Downlight

Never fumble for a light switch again. The Riga Motion is a premium 7W IP65 fire rated LED downlight with a built-in PIR motion sensor — perfect for bathrooms, hallways, landings, and utility rooms where hands-free convenience matters. Motion is detected within a 6-metre radius and the light switches on instantly, then turns itself off automatically once the space is clear. What sets the Riga Motion apart is its switchable colour temperature: choose between 2700K, 3000K, 4000K, or 6000K using the integrated switch on the fitting, so you can dial in the perfect ambience for any room. It's also fully dimmable from most standard wall dimmers, and with a CRI of >90 and output equivalent to a 50W GU10 halogen, the light quality is exceptional — using 85% less energy. Available with a white, chrome, or black bezel to suit your interior. Replacement and additional bezels are available separately. Key Features Built-in PIR motion sensor — 6m detection radius, 30–60° detection angle Adjustable PIR settings — timer 5 sec to 10 min; sensitivity 0.1m–4m; lux level 0–1000 Lux 8-hour override — double-press the wall switch to hold the light on for 8 hours Switchable CCT — 2700K / 3000K / 4000K / 6000K via integrated switch Fully dimmable — compatible with most standard trailing-edge wall dimmers 7W LED — equivalent to 50W GU10 halogen; 85% energy saving CRI >90 — excellent colour rendering for bathrooms and living spaces IP65 rated — fully splash-proof; suitable for bathroom zones Fire rated — maintains ceiling fire integrity IC rated — safe for loft insulation to run continuously over the fitting Loop in / loop out — clip block for easy daisy-chain wiring Built-in power converter — no separate driver required Choice of bezel — white, chrome, or black 5-year warranty Technical Specification Rated Voltage 240V Wattage 7W Halogen Equivalent 50W GU10 Colour Temperature 2700K / 3000K / 4000K / 6000K (switchable) Colour Rendering Index (CRI) >90 Beam Angle 60° Dimmable Yes (trailing-edge dimmer) Sensor Type PIR (Passive Infrared) Detection Radius 6m Detection Angle 30–60° Timer Range 5 seconds – 10 minutes PIR Sensitivity Range 0.1m – 4m Lux Level Range 0 – 1000 Lux IP Rating IP65 Fire Rated Yes IC Rated Yes Mounting Recessed Diameter 85mm Depth 44mm Cut-Out 70mm Appliance Class F Bezel Options White, Chrome, Black Warranty 5 years Brand SycamoreLED Frequently Asked Questions Which bathroom zones is the Riga Motion suitable for? With an IP65 rating, the Riga Motion is suitable for use in bathroom Zone 1 (directly above the bath or shower) and Zone 2. Always consult a qualified electrician to confirm zone suitability for your specific installation. How do I change the colour temperature? The colour temperature is switched using the integrated selector on the fitting itself — choose between 2700K (warm white), 3000K (soft white), 4000K (cool white), or 6000K (daylight) before or during installation. Can I override the PIR and keep the light on continuously? Yes — double-pressing the wall switch will hold the light on for 8 hours. After 8 hours, the fitting automatically reverts to PIR motion-sensor mode. Is it compatible with my existing dimmer switch? The Riga Motion is compatible with most standard trailing-edge (LED) wall dimmers. We recommend checking your dimmer manufacturer's LED compatibility list. If in doubt, contact us at customerservice@bubblegumbathrooms.co.uk. Does it need a separate LED driver? No — the Riga Motion has a built-in power converter, so no separate driver is required. It wires directly to your mains supply. Is it safe to install with loft insulation above? Yes — the Riga Motion is IC rated, meaning loft insulation can be run continuously over the back of the fitting without any risk of overheating. Can I order if the item shows as out of stock? Yes — you can still place your order and we will despatch as soon as stock is available. For lead time estimates, please contact us at customerservice@bubblegumbathrooms.co.uk. I have a question not answered here — how do I get in touch? Please email us at customerservice@bubblegumbathrooms.co.uk and we'll be happy to help. Complete the Riga Range Accessories and related products to complement your Riga Motion downlight: Riga PIR Replacement & Additional Bezels — White, Chrome & Black Fire-Rated LED Downlight Switchable 3.5W/5W — Standard (Non-PIR)

Read more less

Fire-Rated LED Downlight with Bezel - Switchable 3.5W/5W and Colour Temperature This versatile fire-rated LED downlight offers exceptional flexibility with face-switchable wattage (3.5W or 5W) and three colour temperature options (3000K, 4000K, 5700K), all adjustable from beneath the ceiling without removing the fitting. Perfect for new builds, renovations and commercial installations where lighting requirements may change. Key Features & Benefits Switchable Wattage – 3.5W (480 lumens) or 5W (700 lumens) selectable from beneath ceiling Three Colour Temperatures – 3000K warm white, 4000K natural white, 5700K cool white Fire-Rated Construction – Complies with building regulations for ceiling integrity Two-Part First Fix Connector – Simplifies installation with dedicated testing terminals Double Hinged Terminal – Easy access to wiring connections Universal Ceiling Compatibility – Tested for solid, I-joist, steel web joist and PVC clad ceilings 6 Bezel Finishes Available – White, chrome, brushed nickel, black, brass, anthracite No Stock Complexity – One product suits all applications Switchable Wattage Options Adjust the light output to suit your needs without changing the fitting: 3.5W Mode: 480 lumens – Ideal for ambient lighting, bedrooms, hallways, and areas requiring softer illumination 5W Mode: 700 lumens – Perfect for task lighting, kitchens, bathrooms, and areas needing brighter illumination The switchable wattage feature allows you to optimize energy consumption while maintaining the flexibility to increase brightness when needed. Switchable Colour Temperature Options Select the perfect colour temperature for each room or application: 3000K Warm White: Creates a cosy, relaxing atmosphere – perfect for living rooms, bedrooms, and dining areas 4000K Natural White: Neutral, versatile lighting – ideal for kitchens, hallways, and multi-purpose spaces 5700K Cool White: Bright, crisp illumination – excellent for bathrooms, offices, and task-oriented areas All colour temperature adjustments are made from beneath the ceiling using a simple switch – no need to remove the fitting or access the ceiling void. What's Included Fire-rated LED downlight body White bezel (standard) Two-part first fix connector Double hinged terminal block Installation instructions Note: Alternative bezel finishes (chrome, brushed nickel, black, brass, anthracite) available separately. Technical Specifications Wattage: 3.5W or 5W (face-switchable) Light Output: 480 lumens (3.5W) or 700 lumens (5W) Colour Temperature: 3000K / 4000K / 5700K (face-switchable) Fire Rating: Yes (fire-rated construction) Cut-Out Diameter: Typically 65-75mm (check specifications) Depth: Typically 70-80mm (check specifications) Voltage: 220-240V AC Beam Angle: Typically 60-90° IP Rating: IP20 (suitable for most indoor applications) Dimmable: Check specifications (may vary by model) Standard Bezel: White Optional Bezels: Chrome, brushed nickel, black, brass, anthracite Installation: Two-part first fix connector with testing terminals SKU: JC1101-ANTH Fire-Rated Construction Explained Fire-rated downlights are essential for maintaining ceiling integrity in the event of a fire. This downlight features: Intumescent Protection: Expands when exposed to heat to seal the ceiling aperture Building Regulations Compliance: Meets UK fire safety requirements Ceiling Integrity: Prevents fire and smoke spread between floors Insurance Compliance: Satisfies insurance requirements for fire safety Fire-rated downlights are mandatory in many applications, particularly in multi-storey buildings, new builds, and renovations where building control approval is required. Installation Features Two-Part First Fix Connector: Simplifies installation by allowing the first fix wiring to be completed independently of the downlight fitting. The electrician can wire the connector, test the circuit, and install the downlight later without disturbing the wiring. Dedicated Testing Terminals: Built-in testing points allow easy commissioning and fault-finding without disconnecting wiring. Double Hinged Terminal: Provides excellent access to terminal blocks, making wiring connections easier and more secure. Bezel Finish Options Choose from six premium finishes to complement your interior design: White (WH): Included as standard – classic, versatile finish Chrome (CH): Available from stock – polished, contemporary look Brushed Nickel (BN): 2-5 days delivery – subtle, sophisticated finish Black (BLK): 2-5 days delivery – bold, modern statement Brass (BR): 2-5 days delivery – warm, luxurious metallic Anthracite (ANTH): 2-5 days delivery – dark grey, industrial aesthetic Bezels are interchangeable, allowing you to update the appearance without replacing the entire fitting. Applications & Use Cases Residential: Living rooms, kitchens, bedrooms, bathrooms, hallways Commercial: Offices, retail spaces, showrooms Hospitality: Hotels, restaurants, bars, cafes New Builds: Developments requiring fire-rated lighting Renovations: Refurbishment projects with building control requirements Multi-Tenancy: Buildings where lighting preferences vary between occupants Ceiling Compatibility This downlight has been tested and approved for use with: Solid Ceilings: Traditional plasterboard on timber joists I-Joist Ceilings: Engineered timber I-beam construction Steel Open Web Joist Ceilings: Metal framework systems PVC Clad Ceilings: Plastic-finished ceiling systems This universal compatibility eliminates concerns about ceiling type and ensures reliable fire-rated performance across all common ceiling constructions. Why Choose Switchable Downlights? Switchable wattage and colour temperature offer significant advantages: Future-Proofing: Adapt lighting to changing needs without replacing fittings Reduced Stock: Electricians and contractors need only one product type Flexibility: Adjust settings room-by-room to suit different purposes Cost Savings: No need to purchase multiple product variants Easy Adjustment: Change settings from beneath ceiling – no removal required Tenant Preferences: Ideal for rental properties where occupants have different preferences Installation Guide Cut Ceiling Aperture: Create hole to specified cut-out diameter Install First Fix Connector: Wire the two-part connector to mains supply Test Circuit: Use dedicated testing terminals to verify installation Select Settings: Adjust wattage and colour temperature switches as required Install Downlight: Connect to first fix connector and secure in ceiling Fit Bezel: Attach chosen bezel finish Final Test: Verify operation and settings Note: Professional installation by a qualified electrician is recommended to ensure compliance with building regulations and electrical safety standards. Energy Efficiency LED downlights offer exceptional energy efficiency compared to traditional halogen downlights: 3.5W LED replaces 35W halogen (90% energy saving) 5W LED replaces 50W halogen (90% energy saving) Long lifespan reduces replacement frequency and maintenance costs Low heat output improves comfort and reduces cooling costs Building Regulations Compliance This fire-rated downlight helps ensure compliance with: Building Regulations Part B (Fire Safety) Building Regulations Part L (Conservation of Fuel and Power) Fire safety requirements for new builds and renovations Insurance requirements for fire-rated ceiling integrity Perfect for: Electricians, contractors, property developers, architects, homeowners, landlords, and anyone requiring flexible, fire-rated LED downlighting with switchable wattage and colour temperature for residential or commercial applications.

Read more less

⚠️ Clearance Stock — New Old Stock: This is a discontinued line. Boxes may show minor wear but all units are fully tested before dispatch and guaranteed in perfect working condition. While stocks last. Bring clean, contemporary illumination to your bathroom with the JCC LED3 Fire Rated Downlight in brushed nickel. Engineered for safety and efficiency, this IP65-rated fitting is fully approved for bathroom Zone 1 installations — delivering crisp 4000K cool white light through a precision 38° beam, all from just 4.9W. The slim brushed nickel bezel adds a refined, understated finish that complements both modern and transitional bathroom schemes. Key Features 🔥 Fire rated — LED3 fire rating for ceiling integrity compliance 💧 IP65 rated — suitable for bathroom Zone 1 (above the bath/shower) 💡 4000K cool white — crisp, clean light ideal for bathroom tasks 🎯 38° beam angle — focused, glare-controlled illumination ⚡ Energy efficient — just 4.9W power consumption 🔩 Spring clip fixing — quick, tool-free installation 🛡️ Class I earthed — enhanced electrical safety Non-dimmable Technical Specification Model JC94199BN Finish Brushed Nickel Colour Temperature 4000K Cool White Beam Angle 38° Power 4.9W Input Voltage 220–240V AC, 50Hz Output Supply 9–10.5V CC Running Current 320mA ±5% IP Rating IP65 Dimmable No Electrical Class Class I (Earthed) EMC Compliance EN55015 Luminaire Weight 0.3kg (inc. driver) Minimum Void 75mm Cut-Out (30min ceiling) Ø 71–73mm (12.5mm thick) Cut-Out (60–90min ceiling) Ø 80mm (30mm thick) Fixing Method Spring clip (included) Country of Origin United Kingdom Barcode (EAN) 5052544033407 SKU AC47037 Frequently Asked Questions Is this fitting suitable for use directly above a shower or bath? Yes. The IP65 rating makes this downlight suitable for bathroom Zone 1 — directly above the bath or shower enclosure — as well as Zone 2 and general bathroom areas. What size hole do I need to cut? For standard 12.5mm plasterboard (30-minute fire-rated ceilings), cut a Ø 71–73mm hole. For 30mm thick ceilings (60–90 minute fire rating), cut Ø 80mm. Minimum ceiling void required is 75mm. Is this downlight dimmable? No — this fitting is non-dimmable. Please ensure your circuit does not use a dimmer switch. Does it require an earth connection? Yes. This is a Class I fitting and must be connected to an earth (ground) wire. It should be installed by a qualified electrician. What is the condition of clearance stock? This is new old stock from a discontinued JCC range. The downlights themselves are brand new and fully tested — only the outer packaging may show minor cosmetic wear from storage.

Read more less