Prima

A contemporary Prima Staten tap in chrome with a polished finish Tap Dimensions: Overall Height - 336.5mm; Spout Height - 245mm; Spout Reach - 171.6mm; Base/Handle Width - 137.5mm This tap requires a minimum water pressure of 0.1 bar to operate properly WRAS approved Quarter turn operation Single flow tap Comes with a 5 year manufacturer's guarantee on the tap body & finish, 3 Year on the valves and 1 year on serviceable parts Please note: Warranty does not apply to goods that have been incorrectly installed, used or maintained outside of normal domestic conditions.

Read more less

A classic Prima tap in chrome with a polished finish Tap Dimensions: Overall Height - 227mm; Spout Height - 194mm; Spout Reach - 224mm; Base/Handle Width - 149mm This tap requires a minimum water pressure of 0.1 bar to operate properly WRAS approved Comes with a 5 year manufacturer's guarantee on the tap body & finish, 3 Year on the valves and 1 year on serviceable parts Please note: Warranty does not apply to goods that have been incorrectly installed, used or maintained outside of normal domestic conditions.

Read more less

A contemporary Prima tap in chrome with a polished finish Tap Dimensions: Overall Height - 174mm; Spout Height - 151.2mm; Spout Reach - 212mm; Base/Handle Width - 51mm This tap requires a minimum water pressure of 0.1 bar to operate properly WRAS approved Comes with a 5 year manufacturer's guarantee on the tap body & finish, 3 Year on the valves and 1 year on serviceable parts Please note: Warranty does not apply to goods that have been incorrectly installed, used or maintained outside of normal domestic conditions.

Read more less

Pack contains: Prima PRSO101 B/I Single Electric Fan Oven - St/Steel Prima PRGH106 60cm Gas Hob (Enamelled) - St/Steel Prima PRCH032 60cm Chimney Hood - St/Steel Product details as follows: A built in Prima single electric oven in stainless steel 60 litre capacity Dimensions: H 595 x W 595 x D 565mm Energy Efficiency - A Cleaning sytem: Easy clean enamel Operating Method - Rotary knobs A Built In Prima Gas Hob in Stainless Steel Number of Cooking Zones - 4 Dimensions: H 42 x W 590 x D 520mm Enamelled Pan Supports Operating Method - Side Rotary Knobs A Wall Mounted Prima Chimney Hood in Stainless Steel Dimensions: H 583-898 x W 600 x D 450mm Maximum extraction: 379 m³/h Noise Level: 60 dB(A) Includes 2x 2.8W E14 LED Lights 3 Speed Settings To register your warranty, please visit: http://primaappliancecare.co.uk/ All appliances come with 5 Year Parts & 2 Year Labour Guarantee

Read more less

Transform your kitchen with the Prima PRCH401 60cm Visor Hood in sleek grey. This bold extractor delivers serious performance with 216 m³/h maximum extraction and whisper-quiet 70 dB(A) operation. Command three speed settings to match your cooking intensity, while the integrated 2.8W E14 LED light cuts through steam and smoke. Compact dimensions (H 80 x W 600 x D 465mm) fit seamlessly into any cabinet setup. Backed by an impressive 5-year parts and 2-year labour guarantee—register at primaappliancecare.co.uk to activate your coverage. Engineered for kitchens that demand more.

Read more less

Includes 1.5 bowl Inset sink and chrome single lever WRAS approved tap Sink Dimensions: W 965 x D 500 x H 155mm Reversible Sink Cut-out Dimensions: W 947mm x D 482mm Suitable for cabinet widths of 600mm or greater Main Bowl Dimensions: W 346 x D 396 x H 155mm Second Bowl Dimensions: W 170 x D 320 x H 80mm Made from 0.6mm gauge stainless steel Pre-drilled tap holes Box also contains waste, and single lever tap CPR108 pipework & plumbing kit (optional) Comes with 20 year guarantee on the sink & 5 year manufacturer's guarantee on the tap body & finish, 3 Year on the valves and 1 year on serviceable parts Please note: Tap warranty does not apply to goods that have been incorrectly installed, used or maintained outside of normal domestic conditions. Tap is suitable for a minimum of 0.3 bar water pressure or above Flow aerator for controlled water delivery Fully WRAS approved

Read more less

Includes 1 bowl compact Inset sink and chrome single lever WRAS approved tap Sink Dimensions: W 860 x D 500 x H 170mm Reversible Sink Cut-out Dimensions: W 842mm x D 482mm Suitable for cabinet widths of 500mm or greater Main Bowl Dimensions: W 380 x D 400 x H 170mm Made from 0.6mm gauge stainless steel Pre-drilled tap holes Box contains waste, overflow and single lever tap CPR106 pipework & plumbing kit (optional) Comes with 20 year guarantee on the sink & 5 year manufacturer's guarantee on the tap body & finish, 3 Year on the valves and 1 year on serviceable parts Please note: Tap warranty does not apply to goods that have been incorrectly installed, used or maintained outside of normal domestic conditions. Tap is suitable for a minimum of 0.3 bar water pressure or above Flow aerator for controlled water delivery Fully WRAS approved

Read more less