Adhesives, Silicones & Seals

Create a coordinated finish around your bathroom wall panels with Nuance BB Complete Colour-Matched Sealant. The 290ml cartridge is available in ten colours, helping joints blend with your chosen panel finish rather than stand out in contrasting white or clear. Suitable for the Nuance, Wetwall, Bushboard and Wilsonart panel ranges identified in this listing, it is a practical finishing product for your bathroom installation.Key Features Colour-coordinated finish: Ten options to complement your wall panels. Panel installation accessory: For sealing joints as directed by the relevant panel installation guidance. 290ml cartridge: For use with a compatible cartridge sealant gun. Coordinated installation: Pair with BB Complete panel adhesive where specified for your panel system. Available ColoursAsh Grey, Chocolate, Fudge, Ice White, Jet Black, Mushroom, Pewter Grey, Silver Grey, Slate Grey and Vanilla.Technical Specification Brand: Nuance Range: BB Complete Product type: Colour-matched wall panel sealant Cartridge volume: 290ml Colour options: 10 Associated panel ranges: Nuance, Wetwall, Bushboard and Wilsonart Application: Bathroom wall panel joints, subject to the panel manufacturer's installation instructions Frequently Asked QuestionsWhich colour should I choose?Use the recommended sealant colour for your particular panel decor. A colour name alone does not guarantee an exact match. If you need help, email customerservice@bubblegumbathrooms.co.uk with your panel brand and finish before ordering.Can I use it with Nuance, Wetwall, Bushboard or Wilsonart panels?This BB Complete sealant is listed for these panel ranges. Check the installation instructions for your specific panel system to confirm the required sealant and colour.How much sealant do I need?The quantity depends on the length, width and depth of the joints and the requirements of your panel installation. Follow the panel manufacturer's guidance rather than assuming one cartridge will cover a complete enclosure.Is this a substitute for panel adhesive?Choose the product specified for each installation step. Where BB Complete panel adhesive is required for fixing panels, use the dedicated adhesive rather than substituting this sealant.Can I order if the item shows as out of stock?Yes, orders are accepted when stock is unavailable. Contact customerservice@bubblegumbathrooms.co.uk or call 01603 381095 to confirm availability and lead time.Delivery InformationThis is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.Complete the Nuance Collection Nuance BB Complete Panel Adhesive 290ml Nuance Wall Panel Set A3, corner up to 1200mm × 1200mm Nuance Wall Panel Set B3, corner up to 1200mm × 1800mm Nuance Wall Panel Set D3, recess up to 1200mm × 1200mm × 1200mm Nuance Designer White Single Niche

Read more less

Get the seal right first time. This professional-grade waterproof sealant is engineered specifically for Fibo wall panels — ensuring a complete moisture barrier at every joint, edge, and corner. Using genuine Fibo Sealant is a requirement for maintaining your Fibo panel warranty, making it an essential companion to any Fibo installation. Available in Black, Grey (400591), and White (400590) to match your panel colour scheme. Key Features Fibo warranty compliance — genuine Fibo Sealant is required to keep your panel warranty valid Complete waterproof protection — creates a reliable moisture barrier at joints, edges, and corners Generous coverage — one 290ml tube covers up to 3 panel packs Three colour options — Black, Grey (400591), and White (400590) for a seamless finish Standard cartridge format — fits all sealant guns for easy, mess-free application Formulated for wet areas — designed specifically for bathrooms and wet rooms Technical Specification Brand: Fibo Type: Waterproof bathroom panel sealant Volume: 290ml cartridge Colour options: Black / Grey (400591) / White (400590) Coverage: Up to 3 Fibo panel packs per tube Application: Fibo wall panels, bathroom joints, wet room edges Format: Standard cartridge (fits all sealant guns) Country of Origin: Norway (NO) HS Code: 3214.10 SKU (Black): DIWW0394 SKU (Grey 400591): DIWW0396 SKU (White 400590): DIWW0398 Barcode (Black): 5054913550904 Barcode (Grey): 5054913550911 Barcode (White): 5054913550928 What's Included 1 × 290ml Fibo waterproof sealant cartridge (colour as selected) Requires a standard sealant gun for application. Complete the Fibo Collection Fibo Bathroom Wall Panels & Accessories — browse the full Fibo bathroom range Fibo Kitchen Wall Panels & Splashbacks — Fibo kitchen range All Fibo Products — wall boards, splashbacks & accessories Fibo Small L-Shaped Profile 2.4m — wall panel trim in Black or Aluminium Fibo 2-Part Internal Corner Profile 2.4m — internal corner trim Fibo Internal Corner Profile 2.4m — Aluminium, Polished Chrome or White PVC Fibo Rounded External Corner Profile 2.4m — external corner trim Fibo Base Profile 2.4m — waterproof wall panel base trim Fibo J-Shaped End Cap Profile 2.4m — wall panel edge trim Fibo Internal Hidden Corner Profile 2360mm — seamless aluminium trim Frequently Asked Questions Is this sealant required for the Fibo warranty? Yes — using genuine Fibo Sealant is a requirement for maintaining your Fibo panel warranty. Using alternative sealants may void the warranty. How much sealant do I need? One 290ml tube covers up to 3 Fibo panel packs. Calculate based on the number of panel packs in your installation and order accordingly. Which colour should I choose? Select the colour that most closely matches your Fibo panel finish: Black, Grey (400591), or White (400590). The colour codes correspond to Fibo's own colour references. Do I need a sealant gun? Yes — a standard sealant gun is required to apply the sealant from the 290ml cartridge. Can I order if the item shows as out of stock? Yes — this product is available to order even when stock shows as zero. Please allow additional lead time and contact us on 01603 381095 to confirm availability.

Read more less

Wetwall Complete Adhesive & Sealant Wetwall Complete is the professional-grade installation essential for Wetwall Elite, Mermaid, and Alloy panel ranges. Using Wetwall Complete Sealant is mandatory to maintain the panel manufacturer’s warranty — proof of purchase required. The 100% waterproof formula has no shrinkage and remains flexible when cured, ensuring a long-lasting, watertight seal at every joint and edge. Available in 16 variants: Adhesive, Clear Silicone, White Silicone, and 13 colour-matched sealants formulated to coordinate with Elite panel finishes. 🚚 Delivery Information Free delivery on all Wetwall orders over £200. As individual sealant and adhesive cartridges are priced under £200, a £50 delivery surcharge will be invoiced and payable before delivery. To avoid this charge, add Wetwall panels or other accessories to your order to reach the £200 free delivery threshold — or contact us on 01603 381095 to discuss your order. Which Variant Do You Need? Adhesive — bonds panels to wall surfaces. Apply to the back of panels before installation. Essential for all panel installations. Clear Silicone — invisible finish, suitable for any panel colour. White Silicone — white finish, ideal for white or light-coloured panels. Colour-matched sealants — Ash Grey, Basalt Grey, Chocolate, Fudge, Ice White, Ivory, Jet Black, Mushroom, Oatmeal, Pewter Grey, Silver Grey, Slate Grey, Vanilla. Select the colour matching your Elite panel finish for a seamless, professional result. Key Features Mandatory for warranty validity — must be used with Elite, Mermaid, and Alloy panels; proof of purchase required 100% waterproof — complete protection against moisture penetration at joints and edges No shrinkage — maintains seal integrity over time; no gaps forming Flexible when cured — accommodates building movement and thermal expansion without cracking Mould-resistant — prevents mould and mildew growth in sealed areas 16 variants — adhesive, clear, white, and 13 colour-matched sealant options Technical Specification Brand: Wetwall by Bushboard Product: Complete Adhesive & Sealant Volume: 290ml cartridge Formula: 100% waterproof, no shrinkage, flexible when cured, mould-resistant Coverage (sealant): Approx. 10–15 linear metres per cartridge (depending on joint width) Compatible with: Wetwall Elite, Mermaid, and Alloy panel ranges Warranty requirement: Mandatory for panel guarantee validity Country of Origin: GB HS Code: 3214.10 What’s Included 1 × 290ml Wetwall Complete cartridge (adhesive or sealant, as selected) Requires a standard sealant gun for application. Compatible Panel Ranges Wetwall Elite Marble Collection — 18 marble-effect designs, trim-free Wetwall Elite Stone & Concrete Collection — 14 stone and concrete-effect designs, trim-free Wetwall Elite Wood & Decor Collection — 6 wood and decor designs, trim-free Mermaid Collection Wall Panels — Group 1 — 5 designs, laminate-faced plywood Mermaid Collection Wall Panels — Group 2 — 12 designs, plywood core Mermaid Collection Wall Panels — Group 3 — 13 designs, premium plywood Wetwall Alloy Decor Collection — 25+ designs Wetwall Alloy Solid Colour Collection — 10 solid colours Also Consider Wetwall Adhesive & Sealant — white adhesive, clear & white silicone for standard Wetwall panels Wetwall Alloy Trims — edge profiles & corner seals for Alloy Collection Wetwall Mermaid Trims — edge profiles & corner seals for Mermaid Collection Wetwall Tile Trims — edge profiles & corner seals for Tile Collection Frequently Asked Questions Is this sealant mandatory for the warranty? Yes — Wetwall Complete Sealant must be used when installing Elite, Mermaid, and Alloy panels for the manufacturer’s warranty to remain valid. Proof of purchase is required. Using alternative sealants will void the panel warranty. How do I choose the right colour? Select the colour that matches your Elite panel finish. The sealant colours are specifically formulated to coordinate with the Wetwall Elite range. If your panel is white or light-coloured, White Silicone is a good alternative. For any colour, Clear Silicone provides an invisible finish. What is the difference between the Adhesive and the Sealant? The Adhesive variant is used to bond panels to the wall surface during installation — it is applied to the back of the panel before fixing. The Sealant variants (clear, white, or colour-matched) are used to seal joints between panels and at edges to create a watertight finish. Most installations require both. How much sealant do I need? One 290ml cartridge covers approximately 10–15 linear metres depending on joint width. Measure the total length of all joints requiring sealing and order accordingly — always order a little extra for wastage. What is the difference between this and the standard Wetwall Adhesive & Sealant? The standard Wetwall Adhesive & Sealant is suitable for standard Wetwall panel ranges. The Wetwall Complete range is specifically required for Wetwall Elite, Mermaid, and Alloy panels — using the wrong product may void your panel warranty. Do I need a sealant gun? Yes — a standard sealant gun is required to apply the cartridge. These are widely available from DIY and trade suppliers. What is the delivery charge? Free delivery applies to all Wetwall orders over £200. As individual cartridges are priced under £200, a £50 delivery surcharge will be invoiced and payable before delivery. To avoid this, combine your sealant order with Wetwall panels or other accessories to reach the £200 threshold. Can I order if the item shows as out of stock? Yes — we can accept orders even when stock shows as unavailable. Please contact us at customerservice@bubblegumbathrooms.co.uk or call 01603 381095 to confirm availability and lead time before ordering.

Read more less

Stop leaks before they start with the Euroshowers Self-Adhesive Shower Seal Tape. A simple, effective solution for creating a watertight seal around baths, shower trays, and sinks. At 320cm long and 38mm wide, a single roll provides enough tape to seal a full shower enclosure or bath surround. Simply peel and press for an instant, professional-looking seal — no tools or silicone gun required. Available in White (SKU 17810) and Grey (SKU 17850). Key Features Peel-and-Stick Application — no tools or silicone gun required Watertight Seal — for baths, shower trays, and sinks 320cm Length — sufficient for a full shower enclosure or bath surround 38mm Width — reliable coverage at wall-to-tray or wall-to-bath junctions Two Colour Options — White (SKU 17810) and Grey (SKU 17850) Flexible and Easy to Trim — cut to length with scissors or a craft knife Technical Specification Brand: Euroshowers SKU / MPN (White): 17810 | Barcode: 5029067178106 SKU / MPN (Grey): 17850 | Barcode: 5029067178502 Length: 320cm per roll Width: 38mm Application: Self-adhesive (peel and stick) Suitable For: Baths, shower trays, sinks Colours: White, Grey Country of Origin: China Condition: New Frequently Asked Questions What surfaces can this seal tape be applied to? This tape is suitable for sealing the junction between walls and baths, shower trays, or sinks. Ensure the surface is clean, dry, and grease-free before application for the best adhesion. Can it be used in a wet room? This tape is designed for use at bath and shower tray junctions. For full wet room waterproofing, we recommend using a dedicated tanking system. Contact us at customerservice@bubblegumbathrooms.co.uk or call 01603 381095 if you need advice. Can I trim the tape to length? Yes — the tape can be cut to any length with scissors or a craft knife. Can I order if the item shows as out of stock? Yes — we can fulfil this product even when stock shows as zero. Place your order as normal and we'll confirm lead time with you. For urgent enquiries, contact us at customerservice@bubblegumbathrooms.co.uk or call 01603 381095. Complete the Euroshowers Collection Euroshowers Shower Squeegee & Scraper — Chrome & Matt Black | 25cm Silicone Blade Euroshowers Chrome Wire Shower Basket — Rectangle | Single, Double or Triple | Stainless Steel Browse All Euroshowers Bathroom Accessories Browse All Adhesives & Silicones Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.

Read more less

Finish your DuraPanel installation with neat, colour-coordinated joints using this 2-in-1 sealant and adhesive. Designed to bond and seal in one application, it creates a flexible, waterproof finish around panel joins, trims, corners and edges, helping the finishing details blend with your chosen panels. Key Features Bonds and seals: dual-purpose sealant and adhesive for DuraPanel installations. Colour-coordinated finish: choose from White, Beige, Grey (Light Grey), Anthracite or Stone Grey. Flexible, waterproof bond: suitable for finishing joints and trims. Versatile finishing: use around panel joins, corners and edges in accordance with the installation instructions. UK manufactured: made in the United Kingdom. Technical Specification Brand: DuraPanel Product type: 2-in-1 sealant and adhesive Application: bonding and sealing DuraPanel panels, trims, corners and joins Colours: White, Beige, Grey (Light Grey), Anthracite and Stone Grey Joint properties: flexible and waterproof Manufacture: United Kingdom Frequently Asked Questions Is this a sealant or an adhesive? It combines both functions, allowing you to bond and seal in one application when used as directed for your DuraPanel installation. Which colour should I choose? Choose the sealant colour recommended for your panel finish. Grey (Light Grey) and Stone Grey are separate options. If you need help selecting a match, contact customerservice@bubblegumbathrooms.co.uk or call 01603 381095 before ordering. Where can it be used? It is intended for finishing DuraPanel panel joins, trims, corners and edges. Follow the installation instructions for preparation, application and curing before exposing the joint to water. Can I order if the item shows as out of stock? Yes, this item can be ordered when out of stock. Contact us if you need to confirm availability or a delivery timescale before ordering. Is delivery free? Free delivery is available on DuraPanel orders over £200. For orders of £200 or less, any applicable delivery charge is shown at checkout. Complete the DuraPanel Collection Pair your sealant with the appropriate panels and finishing accessories for a coordinated installation. Browse DuraPanel trims and finishing accessories Explore DuraPanel 7000 Series wall panels Explore the DuraPanel 5000 Plywood range  Explore the DuraPanel 3000 PVC range  View the complete DuraPanel collection

Read more less

Give your Fibo wall panels a firm foundation with this 290ml panel adhesive. Designed for Fibo wall board installations, it creates a durable bond for bathroom and kitchen projects, helping you achieve a neatly finished panelled space. Each cartridge covers approximately three panels, making it straightforward to plan your installation supplies.Key Features Fibo panel adhesive: Designed for use with Fibo wall board systems. Durable bonding: Highly cohesive adhesive helps secure panels in place. 290ml cartridge: Applied using an adhesive or sealant gun. Approximate coverage: One cartridge covers around three panels, equivalent to 1.5 two-panel packs. Installation flexibility: Can be used with mechanical fixings where specified by the installation instructions. Bathroom and kitchen projects: Suitable for Fibo wall board installations in these spaces. Technical Specification Brand: Fibo Product type: Wall panel installation adhesive Cartridge volume: 290ml Approximate coverage: Three panels per cartridge Application: Fibo bathroom and kitchen wall board systems Application tool: Adhesive or sealant gun, not included SKU: DIWW0390 Barcode: 5054913550881 What's Included1 × Fibo panel adhesive 290ml cartridgeFrequently Asked QuestionsHow much adhesive do I need?Allow approximately one 290ml cartridge for every three panels. Coverage is a guide and can vary with the substrate and application method. Follow the current Fibo installation instructions for your panel system.Do I need an adhesive gun?Yes. An adhesive or sealant gun suitable for the cartridge is required and is not included.Can I use this alongside mechanical fixings?Yes, where required by the Fibo installation instructions. Follow the guidance for your substrate and panel system rather than relying on adhesive alone in every situation.Is panel adhesive the same as waterproof sealant?No. This product bonds panels in place. Use the specified Fibo sealant for joints and sealing details as directed in the installation instructions.What should I check before installation?Check the current Fibo installation and warranty requirements before starting. Use the specified installation products, prepare the substrate as directed and follow the instructions for fixing and sealing your panels.Can I order if the item shows as out of stock?Yes. This product can be ordered when stock shows as zero. For availability and expected lead times, email customerservice@bubblegumbathrooms.co.uk or call 01603 381095.Delivery InformationThis is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.Complete the Fibo Collection Fibo Waterproof Sealant 290ml for sealing your panel installation, available in Black, Grey and White. Fibo Installation Wipes, 35 Pack for sealant and profile cleaning. Fibo Click Wax for Aqua Lock panel installation.

Read more less

Create a discreet waterproof barrier where your bath, shower tray or worktop meets the wall with the Spajet Flexi-Seal 4m Waterproofing Strip. Its flexible rubber construction accommodates movement, while the integrated butyl-based adhesive bonds to the edge before tiles or wall panels conceal the upstand. The pre-cut 4m length gives you room to work around longer wall junctions, provided you check the total required length before ordering.Key Features 4m pre-cut length: cut to suit the wall-contact edges of your installation. Flexible rubber: accommodates building movement and settlement. Integrated butyl adhesive: adhesive backing for attachment to the bath, tray or worktop edge. Concealed finish: the upstand sits behind tiles or wall panels. Versatile application: suitable for bath, shower tray and worktop wall junctions. Technical Specification Brand: Spajet Range: Flexi-Seal Product type: Bath and shower tray waterproofing strip Length: 4 metres, pre-cut Material: Flexible rubber Adhesive: Integrated butyl-based adhesive Installation: Concealed behind tiles or wall panels SKU: FLEXI14 EAN: 5060134754946 Choosing the Right LengthMeasure every edge that meets a wall, add those lengths together and allow for any corners or overlaps required by the installation instructions. The strip must cover the complete junction: do not shorten the protected area to make an insufficient length fit. 1700 × 700mm bath, one long edge and two short ends: 1700 + 700 + 700 = 3100mm before fitting allowances. 1700 × 700mm bath, two long edges and one short end: 1700 + 1700 + 700 = 4100mm before fitting allowances. A single 4m strip is not enough. 1200 × 800mm tray, one 1200mm edge and two 800mm edges: 2800mm before fitting allowances. 900 × 900mm tray, three edges: 2700mm before fitting allowances. For shaped baths, measure the actual wall-contact edges rather than relying on the bath's overall dimensions.Installation GuidanceFollow the supplied manufacturer's fitting instructions. Prepare clean, dry, dust-free contact surfaces, position the adhesive strip along the required edges and fit the upstand behind the wall finish. Check the specified sealant, corner treatment and overlap requirements before starting. This is a concealed installation component, not a decorative strip to cover an existing silicone joint.Frequently Asked QuestionsWill one 4m strip cover my bath or shower tray?It depends on which edges meet the wall. Add the lengths of those edges and the manufacturer's fitting allowances. If the total exceeds 4m, choose a longer sealing solution; do not leave part of the junction unprotected.Can I use it with a P-shaped or L-shaped bath?Measure the actual wall-contact edges and check the fitting requirements for your bath. A shaped bath is not automatically covered by a 4m strip.How does it differ from the 2m Flexi-Seal strip?The pre-cut length is the main difference. Choose the length that covers your full installation, including any fitting allowances.Can I fit it after tiling?The upstand is designed to be concealed behind tiles or wall panels, so plan its installation before completing the wall finish. Follow the manufacturer's fitting sequence.Can I order if the item shows as out of stock?Yes, this item can be ordered when stock shows as zero. Contact us on 01603 381095 or at customerservice@bubblegumbathrooms.co.uk to confirm availability and lead time.Delivery InformationThis is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.Complete the Flexi-Seal CollectionNeed a shorter length? View the Flexi-Seal 2m Waterproofing Strip and measure your installation before choosing.

Read more less

Protect the junction between your shower tray, bath or bathroom worktop and the wall with the Flexi-Seal 2m Waterproofing Strip. Its flexible rubber construction and integrated butyl adhesive create a concealed waterproof barrier beneath tiles or wall panels, helping protect vulnerable edges while accommodating movement.The pre-cut 2m length suits shorter sealing runs. Measure every edge you need to seal, allowing for corners and trimming, before choosing your strip length.Key Features 2m pre-cut strip: convenient for compact installations and shorter wall junctions. Flexible rubber: accommodates movement at the junction between the fixture and wall. Integrated butyl adhesive: bonds the strip to the bath, shower tray or worktop edge. Concealed waterproofing: the upstand sits behind tiles or wall panels for a neat finished installation. Versatile application: suitable for shower trays, baths and bathroom worktops. Technical Specification Brand: Spajet Range: Flexi-Seal Product code: FLEXI2 Length: 2 metres, pre-cut Material: Flexible rubber Adhesive: Integrated butyl-based adhesive Installation: Concealed beneath tiles or wall panels Applications: Shower trays, baths and bathroom worktops Installation GuidancePrepare clean, dry, dust-free surfaces and follow the manufacturer's fitting instructions. Apply the adhesive-backed strip to the fixture edge and position the upstand behind the wall finish. Complete the installation and final sealing in accordance with the manufacturer's guidance. This strip forms part of the waterproofing installation, rather than replacing correct fitting and finishing.Frequently Asked QuestionsWill 2m cover my shower tray or bath?Measure the total length of the wall-facing edges that require sealing and allow for corners and trimming. Two 800mm edges total 1.6m before allowances; installations with longer or additional edges may need a longer strip.Where does the strip fit?The adhesive bonds to the shower tray, bath or worktop edge, with the flexible upstand concealed behind the tiles or wall panels.Can I use it on a bathroom worktop?Yes, the strip can be used at bathroom worktop-to-wall junctions as well as around baths and shower trays. Follow the manufacturer's instructions for your installation.Can I order if the item shows as out of stock?Yes, this product can be ordered when stock shows as zero. Please allow additional lead time and contact us on 01603 381095 or email customerservice@bubblegumbathrooms.co.uk to confirm availability.Delivery InformationThis is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.Complete the Flexi-Seal CollectionNeed a longer sealing run? Choose the Flexi-Seal 4m Waterproofing Strip for installations requiring more coverage. Check your total sealing length before ordering.

Read more less

Protect the concealed joint around your shower tray or bath with the Classi Seal 3.2m Self-Adhesive Waterproofing Strip. Installed before tiling, this flexible strip creates a secondary waterproof barrier at the wall-facing edges, helping protect the area behind the finished joint. The pre-cut length is convenient for a single installation where the measured edges fit within 3.2 metres. Key Features 3.2m pre-cut length: trim to suit the wall-facing edges of your installation. Self-adhesive backing: attaches to prepared shower tray or bath edges. Flexible secondary seal: provides an additional barrier behind the finished tiled joint. Movement accommodation: up to 15mm, helping the seal accommodate movement at the joint. Suitable for shower trays and baths: designed for installation before tiling. No adhesive curing wait: tiling can follow application and positioning, in accordance with the installation instructions. Technical Specification Brand: Classi Product: Classi Seal waterproofing strip Product code: CS032 EAN: 5060062840094 Length: 3.2 metres Format: pre-cut, self-adhesive flexible waterproofing strip Movement accommodation: up to 15mm Application: wall-facing shower tray and bath edges, before tiling Pack contents: one 3.2m waterproofing strip Measure Before Ordering Add together the lengths of every edge that needs sealing and allow for the fitting requirements in the manufacturer's instructions. 3.2m does not automatically cover three sides of every bath or shower tray. For example, two 900mm edges and one 800mm edge total 2.6m before fitting allowance, whereas two 1700mm edges and one 700mm edge total 4.1m. Choose your strip length from your actual measurements, not the number of sides alone. Installation Guidance Prepare clean, dry, dust-free surfaces and apply the strip to the wall-facing edges before positioning the tray or bath and tiling. Follow the supplied Classi fitting instructions for surface preparation, corner detailing and the final sealant joint. This strip provides a secondary barrier; it does not replace the finished joint seal or the rest of the installation's waterproofing requirements. Frequently Asked Questions Will 3.2m cover my bath or shower tray?Measure all edges requiring sealing and add the fitting allowance specified in the instructions. Coverage depends on the dimensions and layout. A 3.2m strip will not cover every three-sided installation. Does this replace silicone sealant?No. Classi Seal provides a secondary waterproof barrier behind the finished joint. Complete the installation with the joint sealant and waterproofing details specified in the manufacturer's instructions. Can I tile immediately after fitting the strip?The self-adhesive strip does not require an adhesive curing wait. Once fitted and the tray or bath is positioned, follow the manufacturer's instructions for tiling and final sealing. What is the difference between this and the per-metre option?CS032 is supplied as one pre-cut 3.2m length. The Classi Seal per-metre option, CS025, is sold by the metre for installations requiring a different length. Can I order if the item shows as out of stock?Yes, this non-clearance item can be ordered when stock shows as zero. Contact us to confirm availability and lead time if your installation is urgent: customerservice@bubblegumbathrooms.co.uk or 01603 381095. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge. Complete the Classi Seal Collection Need a different length? View the Classi Seal Waterproofing Strip Sold Per Metre and measure your installation before choosing the quantity required.

Read more less

The Classi Seal Waterproofing Strip (SKU: CS025) is a professional self-adhesive tanking strip designed to create a reliable secondary waterproof seal between shower trays or baths and bathroom walls. Applied before installation, it creates a flexible membrane behind the tiles that accommodates up to 15mm of building movement — providing far superior long-term protection compared to silicone sealant alone. Sold per metre, cut fresh from a 25m roll, so you order exactly what you need with no waste. 📏 Sold per metre — enter the quantity in metres at checkout.For example, quantity 3 = 3 metres, quantity 5 = 5 metres. How much do you need? Standard shower tray or bath (3 sides): approx. 3–3.5m · Large enclosure: 4–5m · Add 10% for trimming. For a standard pre-cut length, see the Classi Seal 3.2m Pre-Cut Strip (CS032). Key Features Sold Per Metre — cut to your exact length from a 25m roll; no waste, no offcuts Self-Adhesive Backing — pressure-sensitive; quick, clean installation 15mm Movement Accommodation — flexes with building settlement without compromising the seal Tile Immediately — no curing time required after application Superior to Silicone Alone — creates a waterproof membrane behind the tiles Flexible Strip — conforms to shower tray and bath edges Technical Specification Brand: Classi SKU: CS025 Type: Self-adhesive flexible waterproofing tanking strip Sold: Per metre (cut from 25m roll) Width: 100–120mm (upstand + base) Weight: 0.15kg per metre Movement Accommodation: Up to 15mm Adhesive: Pressure-sensitive self-adhesive backing Material: Flexible waterproof membrane Application Temperature: 5°C to 35°C Suitable Surfaces: Clean, dry, dust-free Maximum Roll Length: 25 metres How It Works Prepare: Ensure tray or bath edges are clean, dry, and dust-free Apply: Remove backing and press Classi Seal firmly to the wall-facing edges of the tray or bath Position: Install the tray or bath — the upstand extends up the wall Tile: Apply tiles over the upstand immediately — no curing wait Seal: Apply neutral cure silicone to the bottom edge once tiling is complete Also Available Classi Seal 3.2m Pre-Cut Strip (CS032) — ready-to-use pre-cut length for a standard shower tray or bath on 3 sides Flexi-Seal 2.0m Waterproofing Strip — alternative; shorter pre-cut length for smaller installations Flexi-Seal 4.0m Waterproofing Strip — alternative; longer pre-cut length for larger baths and shower trays Shower Trays — browse compatible flat and low profile trays Browse All Waterproofing & Tanking Products Frequently Asked Questions How do I order the right length?Enter the number of metres you need as the quantity at checkout. We cut your exact length fresh from a 25m roll. As a guide: a standard shower tray or bath on 3 sides requires approximately 3–3.5 metres. Add 10% for trimming. If in doubt, order slightly more — offcuts can be used for future repairs or smaller projects. Why use a tanking strip instead of silicone alone?Silicone sealant is the first line of defence but has limitations — building movement, settlement, and thermal expansion can cause silicone to crack or separate over time. Classi Seal provides a critical secondary barrier: a flexible waterproof membrane behind the tiles that accommodates up to 15mm of movement without failing. Even if the silicone joint cracks, the tanking strip prevents water from reaching the substrate. This dual-layer approach is considered best practice by professional bathroom installers. Can I tile immediately after applying Classi Seal?Yes — no curing time is required. Once the strip is applied and the tray or bath is positioned, you can tile over the upstand immediately. The base edge should be sealed with neutral cure silicone once tiling is complete. What type of silicone should I use?Always use neutral cure silicone (not acetic/vinegar cure). Acetic cure silicone releases acetic acid during curing which can damage the adhesive and membrane. Neutral cure silicone is widely available and is the correct choice for use with tanking strips and most bathroom materials. Is there a pre-cut version available?Yes — the Classi Seal 3.2m Pre-Cut Strip (CS032) is ideal for a single standard shower tray or bath installation with no measuring required. The per-metre option (this product) is best when you need a specific custom length, are completing multiple bathrooms, or want to avoid waste. Can I order if the item shows as out of stock?Yes — we can fulfil this product even when stock shows as zero. Place your order as normal and we’ll confirm lead time with you. For urgent enquiries, call us on 01603 381095. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.

Read more less

MX Flexi Seal Strip — 2.8m — Waterproof Upstand for Flat Shower Trays The MX Flexi Seal Strip creates a professional waterproof upstand around the perimeter of a flat shower tray, allowing tiles to be fitted directly over it for a seamless, watertight finish. Applied to the tray before installation, the flexible strip accommodates natural building movement and settlement whilst maintaining a permanent seal at the vulnerable tray-to-wall junction. The 2.8m length and 70mm width provide complete coverage for a standard shower tray installation. Engineered by MX for professional-grade waterproofing performance. ⚠️ For flat shower trays only. This strip is designed for use with flat (zero-upstand) shower trays where a tiled upstand is required. It is not suitable for trays with a pre-formed upstand. Apply to the tray perimeter before positioning the tray. Key Features 2.8m length × 70mm width — sufficient for complete perimeter coverage of a standard shower tray Flexible construction — accommodates building movement and settlement without cracking the seal Tile-over design — tiles are fitted directly over the upstand for a seamless finish Waterproof upstand — prevents water ingress at the tray-to-wall junction Professional-grade performance — engineered by MX for reliable, long-lasting waterproofing Suitable for professional fitters and competent DIY Technical Specification Brand: MX SKU: WAY EAN: 5017706771252 Type: Flexible waterproofing upstand strip Length: 2.8 metres Width: 70mm Weight: 1kg Application: Flat shower trays — applied to tray perimeter before installation Compatible with: Flat (zero-upstand) shower trays Installation: Apply strip to tray perimeter; tile over upstand once tray is positioned How It Works The Flexi Seal Strip is applied around the perimeter of the flat shower tray before the tray is positioned. Once the tray is in place, the 70mm wide flexible upstand extends above the tray surface. Tiles are then fitted over the upstand, creating a continuous waterproof barrier between the tray and the tiled wall. The flexible material allows for natural building movement without compromising the seal. Suitable For Flat shower tray installations requiring a tiled upstand Standard shower enclosures — 2.8m covers a full perimeter Walk-in shower installations Wet room shower areas with flat trays New builds and bathroom renovations Commercial bathroom projects Coordinate Your Shower Installation Shower Trays — browse compatible flat shower trays Shower Enclosures — complete your shower installation Shower Valves & Accessories — valves, heads, and arms Frequently Asked Questions What is a Flexi Seal Strip used for? A Flexi Seal Strip creates a waterproof upstand around the perimeter of a flat shower tray. Flat trays have no pre-formed upstand, so without a seal strip, water can penetrate the junction between the tray and the wall. The strip is applied before the tray is installed; tiles are then fitted over it to create a seamless, watertight barrier. It is an essential component for any flat shower tray installation where a tiled finish is required. What are the dimensions of this strip? The MX Flexi Seal Strip is 2.8 metres long and 70mm wide, weighing 1kg. The 70mm width creates a generous upstand above the tray surface, providing ample coverage for tiling over. The 2.8m length is sufficient for the full perimeter of most standard shower tray installations. Is this strip suitable for all shower trays? This strip is designed for flat (zero-upstand) shower trays only. It is not required for trays with a pre-formed upstand, as those trays already have a raised edge to seal against the wall. If you are unsure whether your tray requires a seal strip, call us on 01603 381095 and we can advise. Will 2.8m cover my shower tray? The 2.8m length covers the full perimeter of most standard shower tray installations. The strip only needs to cover the sides that meet the wall — typically 3 sides for a corner installation, or 2 sides for a recess. For a 900mm corner installation: 2 sides = 1.8m; 3 sides = 2.7m, which the 2.8m strip covers with minimal waste. For larger trays or 4-sided installations, you may need more than one strip. Measure your installation before ordering to confirm. When should the strip be applied? The Flexi Seal Strip should be applied to the perimeter of the shower tray before the tray is positioned. Once the strip is in place and the tray is installed, tiles are fitted over the upstand. Follow the manufacturer’s installation instructions supplied with the product for best results. Can a competent DIYer install this? Yes — the MX Flexi Seal Strip is suitable for professional bathroom fitters and competent DIY enthusiasts. Correct application is important to ensure a watertight seal — follow the installation instructions carefully. If you are unsure, professional installation is recommended. Can I order if the item shows as out of stock? Yes — this product is available to order even when stock shows as zero. Please allow additional lead time and contact us on 01603 381095 to confirm availability.

Read more less

For small white surface blemishes, the Cramer White Touch-Up Stick gives you a controlled way to cover minor chips, scratches and scuffs around the kitchen or bathroom. Its stick applicator is designed for targeted touch-ups on compatible ceramic, enamel, acrylic, metal, powder-coated and painted finishes. Key Features White touch-up stick for minor chips, scratches and scuffs Precision stick applicator for controlled coverage Suitable for compatible ceramic, enamel, acrylic, metal, powder-coated and painted surfaces Useful for small touch-ups on bathroom and kitchen fixtures and surfaces Technical Specification Brand: Cramer Product code: CTUS SKU: K07227 Product type: White surface touch-up stick Colour: White Applicator: Stick Suitable surfaces: Ceramic, enamel, acrylic, metal, powder-coated and painted finishes Typical use: Minor chips, scratches and scuffs Frequently Asked Questions What can I use the touch-up stick on? It is intended for compatible ceramic, enamel, acrylic, metal, powder-coated and painted finishes. Check the product packaging and the surface material before applying. What kind of marks is it designed to touch up? It is intended to conceal minor chips, scratches and scuffs. It is a surface touch-up product, not a replacement for repairing broken or structurally damaged items. What colour is the stick? This is the white Cramer touch-up stick. Can I order if the item shows as out of stock? Yes, we can order this item for you if it shows as out of stock. For availability, email customerservice@bubblegumbathrooms.co.uk or call 01603 381095. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge. Complete Your Cramer Repair Kit Cramer Kitchen & Bath Repair Kit Cramer 50ml White Repair Spray Cramer Bath Rubber

Read more less

Wetwall Adhesive & Sealant Wetwall Adhesive & Sealant are the professional-grade installation essentials for fitting Wetwall bathroom wall panels. The adhesive bonds panels securely to wall surfaces; the silicone sealant creates a waterproof, mould-resistant seal at joints, edges, and where panels meet fixtures. Available in three variants — Neutral Adhesive, Clear Silicone, and White Silicone — to suit your panel colour and installation requirements. For a complete installation you will typically need both adhesive (to fix panels) and sealant (to waterproof joints). 🚚 Delivery Information Free delivery on all Wetwall orders over £200. As individual adhesive and sealant cartridges are priced under £200, a £50 delivery surcharge will be invoiced and payable before delivery. To avoid this charge, add Wetwall panels or other accessories to your order to reach the £200 free delivery threshold — or contact us on 01603 381095 to discuss your order. Which Variant Do You Need? Neutral Adhesive — bonds panels to wall surfaces. Apply to the back of panels before installation. Essential for all panel installations. Clear Silicone — seals joints between panels and around edges. Invisible finish, suitable for any panel colour. White Silicone — seals joints between panels and around edges. White finish, ideal for white or light-coloured panels. Key Features Professional-grade, bathroom-specific formula — withstands constant moisture, humidity, and temperature fluctuations Superior bonding strength — panels remain securely fixed in high-moisture environments 100% waterproof sealing — prevents water penetration at joints and edges Mould-resistant — prevents mould and mildew growth in sealed areas Flexible seal — accommodates minor movement without cracking Compatible with all standard Wetwall panel ranges — Tile Collection, Alloy, and more Technical Specification Brand: Wetwall by Bushboard Type: Adhesive and silicone sealant Variants: Neutral Adhesive / Clear Silicone / White Silicone Application: Wetwall panel installation — interior wet areas Compatibility: Standard Wetwall panel ranges (for Elite, Mermaid & Alloy panels see Wetwall Complete Adhesive & Sealant) Country of Origin: GB HS Code: 3506.10 Application Guide Adhesive: Ensure wall surface is clean, dry, and dust-free. Apply adhesive to the back of the panel in continuous beads or dots. Press panel firmly against the wall and support until set. Follow manufacturer’s instructions for drying times. Silicone Sealant: Ensure surfaces are clean and dry. Apply sealant to joints using a sealant gun. Smooth with a wet finger or sealant tool. Allow to cure fully before exposing to water. Also Consider Wetwall Complete Adhesive & Sealant — mandatory for Elite, Mermaid & Alloy panels; 16 colour-matched options including 13 colour sealants Wetwall Alloy Trims — edge profiles & corner seals for Alloy Collection Wetwall Mermaid Trims — edge profiles & corner seals for Mermaid Collection Compatible Panel Ranges Wetwall Alloy Decor Collection — 25+ decorative designs Wetwall Alloy Solid Colour Collection — 17 solid colours Wetwall Elite Marble Collection — 18 marble-effect designs Wetwall Elite Stone & Concrete Collection — 14 stone and concrete-effect designs Wetwall Elite Wood & Decor Collection — 6 wood and decor designs Mermaid Collection Wall Panels — Group 1 Mermaid Collection Wall Panels — Group 2 Mermaid Collection Wall Panels — Group 3 Frequently Asked Questions Do I need both adhesive and sealant? For a complete, professional installation you will typically need both: adhesive to bond panels to the wall, and silicone sealant to waterproof all joints and edges. Which silicone should I choose — clear or white? Choose Clear Silicone for an invisible finish suitable for any panel colour. Choose White Silicone for a white finish that blends with white or light-coloured panels. What is the difference between this and Wetwall Complete? This standard Wetwall Adhesive & Sealant is suitable for standard Wetwall panel ranges. Wetwall Complete is specifically required for Elite, Mermaid, and Alloy panels — it also comes in 13 colour-matched sealant options. Using the wrong product on Elite/Mermaid/Alloy panels may void your panel warranty. What is the delivery charge? Free delivery applies to all Wetwall orders over £200. As individual cartridges are priced under £200, a £50 delivery surcharge will be invoiced and payable before delivery. Add Wetwall panels or other accessories to your basket to reach the £200 threshold and avoid the surcharge. Can I order if the item shows as out of stock? Yes — we can accept orders even when stock shows as unavailable. Please contact us at customerservice@bubblegumbathrooms.co.uk or call 01603 381095 to confirm availability and lead time before ordering.

Read more less

Finish sealing and bonding jobs with Soudal Fix All Flexi White 290ml. This multi-use hybrid polymer sealant, adhesive and filler combines a flexible bond with a clean white finish, making it a practical choice for bathroom, kitchen and general installation work. Use it for suitable interior and exterior applications, following the manufacturer's guidance for your materials and conditions.Key Features Multi-use formula: Sealant, adhesive and filler in one cartridge. Hybrid polymer technology: Flexible sealing and bonding for a range of construction materials. Waterproof finish: Suitable for moisture-exposed applications within the manufacturer's recommendations. Mould-resistant: Useful for appropriate kitchen and bathroom sealing tasks. Paintable: Can be overpainted once cured; check paint compatibility first. White finish: For a neat, coordinated result around white fixtures and fittings. 290ml cartridge: Applied using a compatible sealant gun. Typical Applications Suitable sealing around bathroom and kitchen fittings. Sealing suitable window and door frame joints. Bonding skirting boards, architraves and decorative mouldings to compatible substrates. Filling suitable gaps in general interior and exterior installation work. Technical Specification Brand: Soudal Range: Fix All Flexi Type: Hybrid polymer sealant, adhesive and filler Colour: White Cartridge volume: 290ml Application: Interior and exterior, subject to product guidance Finish: Flexible and paintable when cured Country of origin: Belgium Product code: 106036 Pack contents: One 290ml cartridge Application GuidanceCheck the current Soudal technical guidance for substrate suitability, surface preparation, application temperature and curing requirements before use. Test adhesion and paint compatibility on a discreet area. For specialist panel systems, use the adhesive and sealant specified by the panel manufacturer rather than assuming a general-purpose product is suitable.Frequently Asked QuestionsIs Fix All Flexi a silicone sealant?It is a hybrid polymer sealant and adhesive, rather than a conventional silicone sealant.What materials can it bond to?The existing product specification lists wood, metal, glass, concrete, brick, ceramics and many plastics. PE, PP and PTFE are excluded. Check Soudal's guidance for your exact substrate and test suitability before application.Can I paint over it?Yes, it is paintable once cured. Check compatibility with your chosen paint and follow the recommended curing requirements before decorating.Can it be applied to damp surfaces?Fix All Flexi is listed as suitable for damp-surface bonding. Follow Soudal's preparation and application instructions for the conditions on site; do not assume this makes it suitable for every submerged or specialist application.Can I collect from your Norwich showroom?Contact us on 01603 381095 to confirm stock and arrange collection before travelling.Can I order if the item shows as out of stock?Yes, orders are accepted when stock shows as zero. Contact customerservice@bubblegumbathrooms.co.uk or call 01603 381095 to confirm availability and lead time.Delivery InformationThis is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.Complete Your InstallationWorking on a Fibo panel installation? These dedicated Fibo products are available separately. Follow the panel manufacturer's instructions when selecting installation products. Fibo Panel Adhesive 290ml Fibo Waterproof Sealant 290ml

Read more less

🏷️ Clearance item — Norwich showroom stock only. Will not be restocked. Available while stocks last. Sika Instant Nails is a professional-grade, solvent-free adhesive that delivers exceptional bond strength and quick grab properties. This versatile gap-filling adhesive replaces mechanical fixings in countless home improvement and trade applications — and works on damp surfaces too. Key Features Solvent-free — environmentally friendly formulation with water clean-up Exceptional bond strength — adheres to most common surfaces quickly and securely Quick grab — works on vertical and horizontal surfaces without slipping Gap filling — fills voids and uneven surfaces for superior adhesion Overpaintable — dries white and accepts paint for seamless finishes Works on damp surfaces — no need to wait for complete drying Ideal Applications Bonding dado rails, architrave, and skirting boards Fixing wall cladding to internal walls or timber battens Securing battens directly to walls without fastenings Installing carpet gripper systems without nails or tacks Bonding stair nosing to concrete or wooden stairs Fixing aluminium panels to frameworks Compatible Materials Wood, metal, PVC, most plastics, glass, aluminium, concrete, render, stone, paper, cork, ceramics, plaster, plasterboard, rockwool, PU foam board, Styrofoam, breeze block, and more. Technical Specification Brand: Sika Type: Solvent-free gap-filling adhesive Weight: 0.5kg Open time: Maximum 10 minutes at +23°C and 50% R.H. Initial cure: 30 minutes Final cure: 24–48 hours (depending on substrate) Application: Surfaces should be clean, dry or damp (not wet) Country of Origin: CH (Switzerland) SKU: SIKA Barcode: 5029347000561 Frequently Asked Questions What surfaces does it bond to? Sika Instant Nails bonds to wood, metal, PVC, most plastics, glass, aluminium, concrete, render, stone, paper, cork, ceramics, plaster, plasterboard, rockwool, PU foam board, Styrofoam, and breeze block. Can it be used on damp surfaces? Yes — it works on damp (not wet) surfaces, so you don't need to wait for complete drying before applying. Is this a clearance item? Yes — this is an end-of-line clearance product available from our Norwich showroom only. Stock is limited and will not be restocked. Collection only.

Read more less

Nuance BB Complete Panel Adhesive is the only adhesive approved by Nuance for installing their waterproof wall panels — and using it is mandatory to validate the 15-year watertight guarantee. Originally developed for the aerospace industry, the aircraft-grade formula delivers superior flexibility and bond strength that far exceeds conventional silicone adhesives, which shrink and degrade over time. One 290ml cartridge covers a minimum of one 1200×2420mm panel. Key Features Aircraft-grade aerospace formula — unmatched bond strength and long-term durability Superior flexibility — accommodates thermal expansion and building movement without failure Won't shrink or degrade — unlike silicone, maintains bond integrity over time 100% waterproof — complete moisture barrier for wet rooms, showers, and bathrooms Mandatory for Nuance 15-year watertight guarantee — the only approved adhesive Faster installation — no grouting, no lengthy curing, no grout line water ingress Technical Specification Brand: Nuance by Bushboard (Wilsonart) Type: High-performance panel adhesive Volume: 290ml cartridge Colour: Neutral Technology: Aircraft-grade aerospace formula Waterproof rating: 100% waterproof Coverage: Minimum 1 tube per 1200×2420mm panel Application: Interior wet areas and bathrooms Country of Origin: GB (United Kingdom) SKU: 530686 HS Code: 3506.10 What's Included 1 × 290ml neutral panel adhesive cartridge Requires a standard sealant gun for application. Complete the Nuance Collection Nuance BB Complete Colour Matched Sealant 290ml — available in 10 colours to match your panels Nuance Wall Panel Set A3 — corner panels up to 1200×1200mm, 7 colours Nuance Wall Panel Set B3 — corner panels up to 1200×1800mm, 6 colours Nuance Wall Panel Set F3 — recess panels up to 1200×1200×2400mm, 3 colours Nuance Wall Panel Set D3 — recess panels up to 1200×1200×1200mm, 5 colours Browse the full Nuance Wall Panelling range Frequently Asked Questions Is this adhesive mandatory for the Nuance guarantee? Yes — use of Nuance BB Complete Panel Adhesive is mandatory to validate the Nuance 15-year watertight guarantee. Using any other adhesive will void the guarantee. How much adhesive do I need per panel? Nuance recommends a minimum of one full 290ml tube per 1200×2420mm panel to ensure proper adhesion and guarantee validation. Why is it better than silicone? Conventional silicone adhesives shrink and degrade over time, compromising the bond. Nuance BB Complete uses an aircraft-grade aerospace formula that remains flexible and maintains bond integrity for decades, accommodating thermal expansion and building movement without failure. What equipment do I need? A standard sealant gun is required to apply the adhesive from the 290ml cartridge. Can I order if the item shows as out of stock? Yes — this product is available to order even when stock shows as zero. Please allow additional lead time and contact us at customerservice@bubblegumbathrooms.co.uk or call 01603 381095 to confirm availability.

Read more less