grid Plus mounting frame - no tools required for module installation. The front-loading design means you can add, remove or reconfigure modules without dismantling the entire installation. Professional installation by a qualified electrician is required for all electrical work.
Grid Plus System Compatibility:
This hob switch module is compatible with all MK Grid Plus mounting frames and plates:
2-module frames (1-gang plates)
4-module frames (2-gang plates)
6-module frames (3-gang plates)
Available in multiple finishes to match your interior
Technical Specifications:
Model: K4896HB WHI
Type: 20A double pole hob switch module
Switching: Double pole (isolates live and neutral)
Current Rating: 20A
Marking: 'HOB' clearly printed
Colour: White
Switch Type: Rocker with on/off marking
Module Width: 2 modules (full-width)
Installation: Front-loading clip-in
System: MK Grid Plus modular
SKU: K4896HB WHI
Note: Mounting frame and grid plate sold separately
Perfect for electricians, contractors and homeowners creating custom electrical installations with the MK Grid Plus modular system. The white finish coordinates with the full Grid Plus range for a professional appearance. Essential for electric hob installations, providing safe, clearly marked isolation for cooking appliances.
MK Grid Plus K4896FG WHI 20A Double Pole Fridge Switch Module - White
This MK Grid Plus 20A double pole fridge switch module features clear 'FRIDGE' marking, providing dedicated control for fridge circuits. The white rocker switch offers positive on/off control with double pole switching for complete isolation, preventing accidental fridge disconnection.
Key Features:
20A double pole switch module specifically marked 'FRIDGE'
Double pole switching isolates both live and neutral
White rocker switch with clear on/off marking
Front-loading design - clips into place from front of mounting frame
Prevents accidental fridge disconnection
Clear 'FRIDGE' marking for easy identification
Modular system allows custom configurations
Compatible with all MK Grid Plus frames and plates
Part of the comprehensive MK Grid Plus range
Backed by MK quality and reliability
Why a Dedicated Fridge Switch?
A clearly marked fridge switch prevents accidental disconnection of your fridge - a common problem when fridges share sockets with other kitchen appliances. The 'FRIDGE' marking ensures everyone in the household knows this switch controls the fridge, helping prevent costly food spoilage from accidental power loss.
Applications:
Dedicated fridge control in kitchens
Garage and utility room fridge circuits
Basement and outbuilding fridge installations
Commercial kitchen fridge control
Any location where fridge needs dedicated, clearly marked control
Double Pole Switching:
The double pole switch breaks both the live and neutral connections simultaneously, providing complete electrical isolation. This is safer than single pole switching and allows for proper isolation during maintenance or when the fridge needs to be disconnected.
MK Grid Plus System:
MK Grid Plus is a modular wiring accessory system that allows you to create custom switch and socket configurations. Individual modules clip into mounting frames, which are then fitted into standard grid plates. This flexibility makes Grid Plus ideal for creating bespoke control panels in kitchens, utility rooms and workshops.
Installation:
The module clips easily into place from the front of any MK Grid Plus mounting frame - no tools required for module installation. The front-loading design means you can add, remove or reconfigure modules without dismantling the entire installation. Professional installation by a qualified electrician is required for all electrical work.
Grid Plus System Compatibility:
This fridge switch module is compatible with all MK Grid Plus mounting frames and plates:
2-module frames (1-gang plates)
4-module frames (2-gang plates)
6-module frames (3-gang plates)
Available in multiple finishes to match your interior
Technical Specifications:
Model: K4896FG WHI
Type: 20A double pole fridge switch module
Switching: Double pole (isolates live and neutral)
Current Rating: 20A
Marking: 'FRIDGE' clearly printed
Colour: White
Switch Type: Rocker with on/off marking
Module Width: 2 modules (full-width)
Installation: Front-loading clip-in
System: MK Grid Plus modular
SKU: K4896FG WHI
Note: Mounting frame and grid plate sold separately
Perfect for electricians, contractors and homeowners creating custom electrical installations with the MK Grid Plus modular system. The white finish coordinates with the full Grid Plus range for a professional appearance. Essential for preventing accidental fridge disconnection - protecting your fresh food investment.
MK Grid Plus K4896DW WHI 20A Double Pole Dishwasher Switch Module - White
This MK Grid Plus 20A double pole dishwasher switch module features clear 'DISHWASHER' marking, providing dedicated control for dishwasher circuits. The white rocker switch offers positive on/off control with double pole switching for complete isolation, preventing accidental dishwasher disconnection.
Key Features:
20A double pole switch module specifically marked 'DISHWASHER'
Double pole switching isolates both live and neutral
White rocker switch with clear on/off marking
Front-loading design - clips into place from front of mounting frame
Prevents accidental dishwasher disconnection
Clear 'DISHWASHER' marking for easy identification
Modular system allows custom configurations
Compatible with all MK Grid Plus frames and plates
Part of the comprehensive MK Grid Plus range
Backed by MK quality and reliability
Why a Dedicated Dishwasher Switch?
A clearly marked dishwasher switch prevents accidental disconnection of your dishwasher - particularly important in kitchens where multiple appliances may share socket outlets. The 'DISHWASHER' marking ensures everyone in the household knows this switch controls the dishwasher, preventing interruption to wash cycles and potential damage from incomplete programmes.
Applications:
Dedicated dishwasher control in kitchens
Integrated dishwasher installations
Utility room dishwasher circuits
Commercial kitchen dishwasher control
Any location where dishwasher needs dedicated, clearly marked control
Double Pole Switching:
The double pole switch breaks both the live and neutral connections simultaneously, providing complete electrical isolation. This is safer than single pole switching and allows for proper isolation during maintenance, servicing or when the dishwasher needs to be disconnected.
MK Grid Plus System:
MK Grid Plus is a modular wiring accessory system that allows you to create custom switch and socket configurations. Individual modules clip into mounting frames, which are then fitted into standard grid plates. This flexibility makes Grid Plus ideal for creating bespoke control panels in kitchens, utility rooms and workshops.
Installation:
The module clips easily into place from the front of any MK Grid Plus mounting frame - no tools required for module installation. The front-loading design means you can add, remove or reconfigure modules without dismantling the entire installation. Professional installation by a qualified electrician is required for all electrical work.
Grid Plus System Compatibility:
This dishwasher switch module is compatible with all MK Grid Plus mounting frames and plates:
2-module frames (1-gang plates)
4-module frames (2-gang plates)
6-module frames (3-gang plates)
Available in multiple finishes to match your interior
Technical Specifications:
Model: K4896DW WHI
Type: 20A double pole dishwasher switch module
Switching: Double pole (isolates live and neutral)
Current Rating: 20A
Marking: 'DISHWASHER' clearly printed
Colour: White
Switch Type: Rocker with on/off marking
Module Width: 2 modules (full-width)
Installation: Front-loading clip-in
System: MK Grid Plus modular
SKU: K4896DW WHI
Note: Mounting frame and grid plate sold separately
Perfect for electricians, contractors and homeowners creating custom electrical installations with the MK Grid Plus modular system. The white finish coordinates with the full Grid Plus range for a professional appearance. Essential for preventing accidental dishwasher disconnection and ensuring safe isolation for maintenance.
MK Grid Plus K4896FF WHI 20A Double Pole Fridge Freezer Switch Module - White
This MK Grid Plus 20A double pole fridge freezer switch module features clear 'FRIDGE FREEZER' marking, providing dedicated control for fridge freezer circuits. The white rocker switch offers positive on/off control with double pole switching for complete isolation, preventing accidental fridge freezer disconnection.
Key Features:
20A double pole switch module specifically marked 'FRIDGE FREEZER'
Double pole switching isolates both live and neutral
White rocker switch with clear on/off marking
Front-loading design - clips into place from front of mounting frame
Prevents accidental fridge freezer disconnection
Clear 'FRIDGE FREEZER' marking for easy identification
Modular system allows custom configurations
Compatible with all MK Grid Plus frames and plates
Part of the comprehensive MK Grid Plus range
Backed by MK quality and reliability
Why a Dedicated Fridge Freezer Switch?
A clearly marked fridge freezer switch prevents accidental disconnection of your appliance - a common problem when fridge freezers share sockets with other kitchen equipment. The 'FRIDGE FREEZER' marking ensures everyone in the household knows this switch controls the fridge freezer, helping prevent costly food spoilage from accidental power loss.
Applications:
Dedicated fridge freezer control in kitchens
Garage and utility room fridge freezer circuits
Basement and outbuilding installations
Commercial kitchen fridge freezer control
Any location where fridge freezer needs dedicated, clearly marked control
Double Pole Switching:
The double pole switch breaks both the live and neutral connections simultaneously, providing complete electrical isolation. This is safer than single pole switching and allows for proper isolation during maintenance or when the fridge freezer needs to be disconnected.
MK Grid Plus System:
MK Grid Plus is a modular wiring accessory system that allows you to create custom switch and socket configurations. Individual modules clip into mounting frames, which are then fitted into standard grid plates. This flexibility makes Grid Plus ideal for creating bespoke control panels in kitchens, utility rooms and workshops.
Installation:
The module clips easily into place from the front of any MK Grid Plus mounting frame - no tools required for module installation. The front-loading design means you can add, remove or reconfigure modules without dismantling the entire installation. Professional installation by a qualified electrician is required for all electrical work.
Grid Plus System Compatibility:
This fridge freezer switch module is compatible with all MK Grid Plus mounting frames and plates:
2-module frames (1-gang plates)
4-module frames (2-gang plates)
6-module frames (3-gang plates)
Available in multiple finishes to match your interior
Technical Specifications:
Model: K4896FF WHI
Type: 20A double pole fridge freezer switch module
Switching: Double pole (isolates live and neutral)
Current Rating: 20A
Marking: 'FRIDGE FREEZER' clearly printed
Colour: White
Switch Type: Rocker with on/off marking
Module Width: 2 modules (full-width)
Installation: Front-loading clip-in
System: MK Grid Plus modular
SKU: K4896FF WHI
Note: Mounting frame and grid plate sold separately
Perfect for electricians, contractors and homeowners creating custom electrical installations with the MK Grid Plus modular system. The white finish coordinates with the full Grid Plus range for a professional appearance. Essential for preventing accidental fridge freezer disconnection - protecting your fresh and frozen food investment.
MK Grid Plus K4896FZ WHI 20A Double Pole Freezer Switch Module - White
This MK Grid Plus 20A double pole freezer switch module features clear 'FREEZER' marking, providing dedicated control for freezer circuits. The white rocker switch offers positive on/off control with double pole switching for complete isolation, preventing accidental freezer disconnection.
Key Features:
20A double pole switch module specifically marked 'FREEZER'
Double pole switching isolates both live and neutral
White rocker switch with clear on/off marking
Front-loading design - clips into place from front of mounting frame
Prevents accidental freezer disconnection
Clear 'FREEZER' marking for easy identification
Modular system allows custom configurations
Compatible with all MK Grid Plus frames and plates
Part of the comprehensive MK Grid Plus range
Backed by MK quality and reliability
Why a Dedicated Freezer Switch?
A clearly marked freezer switch prevents accidental disconnection of your freezer - a common problem when freezers share sockets with other appliances. The 'FREEZER' marking ensures everyone in the household knows this switch controls the freezer, helping prevent costly food spoilage from accidental power loss.
Applications:
Dedicated freezer control in kitchens
Garage and utility room freezer circuits
Basement and outbuilding freezer installations
Commercial kitchen freezer control
Any location where freezer needs dedicated, clearly marked control
Double Pole Switching:
The double pole switch breaks both the live and neutral connections simultaneously, providing complete electrical isolation. This is safer than single pole switching and allows for proper isolation during maintenance or when the freezer needs to be disconnected.
MK Grid Plus System:
MK Grid Plus is a modular wiring accessory system that allows you to create custom switch and socket configurations. Individual modules clip into mounting frames, which are then fitted into standard grid plates. This flexibility makes Grid Plus ideal for creating bespoke control panels in kitchens, utility rooms and workshops.
Installation:
The module clips easily into place from the front of any MK Grid Plus mounting frame - no tools required for module installation. The front-loading design means you can add, remove or reconfigure modules without dismantling the entire installation. Professional installation by a qualified electrician is required for all electrical work.
Grid Plus System Compatibility:
This freezer switch module is compatible with all MK Grid Plus mounting frames and plates:
2-module frames (1-gang plates)
4-module frames (2-gang plates)
6-module frames (3-gang plates)
Available in multiple finishes to match your interior
Technical Specifications:
Model: K4896FZ WHI
Type: 20A double pole freezer switch module
Switching: Double pole (isolates live and neutral)
Current Rating: 20A
Marking: 'FREEZER' clearly printed
Colour: White
Switch Type: Rocker with on/off marking
Module Width: 2 modules (full-width)
Installation: Front-loading clip-in
System: MK Grid Plus modular
SKU: K4896FZ WHI
Note: Mounting frame and grid plate sold separately
Perfect for electricians, contractors and homeowners creating custom electrical installations with the MK Grid Plus modular system. The white finish coordinates with the full Grid Plus range for a professional appearance. Essential for preventing accidental freezer disconnection - protecting your frozen food investment.
MK Grid Plus K4896WDR WHI 20A Double Pole Switch Module - White
This MK Grid Plus 20A double pole dishwasher switch module features clear 'Washer Dryer' marking, providing dedicated control for dishwasher circuits. The white rocker switch offers positive on/off control with double pole switching for complete isolation, preventing accidental dishwasher disconnection.
Key Features:
20A double pole switch module for MK Grid Plus system
Double pole switching isolates both live and neutral
White rocker switch with clear on/off marking
Front-loading design - clips into place from front of mounting frame
Suitable for high-power appliances up to 20A
Modular system allows custom configurations
Compatible with all MK Grid Plus frames and plates
Positive switching action for reliable operation
Part of the comprehensive MK Grid Plus range
Backed by MK quality and reliability
What is Double Pole Switching?
A double pole switch breaks both the live and neutral connections simultaneously, providing complete electrical isolation. This is essential for certain appliances and required by regulations for equipment like water heaters, immersion heaters and some cooking appliances. Single pole switches only break the live connection, whereas double pole switches provide full isolation for safer maintenance and servicing.
Applications:
Immersion heater control
Water heater isolation
Electric cooker circuits
Kitchen appliance control (ovens, hobs)
Workshop equipment isolation
Commercial kitchen installations
Any application requiring full circuit isolation
Why Use MK Grid Plus?
MK Grid Plus is a modular wiring accessory system that allows you to create custom switch and socket configurations to suit your exact requirements. Individual modules (switches, sockets, fuse units, dimmers, data outlets) clip into mounting frames, which are then fitted into standard grid plates. This flexibility makes Grid Plus ideal for kitchens, workshops, offices and anywhere requiring multiple electrical functions in a single location.
Installation:
The module clips easily into place from the front of any MK Grid Plus mounting frame - no tools required for module installation. The front-loading design means you can add, remove or reconfigure modules without dismantling the entire installation. Professional installation by a qualified electrician is required for all electrical work.
Grid Plus System Compatibility:
This 20A double pole switch module is compatible with all MK Grid Plus mounting frames and plates, available in various configurations:
2-module frames (1-gang plates)
4-module frames (2-gang plates)
6-module frames (3-gang plates)
Available in multiple finishes to match your interior
Technical Specifications:
Model: K4896WDR WHI
Type: 20A double pole switch module
Switching: Double pole (isolates live and neutral)
Current Rating: 20A
Colour: White
Switch Type: Rocker with on/off marking
Module Width: 2 modules (full-width)
Installation: Front-loading clip-in
System: MK Grid Plus modular
SKU: K4896WDR WHI
Note: Mounting frame and grid plate sold separately
Perfect for electricians, contractors and homeowners creating custom electrical installations with the MK Grid Plus modular system. The white finish coordinates with the full Grid Plus range for a professional, cohesive appearance. Essential for applications requiring full electrical isolation and compliant with regulations for water heater and immersion heater control.
MK Grid Plus K4890WHI 13A Fuse Unit Module - White
This MK Grid Plus 13A fuse unit module provides individual circuit protection for appliances and equipment within modular grid plate systems. The white fuse carrier comes complete with a 13A cartridge fuse link to BS 1362 and clips easily into MK Grid Plus mounting frames for flexible, customisable electrical installations.
Key Features:
13A fuse unit module for MK Grid Plus system
Supplied complete with 13A cartridge fuse link to BS 1362
White finish to match Grid Plus range
Front-loading design - clips into place from front of mounting frame
Individual circuit protection for appliances
Modular system allows custom configurations
Easy fuse replacement without removing module
Compatible with all MK Grid Plus frames and plates
Compact dimensions: 48mm × 23mm × 32mm
Part of the comprehensive MK Grid Plus range
What is MK Grid Plus?
MK Grid Plus is a modular wiring accessory system that allows you to create custom switch and socket configurations to suit your exact requirements. Individual modules (switches, sockets, fuse units, dimmers, data outlets) clip into mounting frames, which are then fitted into standard grid plates. This flexibility makes Grid Plus ideal for kitchens, workshops, offices and anywhere requiring multiple electrical functions in a single location.
Why Use a Fuse Unit Module?
A fuse unit module provides individual circuit protection for specific appliances or equipment. This is particularly useful for:
Protecting individual appliances in kitchen grid plates
Isolating circuits for easy maintenance
Providing dedicated protection for sensitive equipment
Complying with regulations requiring fused connections
Replacing blown fuses without affecting other circuits
Applications:
Kitchen worktop grid plates (for appliances like microwaves, kettles)
Workshop and garage installations
Office and commercial environments
Laboratory and technical spaces
Retail and hospitality settings
Any location requiring individual circuit protection
Installation:
The module clips easily into place from the front of any MK Grid Plus mounting frame - no tools required for module installation. The front-loading design means you can add, remove or reconfigure modules without dismantling the entire installation. Fuse replacement is equally simple, with the fuse carrier accessible from the front.
Grid Plus System Compatibility:
This fuse unit module is compatible with all MK Grid Plus mounting frames and plates, available in various configurations:
2-module frames (1-gang plates)
4-module frames (2-gang plates)
6-module frames (3-gang plates)
Available in multiple finishes to match your interior
Technical Specifications:
Model: K4890WHI
Type: 13A fuse unit module
Fuse: 13A cartridge fuse link (included)
Standard: BS 1362
Colour: White
Dimensions: 48mm (W) × 23mm (H) × 32mm (D)
Module Width: 1 module (half-width)
Installation: Front-loading clip-in
System: MK Grid Plus modular
Barcode: 5017490224279
SKU: K4890 WHI
What's Included:
1 × MK Grid Plus 13A fuse unit module (white)
1 × 13A cartridge fuse link to BS 1362
Note: Mounting frame and grid plate sold separately
Perfect for electricians, contractors and homeowners creating custom electrical installations with the MK Grid Plus modular system. The white finish coordinates with the full Grid Plus range for a professional, cohesive appearance. Professional installation by a qualified electrician is required.
MK Logic Plus K1522WHILV 2-Gang 2-Way Dimmer Switch - White
This MK Logic Plus 2-gang dimmer switch provides versatile lighting control for multiple lamp types including LED, halogen, incandescent and low voltage lighting. With push on/off operation and smooth dimming control, this white dimmer switch combines functionality with the premium quality MK Electric is renowned for.
Key Benefits:
2-gang 2-way dimmer for independent control of two lighting circuits
Dims LED (4-70W), incandescent (40-300W), mains halogen (40-240W) and LV halogen (40-240VA)
Push on/off operation with smooth rotary dimming control
Suitable for up to 10 lamps or transformers per circuit
Compatible with fully dimmable electronic or wire-wound transformers
White moulded finish to complement modern interiors
Part of the trusted MK Logic Plus range
Complies with BS EN 60669-2-1 standard
Backed by MK's 10-year guarantee
Shallow 25mm mounting depth for easy installation
Compatible Lamp Types:
Dimmable LED: 4-70W
Standard Incandescent: 40-300W
Mains Halogen: 40-240W
Low Voltage Halogen: 40-240VA (via good quality dimmable transformers)
Applications:
Living rooms and dining rooms requiring dual lighting control
Bedrooms with main and accent lighting
Kitchens with task and ambient lighting
Commercial spaces requiring flexible lighting control
Retrofit and new build electrical installations
Technical Specifications:
Type: 2-gang 2-way dimmer switch
Operation: Push on/off with rotary dimming
Voltage: 230V
Power Range: 40-300W per gang
LED Range: 4-70W per gang
Minimum Load: 40W
Maximum Lamps/Transformers: 10 per circuit
Colour: White
Dimensions: 86mm (H) × 86mm (W)
Mounting Depth: 25mm
Fixing Centres: 60.3mm
Mounting: Wall (standard UK back box)
Standard: BS EN 60669-2-1
Guarantee: 10 years
Weight: 0.228kg
Product Range: MK Logic Plus
Barcode: 5017490318886
SKU: K1522WHILV
Installation Notes:
The shallow 25mm mounting depth allows installation in standard UK back boxes. For low voltage halogen installations, ensure transformers are good quality, fully dimmable electronic or wire-wound types rated 40-240VA. Professional installation by a qualified electrician is required and must comply with current IEE Wiring Regulations.
Perfect for electricians, contractors and homeowners seeking reliable, versatile dimming control from a trusted British manufacturer. The MK Logic Plus range is renowned for quality, durability and comprehensive compatibility with modern lamp technologies.
MK Logic Plus K3564DABWHI White Moulded 2 Gang Quad TV/FM/DAB/SATx2 Quadplexer with Telephone Secondary Outlet
Product Description
The MK Logic Plus K3564DABWHI 2 Gang Quadplexer Outlet provides a comprehensive connectivity solution for modern multimedia installations, combining TV, FM radio, DAB radio, twin satellite connections, and a telephone secondary outlet within a single faceplate. Manufactured by MK Electric, this outlet forms part of the trusted Logic Plus AV range.
Designed to meet current broadcast, satellite, and telecommunications installation standards, the outlet enables efficient distribution of multiple signal types from a single location. Manufactured from high-grade urea formaldehyde thermoset material, it offers inherent antibacterial and antiviral properties alongside a clean white moulded finish.
Features & Benefits
2 gang quadplexer outlet with TV, FM, DAB and twin satellite connections
Integrated telephone secondary outlet for added connectivity
Ideal for modern home entertainment and media wall installations
Protected, fully enclosed PCB for enhanced reliability
Single screw termination for secure and straightforward wiring
Manufactured from urea formaldehyde thermoset material
Inherent antibacterial and antiviral properties
Independently tested to ISO 22196:2011 with over 99.99% kill rate
White moulded finish to complement modern interiors
Backed by a 10-year guarantee
Applications
Residential multimedia and media wall installations
Homes with twin satellite tuners or PVR systems
Commercial AV and broadcast environments
Integrated TV, radio, satellite, and telephone connection points
Range Compatibility
Part of the MK Logic Plus TV, FM, DAB, satellite, and data outlet range
Designed to match other MK Logic Plus wiring accessories
2.8 metre Flexi Seal Strip - professional waterproofing upstand for flat shower trays
This MX Flexi Seal Strip transforms flat shower trays into professional tiling installations by creating a flexible waterproof upstand. Engineered for precision waterproofing, this 2.8m strip provides complete coverage for standard shower trays whilst ensuring a watertight seal that accommodates building movement.
Key Benefits:
Creates a professional tiling upstand on flat shower trays
Flexible construction accommodates building movement and settlement
Prevents water leakage at vulnerable tray-to-wall junctions
2.8m length ideal for standard shower tray installations
Easy to install - suitable for professional fitters and competent DIY
Engineered by MX for uncompromising watertight performance
Durable construction ensures lasting protection
Allows tiles to be fitted directly over the upstand
How It Works:
The Flexi Seal Strip is applied to the perimeter of your flat shower tray before installation, creating a flexible upstand that extends above the tray surface. Once the tray is positioned, tiles are fitted over the upstand to create a seamless, waterproof barrier. The flexible design accommodates natural building movement whilst maintaining a permanent watertight seal.
Applications:
Flat shower tray installations
Standard shower enclosures (2.8m coverage)
Wet room shower areas
Bathroom renovations and new builds
Commercial bathroom projects
Walk-in shower installations
Technical Specifications:
Length: 2.8 metres
Type: Flexible waterproofing upstand strip
Application: Flat shower trays
Manufacturer: MX
Installation: Apply to tray perimeter before positioning
Finish: Tile over upstand for seamless waterproofing
SKU: WAY
Why Choose MX Flexi Seal?
MX is renowned for precision-engineered bathroom solutions. This Flexi Seal Strip delivers professional-grade waterproofing that prevents costly water damage and ensures your shower tray installation meets building regulations. The 2.8m length suits most standard shower trays with minimal waste.
Perfect for professional bathroom fitters, plumbers and experienced DIY enthusiasts seeking reliable, long-lasting waterproofing for flat shower tray installations.
💷 SAVE £13 - Was £43, Now Only £30 (30% Off) 💷
✓ Pre-cut 4.0m length - the essential waterproofing solution for larger baths, shower trays and worktops
The Flexi-Seal 4.0m Waterproofing Strip is a professional-grade flexible rubber seal that creates a permanent, watertight barrier between shower trays, baths or worktops and your bathroom walls. Unlike silicone sealant alone, Flexi-Seal maintains a 100% waterproof seal even when subjected to building movement - particularly important in new builds and renovations.
Key Features & Benefits
100% Waterproof Seal – Creates a permanent barrier that won't fail
Flexible Rubber Construction – Accommodates building movement and settlement
Butyl-Based Adhesive – Quick, secure installation with integrated adhesive strip
Concealed Installation – Tiles or panels fit directly over the seal
BS EN 28510-1 Tested – Independently tested to British and European standards
Pre-Cut 4.0m Length – Ideal for larger baths, P-shaped baths, and full-size shower trays
Generous Coverage – Complete coverage with material to spare
Prevents Water Damage – Protects against leakage at vulnerable wall junctions
Professional Grade – Essential for quality bathroom installations
Why 4.0m Length?
This generous 4.0m length is specifically designed for larger bathroom installations:
Large Baths: Complete coverage for three sides of standard 1700mm baths with material to spare
P-Shaped & L-Shaped Baths: Perfect for shaped baths with extended perimeters
Full-Size Shower Trays: Ideal for 900mm, 1000mm, 1200mm shower trays (covers three sides)
Extended Worktops: Suitable for longer bathroom vanity units and countertops
Wet Rooms: Adequate length for larger former installations
Reduced Waste: Right-sized for larger projects without running short
For smaller installations, consider our 2.0m or 3.2m options to minimize waste.
How Flexi-Seal Works
Preparation: Clean and dry the edge of your shower tray, bath or worktop
Application: Remove backing and apply Flexi-Seal to the edge using the butyl adhesive strip
Installation: Position the tray/bath against the wall with the seal extending up the wall surface
Tiling: Fit tiles or wall panels over the flexible rubber seal
Sealing: Apply silicone sealant at the bottom edge for a complete waterproof system
Protection: The flexible seal accommodates building movement without compromising the waterproof barrier
What's Included
Flexi-Seal flexible rubber waterproofing strip (4.0 metres)
Integrated butyl-based adhesive backing
Installation instructions
Technical Specifications
Manufacturer: Spajet
Product: Flexi-Seal waterproofing strip
Length: 4.0 metres (pre-cut)
Width: Typically 100-120mm (upstand + base)
Material: Flexible rubber seal
Adhesive: Butyl-based adhesive strip
Testing: Independently tested to BS EN 28510-1 1993
Waterproof Rating: 100% permanent seal
Application Temperature: 5°C to 35°C
Installation: Apply to tray/bath edge before positioning
Finish: Tile or panel over seal
Coverage: Large baths, P-shaped baths, full-size shower trays, extended worktops
Barcode: 5060134754946
SKU: FLEXI14
Applications & Use Cases
Large Bath Installations: 1700mm, 1800mm standard baths (three sides)
P-Shaped Shower Baths: Extended perimeter coverage
L-Shaped Baths: Complete sealing for shaped bath configurations
Full-Size Shower Trays: 900mm, 1000mm, 1200mm trays
Extended Worktops: Longer vanity units and countertop installations
New Builds: Essential where building movement is expected
Renovations: Upgrade existing installations with superior waterproofing
Commercial Bathrooms: Hotels, gyms, care facilities
Wet Rooms: Larger former edge waterproofing
Why Choose Flexi-Seal Over Silicone Alone?
Traditional silicone sealant is the first line of defence, but it has limitations. Building movement, settlement, and thermal expansion can cause silicone to crack or separate from surfaces over time. Flexi-Seal provides a critical secondary barrier that:
Accommodates building movement without failing
Creates a waterproof membrane behind the tiles
Prevents water from reaching the substrate even if silicone fails
Extends the life of your bathroom installation
Meets and exceeds building regulations for wet areas
Prevents costly water damage, rot, and mould growth
BS EN 28510-1 1993 Testing
Flexi-Seal has been independently tested to BS EN 28510-1 1993, the British and European standard for pressure-sensitive adhesive tapes. This certification confirms:
Adhesive strength and reliability
Performance under stress and movement
Waterproof integrity
Suitability for bathroom applications
Compliance with building regulations
Installation Instructions
Prepare Surface: Ensure shower tray, bath or worktop edges are clean, dry, and dust-free
Measure & Cut: 4.0m length is pre-cut; trim if needed for your specific installation
Remove Backing: Peel away the protective backing to expose the butyl adhesive
Apply Strip: Press Flexi-Seal firmly onto the edge, ensuring good adhesion along the entire length
Position Item: Install the tray, bath or worktop with the seal extending up the wall
Tile Over: Apply tiles or wall panels over the upstand portion of the seal
Seal Base: Once tiling is complete, apply silicone sealant to the bottom edge
Cure: Allow silicone to cure as per manufacturer's instructions
Professional Tips
Always use neutral cure silicone (not acetic/vinegar cure) to avoid damaging the seal
Apply to clean, dry surfaces for maximum adhesion
Work in temperatures between 5°C and 35°C for best results
Press firmly along the entire length to ensure complete adhesion
Ensure the upstand extends high enough to be covered by tiles/panels
For P-shaped or L-shaped baths, measure the full perimeter before cutting
When Flexi-Seal is NOT Required
Important Note: Flexi-Seal is not required if using a shower tray with an integrated upstand option, as these trays already incorporate the waterproofing feature. Check your shower tray specifications before purchasing.
Building Regulations Compliance
Flexi-Seal helps ensure compliance with UK Building Regulations Part C (Site Preparation and Resistance to Contaminants and Moisture) by providing effective waterproofing in wet areas. The dual-layer approach (flexible seal + silicone) is considered best practice by professional bathroom installers and exceeds minimum requirements.
Length Comparison Guide
2.0m Length: Ideal for compact showers (700-800mm), smaller baths, worktops
3.2m Length: Perfect for standard shower trays and baths (covers three sides)
4.0m Length (this product): Best for large baths, P-shaped baths, full-size shower trays - generous coverage with material to spare
Choose the length that best matches your installation to ensure complete coverage without running short.
Coverage Examples
Standard 1700mm Bath (three sides):
Two long sides: 1700mm × 2 = 3400mm
One short end: 700mm
Total required: 4100mm (4.1m)
4.0m length provides near-complete coverage
1200mm Shower Tray (three sides):
Two sides: 1200mm × 2 = 2400mm
One side: 800mm
Total required: 3200mm (3.2m)
4.0m length provides complete coverage with 800mm to spare
About Spajet
Spajet specializes in professional waterproofing and bathroom installation products. Their Flexi-Seal range is trusted by professional installers, bathroom fitters, and builders across the UK for reliable, long-lasting protection against water damage.
Perfect for: Professional bathroom installers, plumbers, tilers, builders, property developers, and competent DIY enthusiasts seeking reliable, tested waterproofing for larger bathroom installations that exceeds building regulations and prevents costly water damage.
🛡️ PROFESSIONAL WATERPROOFING: Pre-Cut 4.0m Strip - Save £13 🛡️
💷 SAVE £6 - Was £23, Now Only £17 (26% Off) 💷
✓ Pre-cut 2.0m length - the essential waterproofing solution for baths, shower trays and worktops
The Flexi-Seal Waterproofing Strip is a professional-grade flexible rubber seal that creates a permanent, watertight barrier between shower trays, baths or worktops and your bathroom walls. Unlike silicone sealant alone, Flexi-Seal maintains a 100% waterproof seal even when subjected to building movement - particularly important in new builds and renovations.
Key Features & Benefits
100% Waterproof Seal – Creates a permanent barrier that won't fail
Flexible Rubber Construction – Accommodates building movement and settlement
Butyl-Based Adhesive – Quick, secure installation with integrated adhesive strip
Concealed Installation – Tiles or panels fit directly over the seal
BS EN 28510-1 Tested – Independently tested to British and European standards
Pre-Cut 2.0m Length – Ideal for compact showers and smaller baths
Prevents Water Damage – Protects against leakage at vulnerable wall junctions
Professional Grade – Essential for quality bathroom installations
Why 2.0m Length?
This pre-cut 2.0m length is specifically designed for compact bathroom installations:
Compact Shower Trays: Perfect for 700mm or 800mm square shower trays (covers two sides)
Smaller Baths: Ideal for short bath ends or single-side sealing
Worktop Sealing: Suitable for bathroom vanity units and countertops
Minimal Waste: Right-sized for smaller projects without excess material
For larger installations requiring more coverage, consider our 3.2m or per-metre options.
How Flexi-Seal Works
Preparation: Clean and dry the edge of your shower tray, bath or worktop
Application: Remove backing and apply Flexi-Seal to the edge using the butyl adhesive strip
Installation: Position the tray/bath against the wall with the seal extending up the wall surface
Tiling: Fit tiles or wall panels over the flexible rubber seal
Sealing: Apply silicone sealant at the bottom edge for a complete waterproof system
Protection: The flexible seal accommodates building movement without compromising the waterproof barrier
What's Included
Flexi-Seal flexible rubber waterproofing strip (2.0 metres)
Integrated butyl-based adhesive backing
Installation instructions
Technical Specifications
Manufacturer: Spajet
Product: Flexi-Seal waterproofing strip
Length: 2.0 metres (pre-cut)
Width: Typically 100-120mm (upstand + base)
Material: Flexible rubber seal
Adhesive: Butyl-based adhesive strip
Testing: Independently tested to BS EN 28510-1 1993
Waterproof Rating: 100% permanent seal
Application Temperature: 5°C to 35°C
Installation: Apply to tray/bath edge before positioning
Finish: Tile or panel over seal
Coverage: Compact shower trays, smaller baths, worktops
Barcode: 506134754915
SKU: FLEXI2
Applications & Use Cases
Compact Shower Trays: 700mm, 800mm square or quadrant trays
Bath Installations: Short ends or single-side sealing
Bathroom Worktops: Vanity units and countertop sealing
New Builds: Essential where building movement is expected
Renovations: Upgrade existing installations with superior waterproofing
Commercial Bathrooms: Hotels, gyms, care facilities
Wet Rooms: Additional waterproofing for former edges
Why Choose Flexi-Seal Over Silicone Alone?
Traditional silicone sealant is the first line of defence, but it has limitations. Building movement, settlement, and thermal expansion can cause silicone to crack or separate from surfaces over time. Flexi-Seal provides a critical secondary barrier that:
Accommodates building movement without failing
Creates a waterproof membrane behind the tiles
Prevents water from reaching the substrate even if silicone fails
Extends the life of your bathroom installation
Meets and exceeds building regulations for wet areas
Prevents costly water damage, rot, and mould growth
BS EN 28510-1 1993 Testing
Flexi-Seal has been independently tested to BS EN 28510-1 1993, the British and European standard for pressure-sensitive adhesive tapes. This certification confirms:
Adhesive strength and reliability
Performance under stress and movement
Waterproof integrity
Suitability for bathroom applications
Compliance with building regulations
Installation Instructions
Prepare Surface: Ensure shower tray, bath or worktop edges are clean, dry, and dust-free
Measure & Cut: 2.0m length is pre-cut; trim if needed for your specific installation
Remove Backing: Peel away the protective backing to expose the butyl adhesive
Apply Strip: Press Flexi-Seal firmly onto the edge, ensuring good adhesion along the entire length
Position Item: Install the tray, bath or worktop with the seal extending up the wall
Tile Over: Apply tiles or wall panels over the upstand portion of the seal
Seal Base: Once tiling is complete, apply silicone sealant to the bottom edge
Cure: Allow silicone to cure as per manufacturer's instructions
Professional Tips
Always use neutral cure silicone (not acetic/vinegar cure) to avoid damaging the seal
Apply to clean, dry surfaces for maximum adhesion
Work in temperatures between 5°C and 35°C for best results
Press firmly along the entire length to ensure complete adhesion
Ensure the upstand extends high enough to be covered by tiles/panels
When Flexi-Seal is NOT Required
Important Note: Flexi-Seal is not required if using a shower tray with an integrated upstand option, as these trays already incorporate the waterproofing feature. Check your shower tray specifications before purchasing.
Building Regulations Compliance
Flexi-Seal helps ensure compliance with UK Building Regulations Part C (Site Preparation and Resistance to Contaminants and Moisture) by providing effective waterproofing in wet areas. The dual-layer approach (flexible seal + silicone) is considered best practice by professional bathroom installers and exceeds minimum requirements.
Comparison: 2.0m vs 3.2m Length
2.0m Length (this product): Ideal for compact showers, smaller baths, worktops - less waste for smaller projects
3.2m Length: Perfect for standard shower trays and baths (covers three sides) - see our separate listing
Choose the length that best matches your installation to minimize waste and cost.
About Spajet
Spajet specializes in professional waterproofing and bathroom installation products. Their Flexi-Seal range is trusted by professional installers, bathroom fitters, and builders across the UK for reliable, long-lasting protection against water damage.
Perfect for: Professional bathroom installers, plumbers, tilers, builders, property developers, and competent DIY enthusiasts seeking reliable, tested waterproofing for compact bathroom installations that exceeds building regulations and prevents costly water damage.
🛡️ PROFESSIONAL WATERPROOFING: Pre-Cut 2.0m Strip - Only £17 🛡️
💧 PROFESSIONAL VALUE: Save £23.30 - Was £55.30, Now Only £32 (42% Off) 💧
✓ Pre-cut 3.2m length - perfect for standard shower trays and baths
The Classi Seal Waterproofing Strip is a professional-grade, self-adhesive tanking solution designed to create a reliable secondary seal between shower trays or baths and bathroom walls. This flexible waterproofing strip prevents water ingress caused by building movement and settlement, offering superior long-term protection compared to silicone sealant alone.
Key Features & Benefits
Pre-Cut 3.2m Length – Ideal for standard shower trays and baths (covers three sides)
Accommodates 15mm Movement – Flexes with building settlement without compromising the seal
Self-Adhesive Backing – Quick, easy installation with no mess or waiting
Immediate Tiling – No curing time required, tile straight away
Superior to Silicone Alone – Creates a watertight barrier that lasts longer
Professional Finish – Combines with neutral cure silicone for complete protection
Flexible Strip Design – Conforms perfectly to shower tray and bath edges
Prevents Leak Damage – Protects against costly water damage and mould growth
Why 3.2m Length?
This pre-cut 3.2m length is specifically designed for standard UK shower trays and baths. It provides enough material to seal three sides (typically two long edges at 900mm each and one short edge at 700-800mm) with minimal waste. This eliminates guesswork, reduces material waste, and ensures you have exactly what you need for typical bathroom installations.
How Classi Seal Works
Classi Seal creates a dual-layer waterproofing system that far exceeds the protection offered by silicone sealant alone:
Application: The self-adhesive strip is applied to the wall-facing edges of the shower tray or bath before installation
Installation: The tray/bath is positioned, and the upstand portion of the strip extends up the wall
Tiling: Tiles are applied over the upstand, creating a waterproof barrier behind the tiles
Sealing: The bottom edge is sealed with neutral cure silicone for a complete watertight seal
Protection: The flexible strip accommodates up to 15mm of building movement without cracking or leaking
Technical Specifications
Manufacturer: Classi
Product: Waterproofing tanking strip
Length: 3.2 metres (pre-cut)
Width: Typically 100-120mm (upstand + base)
Type: Self-adhesive flexible strip
Movement Accommodation: Up to 15mm
Adhesive: Pressure-sensitive self-adhesive backing
Material: Flexible waterproof membrane
Application Temperature: 5°C to 35°C
Suitable Surfaces: Clean, dry, dust-free surfaces
Finish: Tile over upstand, seal base with neutral cure silicone
Coverage: Standard shower tray or bath (3 sides)
Barcode: 5060062840094
SKU: CS032
Applications & Use Cases
Shower Tray Installations: Seal between tray and wall on three sides
Bath Installations: Waterproof bath-to-wall junctions
Wet Rooms: Additional waterproofing for former edges
Bathroom Renovations: Upgrade existing installations with superior protection
New Builds: Professional waterproofing for new bathroom projects
Commercial Bathrooms: Hotels, gyms, care facilities, schools
Why Choose Classi Seal Over Silicone Alone?
Traditional silicone sealant is the first line of defence, but it has limitations. Building movement, settlement, and thermal expansion can cause silicone to crack or separate from surfaces over time. Classi Seal provides a critical secondary barrier that:
Accommodates building movement without failing
Creates a waterproof membrane behind the tiles
Prevents water from reaching the substrate even if silicone fails
Extends the life of your bathroom installation
Meets and exceeds building regulations for wet areas
Prevents costly water damage, rot, and mould growth
Installation Instructions
Prepare Surface: Ensure shower tray or bath edges are clean, dry, and dust-free
Apply Strip: Remove backing and apply Classi Seal to the wall-facing edges of the tray/bath
Press Firmly: Ensure good adhesion along the entire length
Position Tray/Bath: Install the tray or bath with the upstand against the wall
Tile Over: Apply tiles over the upstand portion of the strip
Seal Base: Once tiling is complete, apply neutral cure silicone to the bottom edge
Cure: Allow silicone to cure as per manufacturer's instructions
What You'll Need
Classi Seal 3.2m strip (this product)
Neutral cure silicone sealant
Silicone gun
Clean cloth and degreaser for surface preparation
Scissors or knife for trimming (if required)
Professional Tips
Always use neutral cure silicone (not acetic/vinegar cure) to avoid damaging the strip
Apply to clean, dry surfaces for maximum adhesion
Work in temperatures between 5°C and 35°C for best results
Press firmly along the entire length to ensure complete adhesion
Trim excess length with scissors or a sharp knife if needed
Building Regulations Compliance
Classi Seal helps ensure compliance with UK Building Regulations Part C (Site Preparation and Resistance to Contaminants and Moisture) by providing effective waterproofing in wet areas. The dual-layer approach (tanking strip + silicone) is considered best practice by professional bathroom installers and exceeds minimum requirements.
About Classi
Classi specializes in professional waterproofing and tanking solutions for the bathroom industry. Their products are trusted by professional installers, bathroom fitters, and builders across the UK for reliable, long-lasting protection against water damage.
Perfect for: Professional bathroom installers, plumbers, tilers, builders, property developers, and competent DIY enthusiasts seeking reliable, professional-grade waterproofing that exceeds building regulations and prevents costly water damage.
🛡️ PROFESSIONAL WATERPROOFING: Pre-Cut 3.2m Strip - Save £23.30 🛡️
Transform your bathroom with this innovative ProofVision in-wall electric toothbrush charger. Designed to eliminate countertop clutter and messy charging cables, this sleek charging solution integrates seamlessly into your bathroom wall for a clean, minimalist aesthetic.
Key Benefits:
Eliminates unsightly charging cables and countertop clutter
Wire-free charging - simply place your toothbrush in the holder
Flush-mounted design for a premium, integrated look
IP44 rated for safe installation in bathroom zone 2
Easy installation in standard dual gang 47mm backbox
Choice of 4 finishes to match your bathroom décor
(Only White Stocked, Message for other finishjs)
Perfect for modern, minimalist bathroom designs
Frees up valuable worktop and shelf space
Compatibility:
Compatible with: Oral-B io2, io3, io4, io5 and io6 models
Not compatible with: Oral-B io7, io8, io9, io10 or Pulsonic series
Technical Specifications:
Type: In-wall electric toothbrush charger
Capacity: Single toothbrush
Installation: Dual gang 47mm backbox required
IP Rating: IP44 (Zone 2 bathroom safe)
Standard Finish: White plastic
Optional Finishes: 3 additional faceplate options available
Charging Method: Wireless inductive charging
SKU: PV10P
What's Included:
In-wall charger unit with white faceplate
Installation instructions
Note: Toothbrush not included
Ideal for bathroom renovations, new builds and anyone seeking a clutter-free, hotel-style bathroom finish. Professional installation recommended. Please verify your Oral-B model compatibility before ordering.
Transform your bathroom with this innovative ProofVision dual in-wall electric toothbrush charger. Designed to charge two toothbrushes simultaneously whilst eliminating countertop clutter and messy charging cables, this sleek charging solution integrates seamlessly into your bathroom wall for a clean, minimalist aesthetic.
Key Benefits:
Charges two toothbrushes simultaneously - perfect for couples
Eliminates unsightly charging cables and countertop clutter
Wire-free charging - simply place your toothbrushes in the holders
Flush-mounted design for a premium, integrated look
IP44 rated for safe installation in bathroom zone 2
Easy installation in standard dual gang 47mm backbox
Choice of 5 finishes to match your bathroom décor
Perfect for modern, minimalist bathroom designs
Frees up valuable worktop and shelf space
Compatibility:
Compatible with: Oral-B io2, io3, io4, io5 and io6 models
Not compatible with: Oral-B io7, io8, io9, io10 or Pulsonic series
Technical Specifications:
Type: In-wall dual electric toothbrush charger
Capacity: Two toothbrushes (charges simultaneously)
Installation: Dual gang 47mm backbox required
IP Rating: IP44 (Zone 2 bathroom safe)
Standard Finish: White plastic
Optional Finishes: 4 additional faceplate options available
Charging Method: Wireless inductive charging
SKU: 175.PV11P
What's Included:
Dual in-wall charger unit with white faceplate
Installation instructions
Note: Toothbrushes not included
Ideal for ensuite bathrooms, family bathrooms, bathroom renovations and new builds. Perfect for couples seeking a clutter-free, hotel-style bathroom finish. Professional installation recommended. Please verify your Oral-B model compatibility before ordering.
💷 EXCEPTIONAL VALUE: Save £54 - Was £163, Now Only £109 (33% Off) 💷
The Charaton Chrome Basin Mixer Tap combines contemporary design with practical low-pressure compatibility, making it perfect for gravity-fed systems and properties with lower water pressure. Featuring a sleek chrome finish, innovative hidden adjustable flow direction, and complete with basin waste, this deck-mounted mono mixer delivers reliable performance backed by an impressive 3-5 year guarantee.
Key Features & Benefits
Low Pressure Compatible – Works perfectly with 0.5 bar minimum pressure (gravity-fed systems)
Basin Waste Included – Complete package ready for installation
Hidden Adjustable Flow Direction – Innovative feature allows you to direct water flow precisely
Premium Chrome Finish – Lustrous, corrosion-resistant coating for lasting beauty
Deck-Mounted Design – Single-hole installation for basins and countertops
Compact Dimensions – 159mm height fits most basin configurations
Extended Guarantee – 5 years on body and finish, 3 years on valves
Replaces Finissimo – Direct replacement for discontinued Finissimo Basin Mixer
What's Included
Charaton chrome basin mixer tap
Basin waste (slotted or unslotted - please specify if required)
Flexible tap tails (hot and cold connections)
Mounting hardware and fixings
Installation instructions
3-year guarantee on valves
5-year guarantee on body and finish
Technical Specifications
Manufacturer: Aqua Elegance
Range: Charaton
Finish: Chrome plated
Type: Mono mixer (single-lever control)
Installation: Deck-mounted (single-hole)
Overall Height: 159mm
Depth: 151.5mm
Width: 50mm
Spout Reach: Approx. 120mm (from mounting point)
Hole Diameter Required: 35mm (standard UK size)
Connection Type: Flexible tap tails (included)
Connection Size: 15mm (½" BSP)
Minimum Water Pressure: 0.5 bar
Maximum Water Pressure: 5.0 bar
Suitable for: Hot and cold water supply
Valve Guarantee: 3 years
Body & Finish Guarantee: 5 years
Barcode: 5054913487231
SKU: BGBP105726
Low Pressure Compatibility Explained
With a minimum operating pressure of just 0.5 bar, the Charaton basin mixer is ideal for gravity-fed systems, older properties, and installations where water pressure is limited. Many standard taps require 1.0 bar or higher, making them unsuitable for low-pressure systems. This tap is specifically engineered to deliver smooth, reliable operation even at 0.5 bar, ensuring consistent performance without the need for pumps or pressure boosters.
Hidden Adjustable Flow Direction
The innovative hidden adjustable flow direction feature allows you to fine-tune where the water stream lands in your basin. This is particularly useful for optimizing water flow to avoid splashing, directing water away from soap dishes or toothbrush holders, or adjusting for different basin shapes. The adjustment mechanism is concealed within the tap body, maintaining the clean, minimalist aesthetic.
Replaces Finissimo Basin Mixer
If you're looking to replace the discontinued Finissimo Basin Mixer & Waste in Chrome, the Charaton is the recommended direct replacement. It offers similar dimensions, low-pressure compatibility, and contemporary styling, making it an ideal upgrade or replacement option for existing Finissimo installations.
Installation & Compatibility
Designed for deck-mounted installation on bathroom basins, countertops, or vanity units with a single 35mm diameter hole. Compatible with standard UK 15mm hot and cold water supplies. Flexible tap tails included for easy connection to isolation valves or direct to pipework. Suitable for all plumbing systems including gravity-fed, combi boiler, and unvented systems with minimum 0.5 bar pressure. Professional installation recommended, though suitable for competent DIY with basic plumbing knowledge.
Water Pressure Requirements
Minimum pressure: 0.5 bar (perfect for gravity-fed systems and low-pressure installations)
Recommended pressure: 1.0-3.0 bar for optimal performance
Maximum pressure: 5.0 bar (pressure reducing valve recommended if supply exceeds this)
Guarantee Coverage
This tap comes with comprehensive dual guarantee coverage:
5-Year Guarantee: Covers the tap body and chrome finish against manufacturing defects, corrosion, and tarnishing
3-Year Guarantee: Covers all internal valves, cartridges, and moving parts against mechanical failure
This extended guarantee demonstrates the manufacturer's confidence in product quality and provides long-term peace of mind.
Maintenance & Care
The chrome finish wipes clean with a soft, damp cloth. Avoid abrasive cleaners, scouring pads, or limescale removers containing acids that may damage the plating. In hard water areas, regular cleaning prevents limescale buildup. The ceramic disc cartridge provides smooth, drip-free operation with minimal maintenance required.
Applications
Perfect for residential bathrooms, en-suites, cloakrooms, guest bathrooms, and commercial washrooms. Particularly suited to properties with gravity-fed water systems, older homes with lower pressure, and installations where standard taps don't perform adequately. Ideal for wall-hung basins, countertop basins, semi-recessed basins, and vanity unit installations.
Contemporary Design
The Charaton range features clean, minimalist lines with a gently curved spout and ergonomic single-lever control. The compact 159mm height makes it suitable for most basin configurations without overwhelming smaller basins. The polished chrome finish coordinates beautifully with modern bathroom accessories, shower fittings, and contemporary sanitaryware.
About Aqua Elegance
Aqua Elegance specializes in quality bathroom taps and fittings, combining thoughtful design with reliable engineering. Their products are backed by comprehensive guarantees and designed to meet the demands of both residential and commercial installations.
Perfect for: Homeowners with low-pressure systems, property developers, bathroom installers, plumbers, and anyone seeking a reliable, contemporary basin mixer that works perfectly with gravity-fed water supplies.
🔥 SAVE £54: Premium Low-Pressure Basin Mixer with Waste - Limited Stock 🔥
Transform your bathroom with this premium slim concealed cistern featuring dual flush technology (6/4L) for water efficiency and modern aesthetics. Designed for professional installations behind the wall or BTW pans, this WRAS-approved cistern delivers reliable performance in compact spaces.
Key Features & Benefits
Space-Saving Design: Ultra-slim profile (104mm depth) perfect for tight installations
Dual Flush Efficiency: 6/4L flush options reduce water consumption and utility costs
Front Access Panel: Easy maintenance without wall removal
Top Inlet Connection: Flexible plumbing configuration
Universal Compatibility: Works with BTW (back-to-wall) pans and wall hung toilets
WRAS Approved: Certified fittings meet UK water regulations
Professional Quality: Built for durability with 2-year manufacturer guarantee
Technical Specifications
Overall Dimensions: H 930mm x W 460mm x D 104mm
Height excluding pipe: 452mm
Flush Volume: 6L/4L dual flush
Inlet Position: Top inlet
Access: Front accessible for servicing
Installation: Suitable for fixing into supporting wall (not compatible with WC furniture units)
Certification: WRAS approved components
Warranty: 2 Year Guarantee included
Ideal for: Bathroom renovations, new builds, cloakrooms, and en-suites where space is at a premium. Perfect for creating a seamless, minimalist aesthetic with concealed plumbing.
Elevate your bathroom with this premium round push button flushplate in a sophisticated brushed brass finish. Designed for modern concealed cistern systems, this fingerprint-proof flushplate combines luxury aesthetics with practical functionality.
Key Features
Premium Brushed Brass Finish: Fingerprint-proof coating maintains pristine appearance
Compact Dimensions: H 163mm x W 245mm x D 50mm - perfect for contemporary bathrooms
Round Design: Elegant circular aesthetic complements modern bathroom fixtures
Compatible: Designed for use with frames and slim concealed cisterns (works with Slim Cistern BGBP109017)
Quality Assured: Backed by a 2-year manufacturer guarantee
Easy Maintenance: Fingerprint-resistant surface for effortless cleaning
Product Specifications
Material: Brushed brass with protective coating
Installation: For concealed cistern systems
Style: Contemporary round design
Finish: Brushed brass (fingerprint-proof)
Why Choose This Flushplate?
This brushed brass flushplate transforms a functional bathroom element into a design statement. The fingerprint-proof finish ensures your bathroom maintains its spa-like luxury appearance with minimal maintenance, while the warm brass tones add a touch of premium elegance to any modern bathroom scheme.
